Zewen Wei

A Laminar Flow Electroporation System for Efficient DNA and siRNA Delivery

By introducing a hydrodynamic mechanism into a microfluidics-based electroporation system, we developed a novel laminar flow electroporation system with high performance. The laminar buffer flow implemented in the system separated the cell suspension flow from the electrodes, thereby excluding many unfavorable effects due to electrode reaction during electroporation, such as hydrolysis, bubble formation, pH change, and heating. Compared to conventional microfluidic electroporation systems, these improvements significantly enhanced transfection efficiency and cell viability. Furthermore, successful electrotransfection of plasmid DNA and, more importantly, synthetic siRNA, was demonstrated in several hard-to-transfect cell types using this system.

Microarray Based Screening of Peptide Nano Probes for HER2 Positive Tumor

Peptides are excellent biointerface molecules and diagnostic probes with many advantages such as good penetration, short turnover time, and low cost. We report here an efficient peptide screening strategy based on in situ single bead sequencing on a microarray. Two novel peptides YLFFVFER (H6) and KLRLEWNR (H10) specifically binding to the tumor biomarker human epidermal growth factor receptor 2 (HER2) with aKD of 10(-8) M were obtained from a 10(5) library. Conjugated to nanoparticles, both the H6 and H10 probes showed specific accumulation in HER2-positive tumor tissues in xenografted mice by in vivo imaging.

Bimodal Imprint Chips for Peptide Screening: Integration of High-Throughput Sequencing by MS and Affinity Analyses by Surface Plasmon Resonance Imaging

Peptide probes and drugs have widespread applications in disease diagnostics and therapy. The demand for peptides ligands with high affinity and high specificity toward various targets has surged in the biomedical field in recent years. The traditional peptide screening procedure involves selection, sequencing, and characterization steps, and each step is manual and tedious. Herein, we developed a bimodal imprint microarray system to embrace the whole peptide screening process. Silver-sputtered silicon chip fabricated with microwell array can trap and pattern the candidate peptide beads in a one-well-one-bead manner. Peptides on beads were photocleaved in situ. A portion of the peptide in each well was transferred to a gold-coated chip to print the peptide array for high-throughput affinity analyses by surface plasmon resonance imaging (SPRi), and the peptide left in the silver-sputtered chip was ready for in situ single bead sequencing by matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS). Using the bimodal imprint chip system, affinity peptides toward AHA were efficiently screened out from the 7 × 10(4) peptide library. The method provides a solution for high efficiency peptide screening.

Rapid Screening of Peptide Probes through In Situ Single-Bead Sequencing Microarray

Peptide ligands as targeting probes for in vivo imaging and drug delivery have attracted great interest in the biomedical community. However, high affinity and specificity screening of large peptide libraries remains a tedious process. Here, we report a continuous-flow microfluidic method for one-bead-one-compound (OBOC) combinatorial peptide library screening. We screened a library with 2 × 10(5) peptide beads within 4 h and discovered 140 noncanonical peptide hits targeting the tumor marker, aminopeptidase N (APN). Using the Clustal algorithm, we identified the conserved sequence Tyr-XX-Tyr in the N terminal. We demonstrated that the novel sequence YVEYHLC peptides have both nanomolar affinity and high specificity for APN in ex vivo and in vivo models. We envision that the successful demonstration of this integrated novel nanotechnology for peptide screening and identification open a new avenue for rapid discovery of new peptide-based reagents for disease diagnostics and therapeutics.

Flow-through cell electroporation microchip integrating dielectrophoretic viable cell sorting.

Microfluidics based continuous cell electroporation is an appealing approach for high-throughput cell transfection, but cell viability of existing methods is usually compromised by adverse electrical or hydrodynamic effects. Here we present the validation of a flow-through cell electroporation microchip, in which dielectrophoretic force was employed to sort viable cells. By integrating parallel electroporation electrodes and dielectrophoresis sorting electrodes together in a simple straight microfluidic channel, sufficient electrical pulses were applied for efficient electroporation, and a proper sinusoidal electrical field was subsequently utilized to exclude damaged cells by dielectrophoresis. Thus, the difficulties for seeking the fine balance between electrotransfection efficiency and cell viability were steered clear. After careful investigation and optimization of the DEP behaviors of electroporated cells, efficient electrotransfection of plasmid DNA was demonstrated in vulnerable neuron cells and several hard-to-transfect primary cell types with excellent cell viability. This microchip constitutes a novel way of continuous cell transfection to significantly improve the cell viability of existing methodologies.

Label-free detection microarray for novel peptide ligands screening base on MS-SPRi combination.

Peptides ligands with high affinity and high specificity towards specific targets is catching a good deal of interests in biomedical field. Traditional peptide screening procedure involves selection, sequencing and characterization and each step is time-consuming and labor-intensive. The combination between different analytical methods could provide an integrated plan for efficient peptide screening. We report herein a label-free detection microarray system to facilitate the whole one-bead-one-compound (OBOC) peptide screening process. A microwell array chip with two identical units can trap the candidate peptide beads in one-well-one-bead manner. Peptides on beads were photo-released in situ in the well and partly transferred to two identical chips for Surface Plasmon Resonance imaging (SPRi), and peptide left in the bi-unit microwell array chip was remain for in situ single bead sequencing by matrix-assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF-MS). Using the bi-unit imprinted chip system, affinity peptides towards AD protein were efficiently screened out both qualitatively and quantitatively from 10(4) candidates. The method provides a universal solution for high efficiency and high throughput ligands screening.

