Zengxiang Zhang
Chinese Academy of Sciences
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Zengxiang Zhang.
Remote Sensing | 2016
Zengxiang Zhang; Na Li; Xiao Wang; Fang Liu; Linping Yang
Although the mapping of spatiotemporal patterns of urban expansion has been widely studied, relatively little attention has been paid to detailed comparative studies on spatiotemporal patterns of urban growth at the regional level over a relatively longer timeframe. This paper was based on multi-sensor remote sensing image data and employs several landscape metrics and the centroid shift model to conduct a multi-angle quantitative analysis on urban expansion in Beijing, Tianjin and Tangshan (Jing-Jin-Tang) in the period from 1970–2013. In addition, the impact analysis of urban growth on land use was adopted in this research. The results showed that Beijing, Tianjin and Tangshan all experienced rapid urbanization, with an average annual urban growth rate of 7.28%, 3.9%, and 0.97%, respectively. Beijing has especially presented a single choropleth map pattern, whereas Tianjin and Tangshan have presented a double surface network pattern in orientation analysis. Furthermore, urban expansion in Beijing was mainly concentrated in Ring 4 to Ring 6 in the northwest and southeast directions, whereas the major expansion was observed in the southeast in Tianjin, primarily affected by dramatic development of Binhai New Area and Tianjin South Railway Station. Naturally, the urban expansion in Tangshan was significantly influenced by the expansion of Beijing and was primarily southwestward. The hot-zones of urbanization were observed within the ranges of 7–25 km, 6–18 km, and 0–15 km, accounting for 93.49%, 89.44% and 72.44% of the total expansion area in Beijing, Tianjin and Tangshan, respectively. The majority of the newly developed urban land was converted from cultivated land and integrated from other built-up land over the past four decades. Of all new urban land in the Beijing, Tianjin and Tangshan, more than 50% was converted from cultivated land, and there was a general tendency for smaller cities to have higher percentages of converted land, accounting for 50.84%, 51.19%, and 51.58%, respectively. The study revealed significant details of the temporal and spatial distributions of urban expansion in Beijing, Tianjin and Tangshan and provided scientific support for the collaborative development of the Beijing, Tianjin and Hebei (Jing-Jin-Ji) regions.
Journal of Geographical Sciences | 2016
Fang Liu; Zengxiang Zhang; Lifeng Shi; Xiaoli Zhao; Jinyong Xu; Ling Yi; Bin Liu; Qingke Wen; Shunguang Hu; Xiao Wang; Lijun Zuo; Na Li; Minmin Li
The urban expansion process in China from the 1970s to 2013 was retrieved based on remote sensing and GIS technology. With the latest zoning method used as reference, annual expansion area per city, urban expansion type, and fractal dimension index were employed to analyze the Chinese urban expansion characteristics and its spatial difference from the aspects of urban expansion process, influence of urban expansion on land use, and urban spatial morphological evolutions. Results indicate that 1) under the powerful guidance of policies, urban expansion in China went through six different stages, and cities in the eastern region entered the rapid expansion period the earliest, followed by cities in the central, northeastern and western regions; 2) cultivated lands and rural settlements and industrial traffic lands were the important land sources for urban expansion in China; the influence of urban expansion on land use in the eastern region was the strongest, followed by the central, northeastern and western regions; 3) urban spatial morphology tended to be complex and was directly related to the adopted spatial expansion mode. Infilling expansion became the main urban expansion mode in the western region first, then in the central and northeastern regions, and finally in the eastern region. This study establishes the foundation for an in-depth recognition of urban expansion in China and optimization of future urban planning.
