Yves Guichard

Cytotoxicity and genotoxicity of nanosized and microsized titanium dioxide and iron oxide particles in Syrian hamster embryo cells.

Potential differences in the toxicological properties of nanosized and non-nanosized particles have been notably pointed out for titanium dioxide (TiO(2)) particles, which are currently widely produced and used in many industrial areas. Nanoparticles of the iron oxides magnetite (Fe(3)O(4)) and hematite (Fe(2)O(3)) also have many industrial applications but their toxicological properties are less documented than those of TiO(2). In the present study, the in vitro cytotoxicity and genotoxicity of commercially available nanosized and microsized anatase TiO(2), rutile TiO(2), Fe(3)O(4), and Fe(2)O(3) particles were compared in Syrian hamster embryo (SHE) cells. Samples were characterized for chemical composition, primary particle size, crystal phase, shape, and specific surface area. In acellular assays, TiO(2) and iron oxide particles were able to generate reactive oxygen species (ROS). At the same mass dose, all nanoparticles produced higher levels of ROS than their microsized counterparts. Measurement of particle size in the SHE culture medium showed that primary nanoparticles and microparticles are present in the form of micrometric agglomerates of highly poly-dispersed size. Uptake of primary particles and agglomerates by SHE exposed for 24 h was observed for all samples. TiO(2) samples were found to be more cytotoxic than iron oxide samples. Concerning primary size effects, anatase TiO(2), rutile TiO(2), and Fe(2)O(3) nanoparticles induced higher cytotoxicity than their microsized counterparts after 72 h of exposure. Over this treatment time, anatase TiO(2) and Fe(2)O(3) nanoparticles also produced more intracellular ROS compared to the microsized particles. However, similar levels of DNA damage were observed in the comet assay after 24 h of exposure to anatase nanoparticles and microparticles. Rutile microparticles were found to induce more DNA damage than the nanosized particles. However, no significant increase in DNA damage was detected from nanosized and microsized iron oxides. None of the samples tested showed significant induction of micronuclei formation after 24 h of exposure. In agreement with previous size-comparison studies, we suggest that in vitro cytotoxicity and genotoxicity induced by metal oxide nanoparticles are not always higher than those induced by their bulk counterparts.

Iron oxide particles modulate the ovalbumin-induced Th2 immune response in mice

This study was designed to investigate the modulatory effects of submicron and nanosized iron oxide (Fe(2)O(3)) particles on the ovalbumin (OVA)-induced immune Th2 response in BALB/c mice. Particles were intratracheally administered four times to mice before and during the OVA sensitization period. For each particle type, three different doses, namely 4×100, 4×250 or 4×500 μg/mouse, were used and for each dose, four groups of mice, i.e. group saline solution (1), OVA (2), particles (3), and OVA plus particles (4), were constituted. Mice exposed to OVA alone exhibited an allergic Th2-dominated response with a consistent increase in inflammatory scores, eosinophil numbers, specific IgE levels and IL-4 production. When the mice were exposed to OVA and to high and intermediate doses of iron oxide submicron- or nanoparticles, the OVA-induced allergic response was significantly inhibited, as evidenced by the decrease in eosinophil cell influx and specific IgE levels. However, the low dose (4×100 μg) of submicron particles had no significant effect on the OVA allergic response while the same dose of nanoparticles had an adjuvant effect on the Th2 response to OVA. In conclusion, these data demonstrate that the pulmonary immune response to OVA is a sensitive target for intratracheally instilled particles. Depending on the particle dose and size, the allergic response was suppressed or enhanced.

Genotoxicity of synthetic amorphous silica nanoparticles in rats following short-term exposure. Part 2: intratracheal instillation and intravenous injection.

Synthetic amorphous silica nanomaterials (SAS) are extensively used in food and tire industries. In many industrial processes, SAS may become aerosolized and lead to occupational exposure of workers through inhalation in particular. However, little is known about the in vivo genotoxicity of these particulate materials. To gain insight into the toxicological properties of four SAS (NM‐200, NM‐201, NM‐202, and NM‐203), rats are treated with three consecutive intratracheal instillations of 3, 6, or 12 mg/kg of SAS at 48, 24, and 3 hrs prior to tissue collection (cumulative doses of 9, 18, and 36 mg/kg). Deoxyribonucleic acid (DNA) damage was assessed using erythrocyte micronucleus test and the standard and Fpg‐modified comet assays on cells from bronchoalveolar lavage fluid (BALF), lung, blood, spleen, liver, bone marrow, and kidney. Although all of the SAS caused increased dose‐dependent changes in lung inflammation as demonstrated by BALF neutrophilia, they did not induce any significant DNA damage. As the amount of SAS reaching the blood stream and subsequently the internal organs is probably to be low following intratracheal instillation, an additional experiment was performed with NM‐203. Rats received three consecutive intravenous injections of 5, 10, or 20 mg/kg of SAS at 48, 24, and 3 hrs prior to tissue collection. Despite the hepatotoxicity, thrombocytopenia, and even animal death induced by this nanomaterial, no significant increase in DNA damage or micronucleus frequency was observed in SAS‐exposed animals. It was concluded that under experimental conditions, SAS induced obvious toxic effects but did cause any genotoxicity following intratracheal instillation and intravenous injection. Environ. Mol. Mutagen. 56:228–244, 2015.

