Yuzuru Husimi

In vitro virus: Bonding of mRNA bearing puromycin at the 3′-terminal end to the C-terminal end of its encoded protein on the ribosome in vitro

Adequate means for genotype assignment to phenotype is essential in evolutionary molecular engineering. In this study, construction of ‘in vitro virus’ was carried out in which a genotype molecule (mRNA) covalently binds to the phenotype molecule (protein) through puromycin on the ribosome in a cell‐free translation system. Bonding efficiency was ∼10%, thus indicating a population of the in vitro virus to have ∼1012 protein variants, this number being 104 that in the phage display. The in vitro virus is useful for examining protein evolution in a test tube and the results may possibly serve as basis for a general method for selecting proteins possessing the most desirable functions.

Quantum dot FRET biosensors that respond to pH, to proteolytic or nucleolytic cleavage, to DNA synthesis, or to a multiplexing combination

Fluorescent acceptors have been immobilized on nanoparticulate quantum dots (QDs), which serve in turn as their FRET donors. The broad excitation and narrow emission bands of QDs mark them as having excellent potential as donors for FRET and, in principle, differently colored QDs could be excited simultaneously. The present work describes the preparation and operation of FRET-based QD bioprobes individually able to detect the actions of protease, deoxyribonuclease, DNA polymerase, or changes in pH. In addition, two such QD-mounted biosensors were excited at a single wavelength, and shown to operate simultaneously and independently of each other in the same sample solution, allowing multiplex detection of the action of a protease, trypsin, in the presence of deoxyribonuclease.

Fine Structure in the Thermal Denaturation of DNA: High Temperature-Resolution Spectrophotometric Studie

Fine structures which appear in the optical melting profile of DNA are examined from both the experimental and theoretical aspects. After a brief historical survey of the DNA melting experiments during the pre-fine-structure era in Section II, the high temperature-resolution experimental techniques which are essential to the investigation of fine structure are described in Section III. Then, the current status of the high-resolution study is reviewed first by a phenomenological description of the melting profile (Section IV) and then of the refolding profile (Section V), where a general idea about the cooperatively melting region and several factors affecting it is given. Sections VI and VII are devoted to the review of current theoretical works. Several well-established theoretical frameworks which correlate the base sequence with the melting phenomena are examined in terms of their rigorousness and usefulness. The molecular thermodynamic parameters concerning the DNA melting which have been evaluated by several research groups are compared and discussed. Finally, in Section VIII, current ideas on the correlation between the fine structure and genetic functions and genetic maps are reviewed. Some future problems relating to the fine structure are also discussed.

Experimental rugged fitness landscape in protein sequence space.

The fitness landscape in sequence space determines the process of biomolecular evolution. To plot the fitness landscape of protein function, we carried out in vitro molecular evolution beginning with a defective fd phage carrying a random polypeptide of 139 amino acids in place of the g3p minor coat protein D2 domain, which is essential for phage infection. After 20 cycles of random substitution at sites 12–130 of the initial random polypeptide and selection for infectivity, the selected phage showed a 1.7×104-fold increase in infectivity, defined as the number of infected cells per ml of phage suspension. Fitness was defined as the logarithm of infectivity, and we analyzed (1) the dependence of stationary fitness on library size, which increased gradually, and (2) the time course of changes in fitness in transitional phases, based on an original theory regarding the evolutionary dynamics in Kauffmans n-k fitness landscape model. In the landscape model, single mutations at single sites among n sites affect the contribution of k other sites to fitness. Based on the results of these analyses, k was estimated to be 18–24. According to the estimated parameters, the landscape was plotted as a smooth surface up to a relative fitness of 0.4 of the global peak, whereas the landscape had a highly rugged surface with many local peaks above this relative fitness value. Based on the landscapes of these two different surfaces, it appears possible for adaptive walks with only random substitutions to climb with relative ease up to the middle region of the fitness landscape from any primordial or random sequence, whereas an enormous range of sequence diversity is required to climb further up the rugged surface above the middle region.

cDNA display: a novel screening method for functional disulfide-rich peptides by solid-phase synthesis and stabilization of mRNA–protein fusions

We report a robust display technology for the screening of disulfide-rich peptides, based on cDNA–protein fusions, by developing a novel and versatile puromycin-linker DNA. This linker comprises four major portions: a ‘ligation site’ for T4 RNA ligase, a ‘biotin site’ for solid-phase handling, a ‘reverse transcription primer site’ for the efficient and rapid conversion from an unstable mRNA–protein fusion (mRNA display) to a stable mRNA/cDNA–protein fusion (cDNA display) whose cDNA is covalently linked to its encoded protein and a ‘restriction enzyme site’ for the release of a complex from the solid support. This enables not only stabilizing mRNA–protein fusions but also promoting both protein folding and disulfide shuffling reactions. We evaluated the performance of cDNA display in different model systems and demonstrated an enrichment efficiency of 20-fold per selection round. Selection of a 32-residue random library against interleukin-6 receptor generated novel peptides containing multiple disulfide bonds with a unique linkage for its function. The peptides were found to bind with the target in the low nanomolar range. These results show the suitability of our method for in vitro selections of disulfide-rich proteins and other potential applications.

