Zhenyu Sun

High-yield production of graphene by liquid-phase exfoliation of graphite

Fully exploiting the properties of graphene will require a method for the mass production of this remarkable material. Two main routes are possible: large-scale growth or large-scale exfoliation. Here, we demonstrate graphene dispersions with concentrations up to approximately 0.01 mg ml(-1), produced by dispersion and exfoliation of graphite in organic solvents such as N-methyl-pyrrolidone. This is possible because the energy required to exfoliate graphene is balanced by the solvent-graphene interaction for solvents whose surface energies match that of graphene. We confirm the presence of individual graphene sheets by Raman spectroscopy, transmission electron microscopy and electron diffraction. Our method results in a monolayer yield of approximately 1 wt%, which could potentially be improved to 7-12 wt% with further processing. The absence of defects or oxides is confirmed by X-ray photoelectron, infrared and Raman spectroscopies. We are able to produce semi-transparent conducting films and conducting composites. Solution processing of graphene opens up a range of potential large-area applications, from device and sensor fabrication to liquid-phase chemistry.

MnxOy/NC and CoxOy/NC Nanoparticles Embedded in a Nitrogen-Doped Carbon Matrix for High-Performance Bifunctional Oxygen Electrodes†

Reversible interconversion of water into H2 and O2, and the recombination of H2 and O2 to H2O thereby harnessing the energy of the reaction provides a completely green cycle for sustainable energy conversion and storage. The realization of this goal is however hampered by the lack of efficient catalysts for water splitting and oxygen reduction. We report exceptionally active bifunctional catalysts for oxygen electrodes comprising Mn3O4 and Co3O4 nanoparticles embedded in nitrogen-doped carbon, obtained by selective pyrolysis and subsequent mild calcination of manganese and cobalt N4 macrocyclic complexes. Intimate interaction was observed between the metals and nitrogen suggesting residual M-N(x) coordination in the catalysts. The catalysts afford remarkably lower reversible overpotentials in KOH (0.1u2009M) than those for RuO2, IrO2, Pt, NiO, Mn3O4, and Co3O4, thus placing them among the best non-precious-metal catalysts for reversible oxygen electrodes reported to date.

Multicomponent Solubility Parameters for Single-Walled Carbon Nanotube−Solvent Mixtures

We have measured the dispersibility of single-walled carbon nanotubes in a range of solvents, observing values as high as 3.5 mg/mL. By plotting the nanotube dispersibility as a function of the Hansen solubility parameters of the solvents, we have confirmed that successful solvents occupy a well-defined range of Hansen parameter space. The level of dispersibility is more sensitive to the dispersive Hansen parameter than the polar or H-bonding Hansen parameter. We estimate the dispersion, polar, and hydrogen bonding Hansen parameter for the nanotubes to be = 17.8 MPa(1/2), = 7.5 MPa(1/2), and = 7.6 MPa(1/2). We find that the nanotube dispersibility in good solvents decays smoothly with the distance in Hansen space from solvent to nanotube solubility parameters. Finally, we propose that neither Hildebrand nor Hansen solubility parameters are fundamental quantities when it comes to nanotube-solvent interactions. We show that the previously calculated dependence of nanotube Hildebrand parameter on nanotube diameter can be reproduced by deriving a simple expression based on the nanotube surface energy. We show that solubility parameters based on surface energy give equivalent results to Hansen solubility parameters. However, we note that, contrary to solubility theory, a number of nonsolvents for nanotubes have both Hansen and surface energy solubility parameters similar to those calculated for nanotubes. The nature of the distinction between solvents and nonsolvents remains to be fully understood.

In Situ Controllable Loading of Ultrafine Noble Metal Particles on Titania

Herein we present a novel and facile approach to controllably load ultrafine noble metal nanoparticles on titania through in situ redox reaction between the reductive titanium(III) oxide support and metal salt precursors in aqueous solution. A series of noble metal/TiO(2) nanocomposites with uniform metal dispersion, tunable metal particle size, and narrow metal particle size distribution were obtained.

The solvent-free selective hydrogenation of nitrobenzene to aniline: an unexpected catalytic activity of ultrafine Pt nanoparticles deposited on carbon nanotubes

In this work, we developed a facile and efficient route to deposit ultrafine Pt particles onto multi-walled carbon nanotubes (MWNTs) with the aid of tip sonication. The loading of Pt on the MWNTs could attain the very high level of 50 wt% and the size of the Pt particles could be controllably tuned in the range 1.9–3.5 nm with narrow size distributions. The resultant nanocomposites were applied to catalyze the hydrogenation of nitrobenzene under solvent-free conditions. It was demonstrated that the Pt/MWNT catalysts showed excellent activity with a high turnover frequency (e.g., 69u2006900 h−1) as well as superior selectivity to aniline (e.g., >99%) in this reaction.