Remote Sensing | 2016
Fang Liu; Zengxiang Zhang; Xiao Wang
Urban expansion form is the most direct manifestation of urban expansion in space. Although it has been widely and vigorously studied, relatively little attention has been paid to reveal its spatiotemporal characteristics at the administrative level over a long timeframe. In this study, 31 Chinese municipalities and provincial capitals were selected as subjects to identify the urban expansion forms of provincial and higher level cities in China. First, urban expansion processes of these cities in the past four decades were reconstructed using remote sensing and geographical information system (GIS) technology. Then, the overall characteristics of urban expansion were presented to scientifically determine the urban expansion forms of the provincial and higher level cities in China. Afterwards, the annual expansion area per city (AEAC) index was employed to describe the urban expansion processes and determine the important time nodes of the 31 cities. Lastly, the urban expansion type (UET) index was adopted to analyze the spatiotemporal characteristics of urban expansion forms. Results indicate that (1) from the 1970s to 2013, urban lands in provincial and higher level cities in China expanded dramatically, with the central built-up area increasing by over 5 times, and urban expansion demonstrating an apparent spatial difference. The expansion rate of cities in East China was fastest with an AEAC of 13.78 km2, followed by that in Central China (AEAC = 9.67 km2). The urban expansion rate was slowest in West China (AEAC = 7.11 km2); (2) Affected by the national macro policies, urban expansion processes successively experienced four different stages: a slow expansion period (1970s–1987), an accelerating expansion period (1987–1995), a slowdown expansion period (1995–2000), and a high-speed fluctuating expansion period (after 2000); (3) The urban expansion forms of municipalities and provincial capitals were mainly edge-expansion supported by infilling expansion. The leapfrog form contributed minimally to urban expansion; (4) The edge-expansion form surged before 2010 and gradually slowed down after 2010. By contrast, infilling expansion kept increasing in the past four decades. Lastly, the rate of urban expansion via the leapfrog form fluctuated from the 1970s to 2013.
Chinese Geographical Science | 2015
Lifeng Shi; Fang Liu; Zengxiang Zhang; Xiaoli Zhao; Bin Liu; Jinyong Xu; Qingke Wen; Ling Yi; Shunguang Hu
As the ‘economic engines’ of China, coastal cities have developed and expanded considerably since the 1970s. In this study, information on the urban expansion process of Chinese coastal cities from the 1970s to 2013 was retrieved. Through the analysis of stage characteristics, spatial expansion modes, influences on land use, centroid shifts, and spatial morphological evolutions, the spatial differences of coastal urban expansion were revealed. Results indicate that 1) the expansion stages of southern coastal cities are more complex than those of northern coastal cities, and the expansion ranges and speeds of the former are far higher than those of the latter; 2) the spatial expansion of southern coastal cities mostly adopt a single mode, whereas northern coastal cities mostly adopt a mixed mode; 3) significant spatial differences in the occupations of different land sources exist between the south and the north along the coastline; 4) the centroid of coastal cities tends to migrate toward the coastline, and the centroid shift distances of southern coastal cities are clearly higher than those of northern coastal cities; and 5) the spatial morphology of southern coastal cities tends to be compact, whereas that of northern coastal cities tends to be loose. Policies have a powerful significance in terms of guiding urban expansion and its spatial differences in coastal cities. Urban expansion in coastal cities will encounter new opportunities and challenges under the guidance of new types of urbanization strategies.
IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing | 2010
Qingke Wen; Zengxiang Zhang; Shuo Liu; Xiao Wang; Chen Wang
Tibet is one of the five largest pasturing regions of China. Grassland classification is significant for its utilization and protection, but few correlative studies have been done in Tibet due to its rugged natural conditions, which make it difficult and time-consuming to conduct extensive field measurements. The remote-sensing technique is helpful for grassland classification in such regions. In this study, high temporal resolution of a moderate resolution imaging spectroradiometer (MODIS) is used to construct temporal profiles of enhanced vegetation index (EVI) during the grass growth period in Tibet. By dividing the large study area into individual regions based on altitude and latitude, we classified the grasslands of Tibet into six types-meadow steppe, typical steppe, desert steppe, alpine meadow steppe, alpine typical steppe, and shrub herbosa. Based on the 1:500 000 scale maps of Chinas grassland resources, the validation process indicates an overall accuracy of 68.02 %, and a Kappa coefficient of 0.52. Land managers are provided with maps and area values of each grassland type in Tibet in 2005. In addition, regional average EVI reflect the relative biomass of each types of the grassland, which will provide evidences for coordinating plans for grassland developing. MODIS_EVI provides a simple and rapid method to classify the grassland in regions that are hard to reach, which offers an effective means of investigating biological resources on a large scale.
