Yushu Bai

Application of 3D rapid prototyping technology in posterior corrective surgery for Lenke 1 adolescent idiopathic scoliosis patients.

Abstract A retrospective study to evaluate the effectiveness of 3-dimensional rapid prototyping (3DRP) technology in corrective surgery for Lenke 1 adolescent idiopathic scoliosis (AIS) patients. 3DRP technology has been widely used in medical field; however, no study has been performed on the effectiveness of 3DRP technology in corrective surgery for Lenke 1 AIS patients. Lenke 1 AIS patients who were preparing to undergo posterior corrective surgery from a single center between January 2010 and January 2012 were included in this analysis. Patients were divided into 2 groups. In group A, 3-dimensional (3D) printing technology was used to create subject-specific spine models in the preoperative planning process. Group B underwent posterior corrective surgery as usual (by free hand without image guidance). Perioperative and postoperative clinical outcomes were compared between 2 groups, including operation time, perioperative blood loss, transfusion volume, postoperative hemoglobin (Hb), postoperative complications, and length of hospital stay. Radiological outcomes were also compared, including the assessment of screw placement, postoperative Cobb angle, coronal balance, sagittal vertical axis, thoracic kyphosis, and lumbar lordosis. Subgroup was also performed according to the preoperative Cobb angle: mean Cobb angle <50° and mean Cobb angle >50°. Besides, economic evaluation was also compared between 2 groups. A total of 126 patients were included in this study (group A, 50 and group B, 76). Group A had significantly shorter operation time, significantly less blood loss and transfusion volume, and higher postoperative Hb (all, P < 0.001). However, no significant differences were observed in complication rate, length of hospital stay, and postoperative radiological outcomes between 2 groups (all, P>0.05). There was also no significant difference in misplacement of screws in total populations (16.90% vs 18.82%, P = 0.305), whereas a low misplacement rate of pedicle screws was observed in patients whose mean Cobb angle was >50° (9.15% vs 13.03%, P = 0.02). Besides, using 3DRP increased the economic burden of patients (157,000 ± 9948.85 Ren Min Bi (RMB) vs 152,500 ± 11,445.52 RMB, P = 0.03). Using the 3D printing technology before posterior corrective surgery might reduce the operation time, perioperative blood loss, and transfusion volume. There did not appear to be a benefit to using this technology with respect to complication rate and postoperative radiological outcomes; however, 3D technology could reduce the misplacement rate in patients whose preoperative mean Cobb angle was >50°. Besides, it also increased the patients’ hospital cost. Therefore, future prospective studies are needed to elucidate the efficacy of this emerging technology.

Correction of Lenke 5 adolescent idiopathic scoliosis using pedicle screw instrumentation: does implant density influence the correction?

Study Design. A single-center, retrospective study of 39 consecutive patients with Lenke 5 adolescent idiopathic scoliosis (AIS), all operated by a single surgeon using identical surgical technique and type of instrumentation (pedicle screws). Objective. The objective of this study is to evaluate the effect of implant density on coronal and sagittal correction in the treatment of Lenke 5 AIS. Summary of Background Data. There is an increasing trend in the use of pedicle screws in spinal corrective surgery. It is reported that decreased numbers of pedicle screws (low screw density) have no effects on the clinical outcomes for patients with Lenke 1 AIS. However, no previous studies have investigated the effects of reduced density of screw implantation on coronal correction and sagittal lumbar lordosis in patients with Lenke 5 AIS. Methods. Thirty-nine consecutive patients with Lenke 5 AIS underwent single-stage posterior correction and instrumented spinal fusion with pedicle screw fixation between 2006 and 2010. The radiographs were analyzed before surgery, immediately after surgery, and at the 2-year follow-up. General information of patients was recorded. Pearson correlation analysis was used to analyze the correlation between implant density, coronal Cobb angle correction, and correction index (postoperative correction/preoperative curve flexibility). The relations between implant density and magnitude of coronal and sagittal curve correction were also investigated. Results. The mean patient age at the time of operation was 14.5 years. The mean preoperative lumbar curve of 48.5° ± 9.2° was corrected to 13.7° ± 7.2° (72% correction) at a 2-year follow-up. There was a significant correlation between implant density and curve correction (r = 0.43, P < 0.05). No correlation was detected between implant density and correction index (r = −0.21, P = 0.20), and there was also no correlation between implant density and magnitude of sagittal curve correction (r = 0.065, P = 0.693). Conclusion. Without curve flexibility taken into consideration, implant density is positively correlated with thoracolumbar or lumbar coronal Cobb curve correction. No significant correlation is found between screw density and correction index, if the effect of the flexibility was eliminated. There was no association between implant density and magnitude of sagittal curve correction before and after surgery. Level of Evidence: 4