Fabrication and characterization of magnetic carbon nanotube composites

Magnetic carbon nanotube (CNT) composites have been successfully fabricated by employing a one-step approach, in which ferrocene decomposed at high temperatures of 350 °C, 425 °C, 500 °C, and transformed into iron oxides to deposit on CNTs. The resulting products were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy, scanning electron microscopy and transmission electron microscopy (TEM). It was found that CNT–maghemite composites sheathed with amorphous carbon-based material were achieved at 500 °C. TEM observation indicated that the produced maghemite particles not only decorated the external walls of CNTs but also were encapsulated within CNTs. The magnetic phase, size and amount of magnetic nanoparticles deposited on the CNTs could be controlled by varying the processing temperature. Magnetic measurements demonstrated that the composites prepared at 500 °C were ferromagnetic, while the composites obtained at 350 °C and 425 °C became superparamagnetic and showed no remanence or coercivity.

Pt−Ru/CeO2/Carbon Nanotube Nanocomposites: An Efficient Electrocatalyst for Direct Methanol Fuel Cells

Pt-Ru/CeO(2)/multiwalled carbon nanotube (MWNT) electrocatalysts were prepared using a rapid sonication-facilitated deposition method and were characterized by X-ray diffraction (XRD), X-ray photoemission spectroscopy (XPS), transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDS), and voltammetry. Morphological characterization by TEM revealed that CeO(2) nanoparticles (NPs) were in intimate contact with Pt-Ru NPs, and both were highly dispersed on the exteriors of nanotubes with a small size and a very narrow size distribution. Compared with the Pt-Ru/MWNT and Pt/MWNT electrocatalysts, the as-prepared Pt-Ru/CeO(2)/MWNT exhibited a significantly improved electrochemically active surface area (ECSA) and a remarkably enhanced activity toward methanol oxidation. The effects of the Pt-Ru loading and the Pt-to-Ru molar ratio on the electrocatalytic activity of Pt-Ru/CeO(2)/MWNT for methanol oxidation were investigated. We found that a maximum activity toward methanol oxidation reached at the 10 wt % of Pt-Ru loading and 1:1 of Pt-to-Ru ratio. Moreover, the role of CeO(2) in the catalysts for the enhancement of methanol oxidation was discussed in terms of both bifunctional mechanism and electronic effects.

Study on the Anatase to Rutile Phase Transformation and Controlled Synthesis of Rutile Nanocrystals with the Assistance of Ionic Liquid

We developed a route to synthesize rutile TiO(2) nanocrystals (NCs) with the assistance of 1-butyl-3-methylimidazolium chloride (bmim(+)Cl(-)). The phase transformation from anatase to rutile phase was investigated, and a simple model to describe the phase transformation process was proposed considering that the nucleation and growth of rutile phase were determined by the aggregation manner of anatase NCs and Ostwald ripening process, respectively. It was demonstrated that the surfactant-like nature of the IL used was crucial for controlling the crystallization process via controlling the aggregation manner of the NCs. The phase, shape, and size of TiO(2) NCs could be tuned by the controlling the operating conditions, such as temperature, solution acidity, and reactant concentration of the bmim(+)Cl(-)/TiCl(4)/H(2)O reaction system. Phase-pure rutile multipods and 1D nanorods with different sizes were controllably obtained.

Two-dimensional nanosheets for electrocatalysis in energy generation and conversion

The 2D structures and tunable properties of nanosheets make them intriguing catalytic materials. This research area is being driven by a need to replace scarce noble metal-based catalysts in energy technologies. We describe recent advances in nanosheet electrocatalysis of oxygen reduction, oxygen evolution, hydrogen evolution, and CO2 reduction reactions. We find at this early stage of development that nanosheet catalysis has surpassed classical noble metal catalysts in several of these applications and is showing high potential in others. CO2 reduction to methane is now catalyzed best by metal-free carbon nanosheets. These trends will likely transform heterogeneous catalysis.

Highly Concentrated Aqueous Dispersions of Graphene Exfoliated by Sodium Taurodeoxycholate: Dispersion Behavior and Potential Application as a Catalyst Support for the Oxygen‐Reduction Reaction

A high-yielding exfoliation of graphene at high concentrations in aqueous solutions is critical for both fundamental study and future applications. Herein, we demonstrate the formation of stable aqueous dispersions of pristine graphene by using the surfactant sodium taurodeoxycholate under tip sonication at concentrations of up to 7.1 mg mL(-1). TEM showed that about 8% of the graphene flakes consisted of monolayers and 82% of the flakes consisted of less than five layers. The dispersions were stable regardless of freezing (-20 °C) or heat treatment (80 °C) for 24 h. The concentration could be significantly improved to about 12 mg mL(-1) by vacuum-evaporation of the dispersions at ambient temperature. The as-prepared graphene dispersions were readily cast into conductive films and were also processed to prepare Pt/graphene nanocomposites that were used as highly active electrocatalysts for the oxygen-reduction reaction.