Yuanfa Liu

Lipid Composition Analysis of Milk Fats from Different Mammalian Species: Potential for Use as Human Milk Fat Substitutes

The lipid compositions of commercial milks from cow, buffalo, donkey, sheep, and camel were compared with that of human milk fat (HMF) based on total and sn-2 fatty acid, triacylglycerol (TAG), phospholipid, and phospholipid fatty acid compositions and melting and crystallization profiles, and their degrees of similarity were digitized and differentiated by an evaluation model. The results showed that these milk fats had high degrees of similarity to HMF in total fatty acid composition. However, the degrees of similarity in other chemical aspects were low, indicating that these milk fats did not meet the requirements of human milk fat substitutes (HMFSs). However, an economically feasible solution to make these milks useful as raw materials for infant formula production could be to modify these fats, and a possible method is blending of polyunsaturated fatty acids (PUFA) and 1,3-dioleoyl-2-palmitoylglycerol (OPO) enriched fats and minor lipids based on the corresponding chemical compositions of HMF.

Isolation and structural characterization of a polysaccharide from fruits of Zizyphus jujuba cv. Junzao

A water-soluble polysaccharide (ZP2a) was obtained by extraction with hot water followed by successive chromatographic purification using anion exchange and Sepharose CL-6B columns. A symmetrical narrow peak was obtained on high-performance gel permeation chromatography with an average molecular weight of 120,645 Da, which was named ZP2a. ZP2a is composed of rhamnose, arabinose, glucose and galactose in the molar ratio 1.3:1.7:0.3:1. Based on gas chromatographic, infrared spectral, methylation and NMR analyses, ZP2a was structurally characterized as 1,4-D-GalpA residues interspersed with 1,2-L-Rhap and 1,2,4-L-Rhap residues. The branches were composed of 1,5-L-Araf, 1,3,5-L-Araf, 1,3-L-Araf, 1,6-D-Galp, 1,4,6-D-Galp and 1,4-D-Glcp. The branches were attached to the backbone at the O-4 position of Rhap residues.

Lipase-catalyzed preparation of human milk fat substitutes from palm stearin in a solvent-free system.

Human milk fat substitutes (HMFSs) were synthesized by lipozyme RM IM-catalyzed acidolysis of chemically interesterified palm stearin (mp = 58 °C) with mixed FAs from rapeseed oil, sunflower oil, palm kernel oil, stearic acid, and myristic acid in a solvent-free system. Response surface methodology (RSM) was used to model and optimize the reactions, and the factors chosen were reaction time, temperature, substrate molar ratio, and enzyme load. The optimal conditions generated from the models were as follows: reaction time, 3.4 h; temperature, 57 °C; substrate molar ratio, 14.6 mol/mol; and enzyme load, 10.7 wt % (by the weight of total substrates). Under these conditions, the contents of palmitic acid (PA) and PA at sn-2 position (sn-2 PA) were 29.7 and 62.8%, respectively, and other observed FAs were all within the range of FAs of HMF. The product was evaluated by the cited model, and a high score (85.8) was obtained, which indicated a high degree of similarity of the product to HMF.

A strategy for the highly efficient production of docosahexaenoic acid by Aurantiochytrium limacinum SR21 using glucose and glycerol as the mixed carbon sources.

Glucose and glycerol are useful carbon sources for the cultivation of Aurantiochytrium limacinum SR21. Glucose facilitates rapid growth and lipid synthesis, and glycerol promotes the accumulation of docosahexaenoic acid (DHA) in A. limacinum SR21. To improve the DHA productivity of A. limacinum SR21, shake flask and fed-batch cultures were performed using glucose and glycerol as mixed carbon sources (MCSs). Along with optimization of the MCSs, the best DHA yield and productivity (32.36 g/L and 337.1 mg/L/h) were obtained via fed-batch fermentation with maintenance of a constant air supply. The DHA productivity was 15.24% higher than that obtained using glucose as single carbon source (SCS). This study presents a highly efficient and economic strategy for the production of DHA by A. limacinum SR21.

Interfacial structural role of pH-shifting processed pea protein in the oxidative stability of oil/water emulsions.

Understanding the behavior of protein surfactants at the oil-water interface is essential to the design of physicochemically stable emulsions. The objective of the study was to investigate the steric role of an interfacial membrane made of structurally modified pea protein with alkaline pH treatment (APP) in the oxidative stability of oil-in-water emulsions. Confocal laser scanning microscopy depicted more uniform and smaller oil droplets that had a reduced tendency to coalesce for emulsions prepared with APP than with native pea protein (NPP). Correspondingly, the APP emulsions were less prone to oxidation (malonaldehyde, peroxide) during storage. Similarly, cryo-transmission electron microscopy revealed more uniform air pockets with smoother undersurface that were surrounded by partially coalesced emulsions in whipped creams prepared with APP than with NPP. The improved interfacial properties and steric hindrance played a crucial role in the inhibition of oxidation in emulsions by alkaline pH-modified pea protein.