Knockdown of Akt Sensitizes Osteosarcoma Cells to Apoptosis Induced by Cisplatin Treatment

Akt plays an important role in the inhibition of apoptosis induced by chemotherapy and other stimuli. We therefore investigated if knockdown of Akt2 promoted drug-induced apoptosis in cultured osteosarcoma cells in vitro. SAOS-2 cells were transfected with Akt2 siRNA. The sensitivity of the transformed cell line to the chemotherapeutic drug cisplatin was assessed. Reduced expression of Akt2 did not directly inhibit the growth rate of the transfected cells; however, it significantly increased their sensitivity to cisplatin. Knockdown of Akt2, together with cisplatin treatment, promoted the expression of p53 up-regulated modulator of apoptosis (PUMA). It is possible that the augmentation of cisplatin cytotoxicity may be mediated by PUMA activation. The results of this study suggest that knockdown of Akt2 expression may have therapeutic applications in enhancing the efficacy of chemotherapy in patients with osteosarcoma.

Development of a simplified Chinese version of the hip disability and osteoarthritis outcome score (HOOS): cross-cultural adaptation and psychometric evaluation

Osteoarthritis (OA) has a profound impact on health-related quality of life 1 . Increasing importance has been attached to utilization of disease-specific, self-reported outcome measures 2 , such as the Hip Disability and Osteoarthritis Outcome Score (HOOS) instrument 3 . China is the most populous country in the world with 1.3 billion people. Hence, we translated and adapted the HOOS into a Simplified Chinese version (SC-HOOS) and validated it in a cohort of native Chinese-speaking patients with hip OA, relative to the Short Form Health Survey (SF-36), a visual analog scale (VAS), and the Harris hip score (HHS) test. Psychometric testing for internal consistency, testeretest reliability, construct validity, and responsiveness was conducted. The SC-HOOS showed satisfactory internal consistency, testeretest reliability, construct validity, and responsiveness when evaluated in Chinese-speaking patients with hip OA.

Surgical treatment of transverse patella fractures by the cable pin system with a minimally invasive technique.

BACKGROUND: Transverse patella fractures are the most common type of patella fractures. Minimally invasive surgical technique for treatment of transverse patella fractures with the Cable Pin System has not been previously reported. METHODS: Thirty-four patients with displaced transverse fractures of the patella were included in this prospective study and were operatively treated by the Cable Pin System with a minimally invasive technique. Postoperative evaluation was based on radiographs, Visual Analog Scale of pain, range of motion, and Bostman grading scale. RESULTS: A total of 31 patients were finally included, with an average follow-up period of 21 months. The average operation time was 48 minutes. Intraoperative fluoroscopy was used for 2 to 4 times (average: 2.4 times). Radiographic evidence of solid fracture union was observed in all cases in a mean period of 7.2 weeks. The Visual Analog Scale score for pain was 3.3 ± 1.4 and 1.5 ± 1.3 at 4 weeks after surgery and when radiographic fracture healing was achieved, respectively. Twenty-nine patients achieved full knee range of motion, while two patients had 10° loss of full flexion at the final follow-up visit. The average Bostman score was 29.1/30 (range, 27–30) at 1 year after surgery, and an evaluation of “excellent” was observed in 30 patients at the final follow-up visit. CONCLUSION: Surgical treatment of transverse patella fractures by the Cable Pin System with a minimally invasive technique was shown to provide satisfactory clinical results and excellent knee functions, with less pain and low incidence of complications. It could be a new option for treatment of transverse patella fractures. LEVEL OF EVIDENCE: III.