Remote Sensing | 2015
Tian Zeng; Zengxiang Zhang; Xiaoli Zhao; Xiao Wang; Lijun Zuo
Although the MODIS Collection 5.1 Land Cover Type (MODIS v5.1 LCT) product is one of the most recent global land cover datasets and has the shortest updating cycle, evaluations regarding this collection have not been reported. Given the importance of evaluating global land cover data for producers and potential users, the 2010 MODIS v5.1 LCT product IGBP (International Geosphere-Biosphere Programme) layer was evaluated based on two grid maps at scales of 100-m and 500-m,which were derived by rasterizing the 2010 data from the national land use/cover database of China (NLUD-C). This comparison was conducted based on a new legend consisting of nine classes constructed based on the definitions of classes in the IGBP and NLUD-C legends. The overall accuracies of the aggregated classification data were 64.62% and 66.42% at the sub-pixel and pixel scales, respectively. These accuracies differed significantly in different regions. Specifically, high-quality data were obtained more easily for regions with a single land cover type, such as Xinjiang province and the northeast plain of China. The lowest accuracies were obtained for the middle of China, including Ningxia, Shaanxi, Chongqing, Yunnan and Guizhou. At the sub-pixel scale, relatively high producer and user accuracies were obtained for cropland, grass and barren regions; the highest producer accuracy was obtained for forests, and the highest user accuracy was obtained for water bodies. Shrublands and wetlands were associated with low producer and user accuracies at the sub-pixel and pixel scales, of less than 10%. Based on dominant-type reference data, the errors were classified as mixed-pixel errors and labeling errors. Labeling errors primarily originated from misclassification between grassland and barren lands. Mixed pixel errors increased as the pixel diversity increased and as the percentage of dominant-type sub-pixels decreased. Overall, mixed pixels were sources of error for most land cover types other than grassland and barren lands; whereas labeling errors were more prevalent than mixed pixel errors when considering all of the land cover data over China, due to the large amount of misclassification between the pure pixels of grassland and barren lands. Next, the accuracy of cropland/natural vegetation mosaics was assessed based on the qualitative (a mosaic of croplands, forests, shrublands, and grasslands) and quantitative (no single component composes more than 60% of the landscape) parts in the definition, which resulted in accuracies of 91.43% and less than 19.26%, respectively. These results are summarized with their implications for the development of the next generation of MCD12Q1 data and with suggestions for potential users of MCD12Q1 v5.1.
International Journal of Geographical Information Science | 2016
Hongrun Ju; Zengxiang Zhang; Lijun Zuo; Jinfeng Wang; Shengrui Zhang; Xiao Wang; Xiaoli Zhao
ABSTRACT Scientific interpretation of the driving forces of built-up land expansion is essential to urban planning and policy-making. In general, built-up land expansion results from the interactions of different factors, and thus, understanding the combined impacts of built-up land expansion is beneficial. However, previous studies have primarily been concerned with the separate effect of each driver, rather than the interactions between the drivers. Using the built-up land expansion in Beijing from 2000 to 2010 as a study case, this research aims to fill this gap. A spatial statistical method, named the geographical detector, was used to investigate the effects of physical and socioeconomic factors. The effects of policy factors were also explored using physical and socioeconomic factors as proxies. The results showed that the modifiable areal unit problem existed in the geographical detector, and 4000 m might be the optimal scale for the classification performed in this study. At this scale, the interactions between most factors enhanced each other, which indicated that the interactions had greater effects on the built-up land expansion than any single factor. In addition, two pairs of nonlinear enhancement, the greatest enhancement type, were found between the distance to rivers and two socioeconomic factors: the total investment in fixed assets and GDP. Moreover, it was found that the urban plans, environmental protection policies and major events had a great impact on built-up land expansion. The findings of this study verify that the geographical detector is applicable in analysing the driving forces of built-up land expansion. This study also offers a new perspective in researching the interactions between different drivers.