Model for Human Milk Fat Substitute Evaluation Based on Triacylglycerol Composition Profile

Being the dominant components in human milk fat (HMF), triacylglycerol (TAG) composition might be the best approximation index to represent the composing characteristics of HMF. In this study, TAG composition of HMF from different lactation stages was analyzed by RP-HPLC-APCI-MS, and the establishment of a model for the precise evaluation of human milk fat substitutes (HMFSs) based on TAG composition was indirectly realized by employment of fatty acid composition and distribution and polyunsaturated fatty acid (PUFA) and TAG compositions. The model was verified by the selected fats and oils with specific chemical compositions, and the results revealed the degrees of similarity of these fats and oils in different evaluation aspects reflected their differences in corresponding chemical composition with HMF. The newly established evaluation model with TAG composition as a comparison base could provide a more accurate method to evaluate HMFSs and might have some inspirations for HMFS production in the future.

In vitro toxicity of aflatoxin B1 and its photodegradation products in HepG2 cells

The effects of aflatoxin B1 (AFB1) were studied using the HepG2 cell line. Cytotoxicity, apoptosis and p53 expression were assessed after exposure to different concentrations of AFB1 (0–100 μm) and its two types of degradation products, namely the mixtures of photodegradation products in water (Pw) and the mixtures of photodegradation products in peanut oil (Po) for different time periods (0, 24, and 48 h). After exposure of the HepG2 cells to these compounds for different times and concentrations, the cytotoxicity of Pw and Po decreased approximately 40 and 100% compared with AFB1, respectively. The expression of p53 protein decreased significantly in AFB1‐exposed cells, decreased slightly in Pw‐treated cells and did not decrease compared to the untreated cells. The results of the in vitro cytotoxicity assay indicate that Pw is less toxic than AFB1, and Po has almost no toxicity, which can be explained by the differences in the chemical nature of the various kinds of the test compounds. Copyright

Enhanced arachidonic acid production from Mortierella alpina combining atmospheric and room temperature plasma (ARTP) and diethyl sulfate treatments

To obtain mutant strains with higher arachidonic acid (ARA) yields, the oleaginous fungus Mortierella alpina was mutated using atmospheric and room temperature plasma (ARTP) coupled with diethyl sulfate (DES). A visual compound filter operation was used in which a screening medium was supplemented with cerulenin, an inhibitor of fatty acid synthase (FAS), and triphenyltetrazolium chloride (TTC). The mutant strain D20 with an ARA production of 5.09 g/L, a 40.61% increase over the original strain (3.62 g/L), was isolated. The relative ARA content increased from 38.99% to 45.64% of total fatty acids. After optimizing fermentation conditions, the maximum ARA yield (6.82 g/L) for strain D20 was obtained in shake flasks. This work provides an appropriate strategy for obtaining high ARA-yield strains by conventional random mutation methods with an efficient screening assay.

Composition and antioxidant activity of polysaccharides from jujuba by classical and ultrasound extraction

Crude Zizyphus Jujuba cv. Junzao polysaccharides (CZP) were extracted by hot water and ultrasound-assisted extraction respectively. Using a short application of ultrasound, the yield of polysaccharides increased from 6.23 to 7.95%, which represents an increase of about 27.6%. Both CZPU and CZPH were composed of arabinose, rhamnose, glucose, galactose, and mannose. However, the molar ratio of CZPU was 5.46: 4.96: 5.17: 2.63: 1, while it was 5.46: 4.89: 3.65: 2.54: 1 for CZPH. Furthermore, CZPU had stronger antioxidant activities than CZPH by evaluating in hydroxyl radical and ferric-reducing antioxidant power (FRAP) assay.

Enzymatically catalyzed synthesis of low-calorie structured lipid in a solvent-free system: optimization by response surface methodology.

A kind of low-calorie structured lipid (LCSL) was obtained by interesterification of tributyrin (TB) and methyl stearate (St-ME), catalyzed by a commercially immobilized 1,3-specific lipase, Lipozyme RM IM from Rhizomucor miehei . The condition optimization of the process was conducted by using response surface methodology (RSM). The optimal conditions for highest conversion of St-ME and lowest content LLL-TAG (SSS and SSP; S, stearic acid; P, palmitic acid) were determined to be a reaction time 6.52 h, a substrate molar ratio (St-ME:TB) of 1.77:1, and an enzyme amount of 10.34% at a reaction temperature of 65 °C; under these conditions, the actually measured conversion of St-ME and content of LLL-TAG were 78.47 and 4.89% respectively, in good agreement with predicted values. The target product under optimal conditions after short-range molecular distillation showed solid fat content (SFC) values similar to those of cocoa butter substitutes (CBS), cocoa butter equivalent (CBE), and cocoa butters (CB), indicating its application for inclusion with other fats as cocoa butter substitutes.