Comparison of the Pedicle Screws Placement Between Electronic Conductivity Device and Normal Pedicle Finder in Posterior Surgery of Scoliosis.

Study Design: Prospective randomized clinical trial. Objective: To compare the accuracy and time using of pedicle screw placement between electronic conductivity device (ECD) and normal pedicle finder (NPF) in posterior surgery of scoliosis, through a randomized clinical trial. Summary of Background Data: Pedicle screw insertion for scoliosis correction can be associated with increased pedicle perforations. The malposition rates using various techniques in different region of the spine have been reported to occur with a frequency of 3.3%–43%. An ECD has been reported in spine surgeries, but its accuracy and surgical time comparing with NPF in the presence of scoliosis has not been reported. Methods: The 42 patients of adolescent idiopathic scoliosis with average major Cobb angle of 55.3±7 degrees (range, 45–78 degrees), who received posterior correction surgeries using pedicle screws system only were divided into 2 groups by random: group NPF (22 patients); and group ECD (20 patients). NPF group had 332 screws and ECD group had 362 screws. The 2 groups were compared for accuracy of screw placement, time for screw insertion, and the number of times the C-arm had to be brought into the field. Results: There were 47 (14.2%) pedicle perforation in the NPF group as compared with only 15 (4.1%) in the ECD group (P<0.001). Although in different region of the spine, screw accuracy showed discrepant statistical result, with upper (T1–T3), middle (T4–T7), and lower thoracic (T8–T10) comparison showing significant statistical difference (P=0.010, 0.001, and 0.041, respectively) and thoracolumbar (T11–L2) and lower lumbar (L3–L5) comparison showing no significant statistical difference (P=0.278 and 0.292, respectively). Average screw insertion time in the NPF group was 241±61 seconds compared with 204±33 seconds in the ECD group (P=0.009). The C-arm had to be moved into the operation field on an average of 1.59±0.67 times in the NPF group compared with 1.20±0.52 in the ECD group (P=0.040). Conclusions: ECD increases pedicle screw accuracy, especially in T1–T10, and reduces insertion time and radiation in posterior adolescent idiopathic scoliosis.

Short term outcome of posterior dynamic stabilization system in degenerative lumbar diseases.

