Zhifeng Fu

Chemiluminescence reaction kinetics-resolved multianalyte immunoassay strategy using a bispecific monoclonal antibody as the unique recognition reagent.

The multianalyte immunoassay (MIA) has attracted increasing attention due to its high sample throughput, short assay time, low sample consumption, and reduced overall cost. However, up to now, the reported MIA methods commonly require multiple antibodies since each antibody can recognize only one antigen. Herein, a novel bispecific monoclonal antibody (BsMcAb) that could bind methyl parathion and imidacloprid simultaneously was produced by a hybrid hybridomas strategy. A chemiluminescence (CL) reaction kinetics-resolved strategy was designed for MIA of methyl parathion and imidacloprid using the BsMcAb as the unique recognition reagent. Horseradish peroxidase (HRP) and alkaline phosphatase (ALP) were adopted as the signal probes to tag the haptens of the two pesticides due to their very different CL kinetic characteristics. After competitive immunoreactions, the HRP-tagged methyl parathion hapten and the ALP-tagged imidacloprid hapten were simultaneously bound to the BsMcAb since there were two different antigen-binding sites in it. Then, two CL reactions were simultaneously triggered by adding the CL coreactants, and the signals for methyl parathion and imidacloprid detections were collected at 0.6 and 1000 s, respectively. The linear ranges for methyl parathion and imidacloprid were both 1.0-500 ng/mL, with detection limits of 0.33 ng/mL (S/N = 3). The proposed method was successfully used to detect pesticides spiked in ginseng and American ginseng with acceptable recoveries of 80-118%. This proof-of-principle work demonstrated the feasibility of MIA using only one antibody.

Dual-recognition detection of Staphylococcus aureus using vancomycin-functionalized magnetic beads as concentration carriers

Vancomycin, which has a strong antibacterial effect to Gram-positive bacteria, was adopted as one molecular recognition agent for bacterial detection. Magnetic beads (MBs) were functionalized with this antibiotic to effectively concentrate Staphylococcus aureus (S. aureus). In addition, alkaline phosphatase (ALP)-tagged rabbit immunoglobulin G (ALP-IgG) was used as the second recognition agent to improve the specificity based on the binding between the Fc region of rabbit IgG and protein A in the cell wall of S. aureus. MBs-concentrated sandwich complex of vancomycin/S. aureus/ALP-IgG was formed with a one-step incubation protocol. Then ALP chemiluminescent reaction was triggered by injecting substrate solution to quantitate S. aureus. Based on the sandwich molecular recognition mechanism and MBs concentration, an ultrasensitive, specific and rapid method was developed for S. aureus detection. The linear range for S. aureus detection was 12-1.2 × 10(6)CFU mL(-1), with a very low detection limit of 3.3 CFU mL(-1). The whole detection process could be completed in 75 min. Other Gram-positive bacteria and Gram-negative bacteria, including Escherichia coli, Salmonella, Pseudomonas aeruginosa, Micrococcus luteus, Bacillus cereus and Bacillus subtilis, showed negligible interference to S. aureus detection. This method was successfully used to quantitate S. aureus in lake water, milk, human urine and human saliva with acceptable recoveries ranging from 70.0% to 116.7%.

An ultra-facile and label-free immunoassay strategy for detection of copper (II) utilizing chemiluminescence self-enhancement of Cu (II)-ethylenediaminetetraacetate chelate.

The establishment of facile, rapid, sensitive and cost-effective protocols for the detection of heavy metals is of great significance for human health and environmental monitoring. Hereby, an ultra-facile and label-free immunoassay strategy was designed for detecting heavy metal ion by using Cu (II) as the model analyte. Cu (II) reacted previously with ethylenediaminetetraacetate (EDTA) was captured by immobilized monoclonal antibody for Cu (II)-EDTA chelate. Then Cu (II) was detected based on the self-enhancing effect of Cu (II)-EDTA chelate to luminol-H2O2 chemiluminescence reaction. The CL intensity is linear relative with Cu (II) concentration in a very wide range of 1.0-1000ng/mL, with a detection limit of 0.33ng/mL (S/N=3). Since the specificity of this proposed strategy relied on both the specificity of monoclonal antibody and the specificity of luminol-H2O2 system, it could avoid interference from most common ions. The proposed method was used successfully to detect Cu (II) in traditional Chinese medicine and environmental water samples with acceptable recovery values of 82-113%. This proof-of-principle work demonstrated the feasibility of the label-free immunoassay for heavy metal ions, and opened a new avenue for rapid screening and field assay for drug safety, environmental monitoring and clinical diagnosis.

