Yuhlong Oliver Su

Excited state luminescence of multi-(5-phenyl-1,3,4-oxadiazo-2-yl)benzenes in an electron-donating matrix: exciplex or electroplex?

Multi-(5-phenyl-1,3,4-oxadiazo-2-yl)benzenes show emission in organic solvents from ultraviolet to blue (339-447 nm). The reduction potentials E(1/2)(red) cover a large range of -2.11 V for 2,5-diphenyl-1,3,4-oxadiazole to -0.76 V for 1,2,3,4,5,6-hexa(5-phenyl-1,3,4-oxadiazo-2-yl)benzene. An unexpectedly wide spectral range of the oxadiazole (OXD) exciplex emissions in PVK is observed, ranging from 406 to 603 nm. The OXDs also exhibit similar electroluminescence (EL) when blended into polyvinylcarbazole (PVK). A linear correlation between the lambda(max) of the electroluminescence and photoluminescence is observed, implying that the emission mechanisms in both processes are similar. In addition, the linear correlation between the E(1/2)(red) versus lambda(max) of EL (eV) reflected that the term of the charge-transfer configuration of the contact electron-hole pair plays a major role in the exciplex emission. The exciplex EL of 1,2,5-tri(5-phenyl-1,3,4-oxadiazo-2-yl)benzene (5) could be as high as 1.0 cd/A. Since the exciplex emission usually has a large Stokes shift, this provides a window for us to generate duo emissions for near white light EL with high efficiency. Among the devices we tried, the device of PVK/2-tert-butylphenyl-5-biphenyl-1,3,4-oxadiazole/5/2,5,8,11-tetra-tert-butylperylene (100:40:40:4) gave EL with good current efficiency of 1.63 cd/A.

Spectral and redox properties of zinc porphyrin core dendrimers with triarylamines as dendron

The first and second generation of zinc porphyrin core dendrimers (3 and 4) with triarylamine as dendron have been synthesized via Ullmann coupling reaction. Their absorption and emission spectra indicate that there are strong interactions between zinc porphyrin core and triarylamine dendrons. Zinc porphyrin links with triarylamine causes Soret band broadening and Q band shift as compared with ZnTPP. Because of the antenna effect on these dendrimers, the fluorescence quantum yields were strongly enhanced when more triarylamine moieties were linked. Cyclic voltammetry and spectroelectrochemical methods were used to investigate the redox properties of dendrimers. Axial ligation of zinc porphyrin with N-methylimidazole is useful in differentiating the oxidation site of dendrimers. For the first generation dendrimer (3), porphyrin ring oxidation potential shifts cathodically because the periphery dendrons are strong electron-donating groups. On the other hand, the dendrons of the second generation (4) are oxidized first and generate an atmosphere of eight positive charges. The porphyrin ring core is then oxidized with an anodic shift in potential due to the electron-withdrawing effect of the oxidized substituents.

Redox Potential Inversion by Ionic Hydrogen Bonding between Phenylenediamines and Pyridines

In electrochemical oxidations, the second oxidation potential of phenylenediamines (PD) varies because of hydrogen-bonding formation for PD(+•) with pyridines. A linear relationship was obtained for the potential shift as a function of pK(a) of the protonated pyridines and potential inversion could be observed. The oxidized PD(+•) could also form hydrogen bonding with alcohols and the shift of potential exhibits a different pattern.

Electrochemically Controlled Multiple Hydrogen Bonding between Triarylamines and Imidazoles

By increasing the number of amino substituents on triarylamine, the extent of hydrogen bonding between the oxidized form of triarylamine and imidazole could be electrochemically controlled. Three behaviors, depending on the interaction between oxidized amine and imidazole, were obtained in CV patterns. DFT calculation was used to confirm that the electron density of protons of the amino group decreased as the amino moiety increased.