Cytotoxic and genotoxic evaluation of different synthetic amorphous silica nanomaterials in the V79 cell line

The nature of occupational risks and hazards in industries that produce or use synthetic amorphous silica (SAS) nanoparticles is still under discussion. Manufactured SAS occur in amorphous form and can be divided into two main types according to the production process, namely, pyrogenic silica (powder) and precipitated silica (powder, gel or colloid). The physical and chemical properties of SAS may vary in terms of particle size, surface area, agglomeration state or purity, and differences in their toxicity potential might therefore be expected. The aim of this study was to compare the cytotoxicity and genotoxicity of representative manufactured SAS samples in Chinese hamster lung fibroblasts (V79 cells). Five samples from industrial SAS producers were evaluated, that is, two pyrogenic SAS powders (with primary particle sizes of 20 nm and 25/70 nm), one precipitated SAS powder (20 nm) and two precipitated SAS colloids (15 and 40/80 nm). V79 cell cultures were treated with different concentrations of SAS pre-dispersed in bovine serum albumin –water medium. Pyr (pyrogenic) 20, Pre (precipitated) 20 and Col (colloid) 15 significantly decreased the cell viability after 24 h of exposure, whilst Pyr 25/70 and Col 40/80 had negligible effects. The cytotoxicity of Pyr 20, Pre 20 and Col 15 was revealed by the induction of apoptosis, and Pyr 20 and Col 15 also produced DNA damage. However, none of the SAS samples generated intracellular reactive oxidative species, micronuclei or genomic mutations in V79 cells after 24 h of exposure. Overall, the results of this study show that pyrogenic, precipitated and colloidal manufactured SAS of around 20 nm primary particle size can produce significant cytotoxic and genotoxic effects in V79 cells. In contrast, the coarser-grained pyrogenic and colloid SAS (approximately 50 nm) yielded negligible toxicity, despite having been manufactured by same processes as their finer-grained equivalents. To explain these differences, the influence of particle agglomeration and oxidative species formation is discussed.

Cytotoxicity and genotoxicity of panel of single- and multiwalled carbon nanotubes: in vitro effects on normal Syrian hamster embryo and immortalized v79 hamster lung cells.

Carbon nanotubes (CNTs) belong to a specific class of nanomaterials with unique properties. Because of their anticipated use in a wide range of industrial applications, their toxicity is of increasing concern. In order to determine whether specific physicochemical characteristics of CNTs are responsible for their toxicological effects, we investigated the cytotoxic and genotoxic effects of eight CNTs representative of each of the commonly encountered classes: single- SW-, double- DW-, and multiwalled (MW) CNTs, purified and raw. In addition, because most previous studies of CNT toxicity were conducted on immortalized cell lines, we decided to compare results obtained from V79 cells, an established cell line, with results from SHE (Syrian hamster embryo) cells, an easy-to-handle normal cell model. After 24 hours of treatment, MWCNTs were generally found to be more cytotoxic than SW- or DWCNTs. MWCNTs also provoked more genotoxic effects. No correlation could be found between CNT genotoxicity and metal impurities, length, surface area, or induction of cellular oxidative stress, but genotoxicity was seen to increase with CNT width. The toxicity observed for some CNTs leads us to suggest that they might also act by interfering with the cell cycle, but no significant differences were observed between normal and immortalized cells.

In Vitro Cytotoxicity and Transforming Potential of Industrial Carbon Dust (Fibers and Particles) in Syrian Hamster Embryo (SHE) Cells

Carbon fibers have many applications, mainly in high-tech industries such as the aviation industry. Eleven carbon samples (fibers and particles) coming from an aeronautic group were tested for their cytotoxicity and carcinogenic potential using in vitro short-term assays in Syrian hamster embryo cells. These samples were taken during each important step of the process, i.e. from the initial heating of polyacrylonitrile fibers to pure carbon fibers. They were compared to an asbestos fiber, an amorphous silica, and two commercial graphite powders. Their physical-chemical characteristics and their capacity to release reactive oxygen species (ROS) were determined. This study showed that none of the carbon samples was able to generate ROS as measured by Electron Paramagnetic Resonance analysis, and in our biological assays, they demonstrated no morphological transformation potential and low cytotoxicity compared to positive control (chrysotile asbestos).