Chinese Geographical Science | 2016
Qingke Wen; Zengxiang Zhang; Lifeng Shi; Xiaoli Zhao; Fang Liu; Jinyong Xu; Ling Yi; Bin Liu; Xiao Wang; Lijun Zuo; Shunguang Hu; Na Li; Minmin Li
If urban sprawl is to be avoided in China in the next ten years, it is not only crucial to understand the overall history, current status, and future trends of urban expansion there, but also these differences, and this is presently lacking. In this study, remotely sensed images with approximately 30 m spatial resolution were used to quantitatively assess the spatial and temporal patterns of urban expansion of 60 Chinese cities (1973–2013). Urban-expansion-process curves of the cities studied were drawn using annual expansion area as an indicator. Curve similarity analysis generated four basic process modes of urban expansion in China. These included cities that: 1) peaked around 2004 and then decelerated; 2) peaked around 2010 and then decelerated; 3) showed sustained acceleration, and 4) showed continued deceleration. Four basic process modes represented cities under different levels of development stage. Geographic location was found to be the most related characteristic to urban expansion process. Regional development policies at the national level in each region also showed highly temporal consistency with fluctuation characteristics of urban expansion process. Urban characteristic such as population size and administrative level were not found to be significantly related to urban expansion-process modes. Understanding the basic process-mode categories well is extremely important for future regional-balance planning and development of macroeconomic policies.
Journal of Geographical Sciences | 2014
Jinyong Xu; Zengxiang Zhang; Xiaoli Zhao; Qingke Wen; Lijun Zuo; Xiao Wang; Ling Yi
This study examined the spatial distribution of the continent coastline in northern China using remote sensing and GIS techniques, and calculated the fractal dimension of the coastline by box-counting method, with a time span from 2000 to 2012. Moreover, we analyzed the characteristics of spatial-temporal changes in the coastline’s length and fractal dimension, the relationship between the length change and fractal dimension change, and the driving forces of coastline changes in northern China. During the research period, the coastline of the study area increased by 637.95 km, at a rate of 53.16 km per year. On the regional level, the most significant change in coastline length was observed in Tianjin and Hebei. Temporally, the northern China coastline grew faster after 2008. The most dramatic growth was found between 2010 and 2011, with an increasing rate of 2.49% per year. The fractal dimension of the coastline in northern China was increasing during the research period, and the most dramatic increase occurred in Bohai Rim. There is a strong-positive linear relationship between the historical coastline length and fractal dimension (the correlation coefficient was 0.9962). Through statistical analysis of a large number of local coastline changes, it can be found that the increase (or decrease) of local coastline length will, in most cases, lead to the increase (or decrease) of the whole coastline fractal dimension. Civil-coastal engineering construction was the most important factor driving the coastline change in northern China. Port construction, fisheries facilities and salt factories were the top three construction activities. Compared to human activities, the influence of natural processes such as estuarine deposit and erosion were relatively small.
Science China-earth Sciences | 2016
Zengxiang Zhang; Qingke Wen; Fang Liu; Xiaoli Zhao; Bin Liu; Jinyong Xu; Ling Yi; Shunguang Hu; Xiao Wang; Lijun Zuo; Na Li; Minmin Li; Lifeng Shi; Tian Zeng; Hongrun Ju
Urbanization in China has expanded at an unprecedented speed since the declaration of “Reform and Open Policy” and presented many challenges. Unbalanced regional development, appearance of super megacities and concomitant problems, and conflicts between urbanization and cultivated land protection are three critical problems that Chinese urbanization has to face. To develop new plans for foreseeable future urbanization in China, it is critical to understand the evolving history of cities across China. This study maps urban expansion of 60 typical Chinese cities based on large amount of remote sensing data and the labor-intensive image interpretation method, in order to understand the history of urban expansion from the 1970s to 2013. Results showed that area of cities expanded 5.23 times compared to their area in the 1970s. Urban expansion in China accelerated three times (1988–1996, 1999–2006, and 2009–2011) and decelerated three times (1997–1998, 2007–2008, and 2012–2013) over the 40 years. The urban area of South China expanded most significantly 9.42 times, while the urban area in Northeast China expanded only 2.37 times. The disparity among different administrative ranks of cities was even greater than (3.81 times) the differences among different regions. Super megacities have been continuously expanding at a fast rate (8.60-fold), and have not shown obvious signs of slowing down. The proportion of cultivated land among the land sources for urban expansion decreased to a small extent in the 1990s, but cultivated land continues to be the major land source for urban expansion. Effective future urbanization needs controlling the expansion scale of large cities and reasonably developing medium and small cities, as well as balancing regional development.