Studies on the Structure of N-Phenyl-Substituted Hexaaza[16]paracyclophane: Synthesis, Electrochemical Properties, And Theoretical Calculation

The N-phenyl-substituted hexaaza[1(6)]paracyclophane (3, hexamer) has been synthesized successfully in two steps and the noncoplanar conformation was calculated by gaussian program. The electrochemical properties exhibited lots of interesting results and each overlapping oxidative wave contained two-electron transfer.

Linear oligoarylamines: electrochemical, EPR, and computational studies of their oxidative states.

A series of straight-chain oligoarylamines were synthesized and examined by electrochemical, spectroelectrochemical, electron paramagnetic resonance techniques, and density functional theory (DFT) calculation. Depending on their electrochemical characteristics, these oligoarylamines were classified into two groups: one containing an odd number and the other an even number of redox centers. In the systems with odd redox centers (N1, N3, and N5), each oxidation was associated with the loss of one electron. As for the systems with even redox centers (N2, N4, and N6), oxidation occurred by taking N2 as a unit. Absorption spectra of linear oligoarylamines at various oxidative states were obtained to investigate their charge transfer behaviors. Moreover, DFT-computed isotropic hyperfine coupling constants and spin density were in accordance with the EPR experiment, and gave a close examination of oligoarylamines at charged states.

Novel triarylamine-based aromatic polyamides bearing secondary amines: synthesis and redox potential inversion characteristics induced by pyridines

Novel triarylamine-based aramids with secondary amine moieties are prepared and utilized as electrochemical detectors for pyridines. Their electrochemical behavior with different pyridines was investigated in order to demonstrate the ionic hydrogen bonding interaction of the secondary amine with the pyridines, resulting in obvious potential inversion which is also supported by in situ absorption measurements.

Photothermoelectric Effects in Nanoporous Silicon

The first observation of the photothermoelectric effect in a nanoporous silicon (NPSi) device indicates that the photocurrent is dependent on the position of light-induced local heating from illumination at the Au-electrode/NPSi interface.

Determination of carbamazepine: a comparison of the differential pulse voltammetry (DPV) method and the immunoassay method in a clinical trial

We conducted a clinical trial to analyze human serum containing carbamazepine by using the differential pulse voltammetry (DPV) method with a glassy carbon electrode, and compared it with the fluorescence polarization immunoassay (FPIA). Thirty patients, who visited our hospital to have their serum carbamazepine level checked, were enrolled. Ten mL of venous blood was collected from each patient and analyzed by DPV and FPIA methods. The correlation between the carbamazepine concentrations determined by DPV and FPIA was good, with an RSQ of 0.998. The similarity of the results indicates that these two methods can be used interchangeably. The DPV method using a glassy carbon electrode may be a potential alternative method to determine the carbamazepine level in human serum.

Functional graded fullerene derivatives for improving the fill factor and device stability of inverted-type perovskite solar cells

A graded fullerene derivative thin film was used as a dual-functional electron transport layer (ETL) in CH3NH3PbI3 (MAPbI3) solar cells, to improve the fill factor (FF) and device stability. The graded ETL was made by mixing phenyl-C61-butyric acid methyl ester (PCBM) molecules and C60-diphenylmethanofullerene-oligoether (C60-DPM-OE) molecules using the spin-coating method. The formation of the graded ETLs can be due to the phase separation between hydrophobic PCBM and hydrophilic C60-DPM-OE, which was confirmed by XPS depth-profile analysis and an electron energy-loss spectroscope. Comprehensive studies were carried out to explore the characteristics of the graded ETLs in MAPbI3 solar cells, including the surface properties, electronic energy levels, molecular packing properties and energy transfer dynamics. The elimination of the s-shape in the current density-voltage curves results in an increase in the FF, which originates from the smooth contact between the C60-DPM-OE and hydrophilic MAPbI3 and the formation of the more ordered ETL. There was an improvement in device stability mainly due to the decrease in the photothermal induced morphology change of the graded ETLs fabricated from two fullerene derivatives with distinct hydrophilicity. Consequently, such a graded ETL provides dual-functional capabilities for the realization of stable high-performance MAPbI3 solar cells.