Yucheng Peng

Drying cellulose nanofibrils: in search of a suitable method

Increasing research activity on cellulose nanofibril-based materials provides great opportunities for novel, scalable manufacturing approaches. Cellulose nanofibrils (CNFs) are typically processed as aqueous suspensions because of their hydrophilic nature. One of the major manufacturing challenges is to obtain dry CNFs while maintaining their nano-scale dimensions. Four methods were examined to dry cellulose nanocrystal and nanofibrillated cellulose suspensions: (1) oven drying, (2) freeze drying (FD), (3) supercritical drying (SCD), and (4) spray-drying (SD). The particle size and morphology of the CNFs were determined via dynamic light scattering, transmission electron microscopy, scanning electron microscopy, and morphological analysis. SCD preserved the nano-scale dimensions of the cellulose nanofibrils. FD formed ribbon-like structures of the CNFs with nano-scale thicknesses. Width and length were observed in tens to hundreds of microns. SD formed particles with a size distribution ranging from nanometer to several microns. Spray-drying is proposed as a technically suitable manufacturing process to dry CNF suspensions.

Influence of drying method on the surface energy of cellulose nanofibrils determined by inverse gas chromatography

Research and development of the renewable nanomaterial cellulose nanofibrils (CNFs) has received considerable attention. The effect of drying on the surface energy of CNFs was investigated. Samples of nanofibrillated cellulose (NFC) and cellulose nanocrystals (CNC) were each subjected to four separate drying methods: air-drying, freeze-drying, spray-drying, and supercritical-drying. The surface morphology of the dried CNFs was examined using a scanning electron microscope. The surface energy of the dried CNFs was determined using inverse gas chromatography at infinite dilution and column temperatures: 30, 40, 50, 55, and 60 °C. Surface energy measurements of supercritical-dried NFCs were performed also at column temperatures: 70, 75, and 80 °C. Different drying methods produced CNFs with different morphologies which in turn significantly influenced their surface energy. Supercritical-drying resulted in NFCs having a dispersion component of surface energy of 98.3±5.8 mJ/m(2) at 30 °C. The dispersion component of surface energy of freeze-dried NFCs (44.3±0.4 mJ/m(2) at 30 °C) and CNCs (46.5±0.9 mJ/m(2) at 30 °C) were the lowest among all the CNFs. The pre-freezing treatment during the freeze-drying process is hypothesized to have a major impact on the dispersion component of surface energy of the CNFs. The acid and base parameters of all the dried CNFs were amphoteric (acidic and basic) although predominantly basic in nature.

Southern pine impregnated with silicate solution containing cellulose nanofibrils

Abstract A drying process has been tested to impregnate southern pine (Pinus spp.) samples with sodium silicate solution. The effect of adding cellulose nanofibrils in the treating solution was also studied. The mechanical tests show that the flexural modulus of rupture (MOR) and modulus of elasticity (MOE) increased significantly with increasing concentration of sodium silicate. The highest MOR and MOE of the treated samples were 170±13 MPa and 19±1 GPa, respectively, while the corresponding data of the control sample were 98±8 MPa and 11±1 GPa respectively. Deposition of polymerized silicate in the wood cell lumina was observed. The compression strength was improved by the incorporation of polymerized silicate to increase the measured flexural properties. The presence of cellulose nanofibrils in the sodium silicate solution had no effect.