An in vitro DNA virus for in vitro protein evolution

In vitro virus is a molecular construct for in vitro protein evolution, which requires some mechanism to link phenotype to genotype. The first in vitro virus was realized by bonding a nascent protein with its coding mRNA via puromycin in in vitro translation. We report a new construct of in vitro DNA virus. The virion was a covalent cDNA–protein fusion, and virion formation did not require any modification of mRNA. Due to intactness of mRNA, this type of in vitro DNA virus will take the next step toward in vitro autonomous evolution, just like in vivo viral evolution in a cellstat.

Cellstat—A continuous culture system of a bacteriophage for the study of the mutation rate and the selection process at the DNA level

A bacteriophage is continuously cultured in the flow of the host bacterial cell under the control of a minicomputer. In the culture, the population of the noninfected cell is kept constant by the endogeneous regulation mechanism, so it is called the ’’cellstat’’ culture. Due to the high dilution rate of the host cell, the mutant cell cannot be selected in the cellstat. Therefore, the cellstat is suitable for the study of the mutation rate and the selection process of a bacteriophage under well‐defined environmental conditions (including physiological condition of the host cell) without being interfered by host‐cell mutations. Applications to coliphage fd, a secretion type phage, are shown as a measurement example. A chimera between fd and a plasmid pBR322 is cultured more than 100 h. The process of population changeovers by deletion mutants indicates that the deletion hot spots exist in this cloning vector and that this apparatus can be used also for testing instability of a recombinant DNA.

Solid-phase translation and RNA-protein fusion: a novel approach for folding quality control and direct immobilization of proteins using anchored mRNA.

A novel cell-free translation system is described in which template-mRNA molecules were captured onto solid surfaces to simultaneously synthesize and immobilize proteins in a more native-state form. This technology comprises a novel solid-phase approach to cell-free translation and RNA–protein fusion techniques. A newly constructed biotinylated linker-DNA which enables puromycin-assisted RNA–protein fusion is ligated to the 3′ ends of the mRNA molecules to attach the mRNA-template on a streptavidin-coated surface and further to enable the subsequent reactions of translation and RNA–protein fusion on surface. The protein products are therefore directly immobilized onto solid surfaces and furthermore were discovered to adopt a more native state with proper protein folding and superior biological activity compared with conventional liquid-phase approaches. We further validate this approach via the production of immobilized green fluorescent protein (GFP) on microbeads and by the production and assay of aldehyde reductase (ALR) enzyme with 4-fold or more activity. The approach developed in this study may enable to embrace the concept of the transformation of ‘RNA chip-to-protein chip’ using a solid-phase cell-free translation system and thus to the development of high-throughput microarray platform in the field of functional genomics and in vitro evolution.

Development of Systemic in vitro Evolution and Its Application to Generation of Peptide-Aptamer-Based Inhibitors of Cathepsin E

Proteases are involved in various biological functions. Thus, inhibition of their activities is scientifically interesting and medically important. However, there is no systematic method established to date to generate endopeptidase inhibitory peptides. Here, we report a general system to identify endopeptidase inhibitory peptides based on the use of in vitro evolution. Using this system, we generated peptides that inhibit cathepsin E (CE) specifically at a submicromolar IC(50). This system generates protease inhibitor peptides utilizing techniques of cDNA display, selection-by-function, Y-ligation-based block shuffling, and others. We further demonstrated the importance and effectiveness of a secondary library for obtaining small-sized and active peptides. CE inhibitory peptides generated by this method were characterized by a small size (8 to 12 aa) and quite different sequences, suggesting that they bind to different sites on CE. Typical CE inhibitory peptide aptamers obtained here (P(i)101; SCGG IIII SCIA) have half an inhibition activity (K(i); 5 nM) of pepstatin A (potent CE inhibitor) without inhibiting cathepsin D (structurally similar to CE). The general applicability of this system suggests that it may be useful to identify inhibitory peptides for various kinds of proteases and that it may therefore contribute to protein science and drug discovery. The peptide binding to a protein is discussed in comparison with the antibody binding to an antigen.

An Efficient Ligation Method in the Making of an in vitro Virus for in vitro Protein Evolution.

The “in vitro virus” is a molecular construct to perform evolutionary protein engineering. The “virion(=viral particle)”(mRNA-peptide fusion), is made by bonding a nascent protein with its coding mRNA via puromycin in a test tube for in vitro translation. In this work, the puromycin-linker was attached to mRNA using the Y-ligation, which was a method of two single-strands ligation at the end of a double-stranded stem to make a stem-loop structure. This reaction gave a yield of about 95%. We compared the Y-ligation with two other ligation reactions and showed that the Y-ligation gave the best productivity. An efficient amplification of the in vitro virus with this “viral genome” was demonstrated.