Genotoxicity of styrene-7,8-oxide and styrene in Fisher 344 rats: A 4-week inhalation study

The cytogenetic alterations in leukocytes and the increased risk for leukemia, lymphoma, or all lymphohematopoietic cancer observed in workers occupationally exposed to styrene have been associated with its hepatic metabolisation into styrene-7,8-oxide, an epoxide which can induce DNA damages. However, it has been observed that styrene-7,8-oxide was also found in the atmosphere of reinforced plastic industries where large amounts of styrene are used. Since the main route of exposure to these compounds is inhalation, in order to gain new insights regarding their systemic genotoxicity, Fisher 344 male rats were exposed in full-body inhalation chambers, 6 h/day, 5 days/week for 4 weeks to styrene-7,8-oxide (25, 50, and 75 ppm) or styrene (75, 300, and 1000 ppm). Then, the induction of micronuclei in circulating reticulocytes and DNA strand breaks in leukocytes using the comet assay was studied at the end of the 3rd and 20th days of exposure. Our results showed that neither styrene nor styrene-7,8-oxide induced a significant increase of the micronucleus frequency in reticulocytes or DNA strand breaks in white blood cells. However, in the presence of the formamidopyridine DNA glycosylase, an enzyme able to recognize and excise DNA at the level of some oxidized DNA bases, a significant increase of DNA damages was observed at the end of the 3rd day of treatment in leukocytes from rats exposed to styrene but not to styrene-7,8-oxide. This experimental design helped to gather new information regarding the systemic genotoxicity of these two chemicals and may be valuable for the risk assessment associated with an occupational exposure to these molecules.

In Vitro Study of Mutagenesis Induced by Crocidolite-Exposed Alveolar Macrophages NR8383 in Cocultured Big Blue Rat2 Embryonic Fibroblasts

Asbestos-induced mutagenicity in the lung may involve reactive oxygen/nitrogen species (ROS/RNS) released by alveolar macrophages. With the aim of proposing an alternative in vitro mutagenesis test, a coculture system of rat alveolar macrophages (NR8383) and transgenic Big Blue Rat2 embryonic fibroblasts was developed and tested with a crocidolite sample. Crocidolite exposure induced no detectable increase in ROS production from NR8383, contrasting with the oxidative burst that occurred following a brief exposure (1 hour) to zymosan, a known macrophage activator. In separated cocultures, crocidolite and zymosan induced different changes in the gene expressions involved in cellular inflammation in NR8383 and Big Blue. In particular, both particles induced up-regulation of iNOS expression in Big Blue, suggesting the formation of potentially genotoxic nitrogen species. However, crocidolite exposure in separated or mixed cocultures induced no mutagenic effects whereas an increase in Big Blue mutants was detected after exposure to zymosan in mixed cocultures. NR8383 activation by crocidolite is probably insufficient to induce in vitro mutagenic events. The mutagenesis assay based on the coculture of NR8383 and Big Blue cannot be used as an alternative in vitro method to assess the mutagenic properties of asbestos fibres.

In vitro cell transformation induced by synthetic amorphous silica nanoparticles

Synthetic amorphous silica nanoparticles (SAS) are among the most widely produced and used nanomaterials, but little is known about their carcinogenic potential. This study aims to evaluate the ability of four different SAS, two precipitated, NM-200 and NM-201, and two pyrogenic, NM-202 and NM-203, to induce the transformation process. For this, we used the recently developed in vitro Bhas 42 cell transformation assay (CTA). The genome of the transgenic Bhas 42 cells contains several copies of the v-Ha-ras gene, making them particularly sensitive to tumor-promoter agents. The Bhas 42 CTA, which includes an initiation assay and a promotion assay, was validated in our laboratory using known soluble carcinogenic substances. Its suitability for particle-type substances was verified by using quartz Min-U-Sil 5 (Min-U-Sil) and diatomaceous earth (DE) microparticles. As expected given their known transforming properties, Min-U-Sil responded positively in the Bhas 42 CTA and DE responded negatively. Transformation assays were performed with SAS at concentrations ranging from 2μg/cm2 to 80μg/cm2. Results showed that all SAS have the capacity to induce transformed foci, interestingly only in the promotion assay, suggesting a mode of action similar to tumor-promoter substances. NM-203 exhibited transforming activity at a lower concentration than the other SAS. In conclusion, this study showed for the first time the transforming potential of different SAS, which act as tumor-promoter substances in the Bhas 42 model of cell transformation.