Electroporation on microchips: the harmful effects of pH changes and scaling down

Electroporation has been widely used in delivering foreign biomolecules into cells, but there is still much room for improvement, such as cell viability and integrity. In this manuscript, we investigate the distribution and the toxicity of pH changes during electroporation, which significantly decreases cell viability. A localized pH gradient forms between anode and cathode leading to a localized distribution of cell death near the electrodes, especially cathodes. The toxicity of hydroxyl ions is severe and acute due to their effect in the decomposition of phospholipid bilayer membrane. On the other hand, the electric field used for electroporation aggravates the toxicity of hydroxyl because the electropermeabilization of cell membrane makes bilayer structure more loosen and vulnerable. We also investigate the side effects during scaling down the size of electrodes in electroporation microchips. Higher percentage of cells is damaged when the size of electrodes is smaller. At last, we propose an effective strategy to constrain the change of pH by modifying the composition of electroporation buffer. The modified buffer decreases the changes of pH, thus enables high cell viability even when the electric pulse duration exceeds several milliseconds. This ability has potential advantage in some applications that require long-time electric pulse stimulation.

A Flow-Through Cell Electroporation Device for Rapidly and Efficiently Transfecting Massive Amounts of Cells in vitro and ex vivo

Continuous cell electroporation is an appealing non-viral approach for genetically transfecting a large number of cells. Yet the traditional macro-scale devices suffer from the unsatisfactory transfection efficiency and/or cell viability due to their high voltage, while the emerging microfluidic electroporation devices is still limited by their low cell processing speed. Here we present a flow-through cell electroporation device integrating large-sized flow tube and small-spaced distributed needle electrode array. Relatively large flow tube enables high flow rate, simple flow characterization and low shear force, while well-organized needle array electrodes produce an even-distributed electric field with low voltage. Thus the difficulties for seeking the fine balance between high flow rate and low electroporation voltage were steered clear. Efficient in vitro electrotransfection of plasmid DNA was demonstrated in several hard-to-transfect cell lines. Furthermore, we also explored ex vivo electroporated mouse erythrocyte as the carrier of RNA. The strong ability of RNA loading and short exposure time of freshly isolated cells jointly ensured a high yield of valid carrier erythrocytes, which further successfully delivered RNA into targeted tissue. Both in vitro and ex vivo electrotransfection could be accomplished at high cell processing speed (20 million cells per minute) which remarkably outperforms previous devices.

A Pliable Electroporation Patch (ep-Patch) for Efficient Delivery of Nucleic Acid Molecules into Animal Tissues with Irregular Surface Shapes

Delivery of nucleic acids into animal tissues by electroporation is an appealing approach for various types of gene therapy, but efficiency of existing methodsis not satisfactory. Here we present the validation of novel electroporation patch (ep-Patch) for efficient delivery of DNA and siRNA into mouse tissues. Using micromachining technology, closely spaced gold electrodes were made on the pliable parylene substrate to form a patch-like electroporation metrics. It enabled large coverage of the target tissues and close surface contact between the tissues and electrodes, thus providing a uniform electric field to deliver nucleic acids into tissues, even beneath intact skin. Using this ep-Patch for efficiently delivery of both DNA and siRNA, non-invasive electroporation of healthy mouse muscle tissue was successfully achieved. Delivery of these nucleic acids was performed to intact tumors with satisfactory results. Silencing of tumor genes using the ep-Patch was also demonstrated on mice. This pliable electroporation patch method constitutes a novel way of in vivo delivery of siRNA and DNA to certain tissues or organs to circumvent the disadvantages of existing methodologies for in vivo delivery of nucleic acid molecules.

Method for Electric Parametric Characterization and Optimization of Electroporation on a Chip

We have developed a rapid method to optimize the electric parameters of cell electroporation. In our design, a pair of ring-dot formatted electrodes was used to generate a radial distribution of electric field from the center to the periphery. Varied electric field intensity was acquired in different annulus when an electric pulse was applied. Cells were cultured on the microchips for adherent cell electroporation and in situ observation. The electroporation parameters of electric field intensity were explored and evaluated in terms of cell viability and transfection efficiency. The optimization was performed in consideration of both cell viability, which was investigated to decrease as electric field increases, and the transfection rate, which normally increases at stronger electric field. The electroporation characteristics HEK-293A and Hela cells were investigated, and the optimum parameters were obtained. Verified by a commercial electroporation system as well as self-made microchips endowed the optimization with wider meaning. At last, as applications, we acquired the optimal electroporation pulse intensity of Neuro-2A cells and a type of primary cell (human umbilical vein endothelial cell, HUVEC) by one time electroporation using the proposed method.