Background: Decompression and fusion is considered as the ‘gold standard’ for the treatment of degenerative lumbar diseases, however, many disadvantages have been reported in several studies, recently like donor site pain, pseudoarthrosis, nonunion, screw loosening, instrumentation failure, infection, adjacent segment disease (ASDis) and degeneration. Dynamic neutralization system (Dynesys) avoids many of these disadvantages. This system is made up of pedicle screws, polyethylene terephthalate cords, and polycarbonate urethane spacers to stabilize the functional spinal unit and preserve the adjacent motion after surgeries. This was a retrospective cohort study to compare the effect of Dynesys for treating degenerative lumbar diseases with posterior lumbar interbody fusion (PLIF) based on short term followup. Materials and Methods: Seventy five consecutive patients of lumbar degenerative disease operated between October 2010 and November 2012 were studied with a minimum followup of 2 years. Patients were divided into two groups according to the different surgeries. 30 patients underwent decompression and implantation of Dynesys in two levels (n = 29) or three levels (n = 1) and 45 patients underwent PLIF in two levels (n = 39) or three levels (n = 6). Clinical and radiographic outcomes between two groups were reviewed. Results: Thirty patients (male:17, female:13) with a mean age of 55.96 ± 7.68 years were included in Dynesys group and the PLIF group included 45 patients (male:21, female:24) with a mean age of 54.69 ± 3.26 years. The average followup in Dynesys group and PLIF group was 2.22 ± 0.43 year (range 2-3.5 year) and 2.17 ± 0.76 year (range 2-3 year), respectively. Dynesys group showed a shorter operation time (141.06 ± 11.36 min vs. 176.98 ± 6.72 min, P < 0.001) and less intraoperative blood loss (386.76 ± 19.44 ml vs. 430.11 ± 24.72 ml, P < 0.001). For Dynesys group, visual analogue scale (VAS) for back and leg pain improved from 6.87 ± 0.80 to 2.92 ± 0.18 and 6.99 ± 0.81 to 3.25 ± 0.37, (both P < 0.001) and for PLIF, VAS for back and leg pain also improved significantly (6.97 ± 0.84–3.19 ± 0.19 and 7.26 ± 0.76–3.56 ± 0.38, both P < 0.001). Significant improvement was found at final followup in both groups in Oswestry disability index (ODI) score (both P < 0.001). Besides, Dynesys group showed a greater improvement in ODI and VAS back and leg pain scores compared with the PLIF group (P < 0.001, P = 0.009 and P = 0.031, respectively). For radiological, height of the operated level was found increased in both groups (both P < 0.001), but there was no difference between two groups (P = 0.93). For range of motion (ROM) of operated level, significant decrease was found in both groups (P < 0.001), but Dynesys showed a higher preservation of motion at the operative levels (P < 0.001). However, no significant difference was found in the percentage change of ROM of adjacent levels between Dynesys and PLIF (0.74 ± 8.92% vs. 0.92 ± 4.52%, P = 0.91). Some patients suffered from degeneration of adjacent intervertebral disc at final followup, but there was no significant difference in adjacent intervertebral disc degeneration between two groups (P = 0.71). Moreover, there were no differences in complications between Dynesys and PLIF (P = 0.90), although the incidence of complication in Dynesys was lower than PLIF (16.67% vs. 17.78%). Conclusion: Dynamic stabilization system treating lumbar degenerative disease showed clinical benefits with motion preservation of the operated segments, but does not have the significant advantage on motion preservation at adjacent segments, to avoid the degeneration of adjacent intervertebral disk.

Radiographic Parameters in Adult Degenerative Scoliosis and Different Parameters Between Sagittal Balanced and Imbalanced ADS Patients.

Abstract A retrospective study. To summarize and describe the radiographic parameters of adult degenerative scoliosis (ADS) and explore the radiological parameters which are significantly different in sagittal balanced and imbalanced ADS patients. ADS is the most common type of adult spinal deformity. However, no comprehensive description of radiographic parameters in ADS patients has been made, and few studies have been performed to explore which radiological parameters are significantly different between sagittal balanced and imbalanced ADS patients. Medical records of ADS patients in our outpatient clinic from January 2012 to January 2014 were reviewed. Demographic data including age and sex, and radiographic data including the coronal Cobb angle, location of apical vertebra/disc, convexity of the curve, degree of apical vertebra rotation, curve segments, thoracic kyphosis (TK), lumbar lordosis (LL), thoracolumbar kyphosis (TL), sacral slope (SS), pelvic tilt (PT), pelvic incidence (PI), sagittal vertical axis (SVA), and PI minus LL (PI − LL) were reviewed to make comprehensive description of radiographic parameters of ADS. Furthermore, patients were divided into 2 groups according to whether the patients’ sagittal plane was balanced: Group A (imbalanced, SVA > 5 cm) and Group B (balanced, SVA ⩽ 5 cm). Demographic and radiological parameters were compared between these 2 groups. A total of 99 patients were included in this study (Group A = 33 and Group B = 66; female = 83 and male = 16; sex ratio = 5:1). The median of age were 67 years (range: 41–92 years). The median of coronal Cobb angle and length of curve was 23 (range: 10–75°) and 5 segments (range: 3–7), respectively. The most common location of apical vertebra was at L2 to L3 (81%) and the median of degree of apical vertebra rotation was 2° (range: 1–3). Our study also showed significant correlations between coronal Cobb angle and curve segments (r = 0.23, P < 0.005) and degree of apical vertebra rotation (r = 0.53, P < 0.005). With regard to the sagittal balance, there were significant differences in age, LL, PT, coronal Cobb angle, degree of apical vertebra rotation, and PI − LL between imbalanced group and balanced group (all P < 0.05); however, no significant difference was observed in gender, TK, TL, SS, and PI. Our study provided the general radiographic parameters of ADS. Weak or moderate but significant correlations between coronal Cobb angle and curve segments and degree of apical vertebra rotation were observed. Furthermore, age, coronal Cobb angle, LL, PT, and PI − LL were significantly different between sagittal balanced and imbalanced ADS patients.

A valid cross-culturally adapted simplified Chinese version of the Quebec Back Pain Disability Scale

OBJECTIVE To evaluate the reliability and validity of the simplified Chinese version of the Quebec Back Pain Disability Scale (SC-QDS). STUDY DESIGN AND SETTING The QDS was translated and cross-culturally adapted into SC following international guidelines. The SC-QDS was completed by 114 patients with low back pain (LBP) and 65 healthy controls, along with the SC Oswestry Disability Index (SC-ODI) and visual analogue scale (VAS). Psychometric evaluation included homogeneity and reproducibility by internal consistency and test-retest reliability and construct validity by calculating the Pearsons correlation coefficients among QDS, SC-ODI, and VAS. Discriminative validity was determined by students t-test. RESULTS SC-QDS scores were well distributed, with no floor or ceiling effects. Internal consistency was excellent (Cronbach α 0.976). The items and overall SC-QDS were correlated (r=0.640-0.898 and P<0.0001). Intraclass correlation coefficient of test-retest reliability was excellent (0.987, 95% confidence interval: 0.978-0.992). Construct validity was confirmed by high correlation of SC-QDS and SC-ODI (r=0.901 and P<0.0001) and VAS (r=0.770 and P<0.0001) scores, as was discriminative validity by significantly different SC-QDS scores for patients with LBP and controls (46.3 ± 19.9 vs. 14.6 ± 8.5 and P<0.0001). CONCLUSIONS The SC-QDS has good internal consistency, test-retest reliability, and construct and discriminative validity. The SC-QDS is appropriate for clinical and research uses with Chinese-speaking patients with LBP in mainland China.

Using precisely controlled bidirectional orthopedic forces to assess flexibility in adolescent idiopathic scoliosis: comparisons between push-traction film, supine side bending, suspension, and fulcrum bending film.

Study Design. A prospective study. Objective. To validate the effectiveness of push-traction film (PTF) in assessment of curve flexibility in adolescent idiopathic scoliosis. Summary of Background Data. There is no agreement among surgeons about the most advantageous method in flexibility evaluation of scoliosis. As all methods available provide the orthopedic force from one direction and use a single torque, it is difficult for them to achieve the postoperative correction; also they could not meet the needs for different types of curves. Methods. Precisely controlled bidirectional (push and traction) orthopedic forces were applied for curve flexibility evaluation in 31 consecutive adolescent idiopathic scoliosis patients. The correction rate (CR) of postoperation, supine side-bending, suspension, and fulcrum bending radiographs were compared with PTF in instrumented main thoracic (MT) and thoracolumbar/lumbar curves. Correlation and linear regression analyses were also been done to find the best predictor among the four methods. Results. In MT group, CR of PTF was significantly higher than that of side bending (P = 0.010) and suspension (P = 0.000) but not significantly different from that of fulcrum bending (P = 0.335). In TL/L group, CR of PTF was significantly higher than that of suspension (P = 0.000), but not significantly different from that of side bending (P = 0.681) and fulcrum bending (P = 0.382). There was no significant difference between CR of PTF and postoperation in both MT (P = 0.122) and TL/L (P = 0.068) groups. Correlation and linear regression analyses showed that PTF provided the highest correlation of the four methods, with the postoperative angle in bothMT (r = 0.957) and MT/L group (r = 0.779). Conclusion. To our knowledge, this was the first report about using precisely controlled bidirectional correction forces for curve flexibility evaluation. Although it did not achieve the best CR among the four methods studied, correlation and regression analyses confirmed that PTF was a more stable and accurate method to predict flexibility. We believe that further exploration of a more rational push-traction force ratio would help to obtain a better flexibility.