Sandwich Fluorimetric Method for Specific Detection of Staphylococcus aureus Based on Antibiotic-Affinity Strategy

A novel antibiotic-affinity strategy was designed for fluorimetric detection of pathogenic bacteria based on the strong affinity of antibiotic agent to the cell wall of bacteria. In this proof-of-concept work, vancocin, a glycopeptide antibiotic for Gram-positive bacteria, was used as a molecular recognition agent to anchor Staphylococcus aureus (S. aureus) cell. To improve the specificity of this method for S. aureus detection, IgG was adopted as the second recognition agent utilizing the binding between Fc region of IgG and S. aureus protein A in the cell wall, to form a sandwich complex. By using fluorescein isothiocyanate as the signal probe, S. aureus whole cells could be directly assayed within a linear range of 1.0 × 10(3)-1.0 × 10(9) CFU mL(-1) with a detection limit of 2.9 × 10(2) CFU mL(-1). The whole assay process could be completed within 130 min when a ready-for-use microplate was adopted. This proposed strategy for pathogenic bacteria detection possessed some attractive characteristics such as high sensitivity, wide linear range, simple manipulation, short assay time, and low cost. Furthermore, this sandwich mode also showed ideal specificity because vancocin and IgG bound with S. aureus at two distinct sites. It opened up a new pathway for high-throughput screening of pathogenic bacteria in medical diagnosis, food safety, bioterrorism defense, and drug discovery.

A novel immunochromatographic assay based on a time-resolved chemiluminescence strategy for the multiplexed detection of ractopamine and clenbuterol

A novel multiplexed immunochromatographic assay (ICA) based on a time-resolved chemiluminescence (CL) strategy was developed for quantitative detection of β-agonists, by utilizing ractopamine (RAC) and clenbuterol (CLE) as the models. Different from conventional multiplexed ICA methods which usually require two or more test lines, this strategy was developed for detection of two β-agonists by using only one test line on the nitrocellulose membrane. In this study, horseradish peroxidase and alkaline phosphatase were used as the signal probes to label RAC antibody and CLE antibody, respectively. The two CL reactions with flash type and glow type kinetics characteristics were triggered simultaneously by injecting the coreactants, then the signals for RAC and CLE detections were recorded at 3xa0s and 300xa0s after coreactants injection, respectively. Owing to the utilization of CL detection, this protocol showed ideal sensitivity for quantitation. Under the optimal conditions, the detection limits for RAC and CLE were 0.17xa0ngxa0mL(-1) and 0.067xa0ngxa0mL(-1)xa0(S/Nxa0=xa03), respectively. The whole assay process can be accomplished within 20xa0min without complicated sample pretreatment. The proposed method was successfully applied for the detection of RAC and CLE in spiked swine urine. It opens up a new pathway for designing a low cost, time-efficiency and multiplexed strategy for rapid screening and field assay.

Label-free electrochemiluminescent biosensor for rapid and sensitive detection of pseudomonas aeruginosa using phage as highly specific recognition agent

A virulent phage named as PaP1 was isolated from hospital sewage based on a lambda phage isolation protocol. This phage showed a strong and highly specific binding ability to Pseudomonas aeruginosa (P. aeruginosa). Using this isolated phage as a recognition agent, a novel electrochemiluminescent (ECL) biosensor was developed for label-free detection of P. aeruginosa. The biosensor was fabricated through depositing phage-conjugated carboxyl graphene onto the surface of a glass carbon electrode. After specific binding of the host bacteria through the adsorption of P. aeruginosa cell wall by phage tail fibers and baseplate, the ECL signal of luminol suffered a decrease since the formed non-conductive biocomplex obstructed the interfacial electron transfer and blocked the diffusion of the ECL active molecules. The ECL emission declined linearly with P. aeruginosa concentration in the range of 1.4×102 -1.4×106CFUmL-1, with a very low detection limit of 56CFUmL-1. The whole detection process could be completed within 30min as a ready-for-use biosensor was adopted. This biosensor was successfully applied to quantitate P. aeruginosa in milk, glucose injection and human urine with acceptable recovery values ranging from 78.6% to 114.3%.

Highly Specific Bacteriophage-Affinity Strategy for Rapid Separation and Sensitive Detection of Viable Pseudomonas aeruginosa

A virulent bacteriophage highly specific to Pseudomonas aeruginosa (P. aeruginosa) was isolated from hospital sewage using a lambda bacteriophage isolation protocol. The bacteriophage, named as PAP1, was used to functionalize tosyl-activated magnetic beads to establish a bacteriophage-affinity strategy for separation and detection of viable P. aeruginosa. Recognition of the target bacteria by tail fibers and baseplate of the bacteriophage led to capture of P. aeruginosa onto the magnetic beads. After a replication cycle of about 100 min, the progenies lysed the target bacteria and released the intracellular adenosine triphosphate. Subsequently, firefly luciferase-adenosine triphosphate bioluminescence system was used to quantitate the amount of P. aeruginosa. This bacteriophage-affinity strategy for viable P. aeruginosa detection showed a linear range of 6.0 × 102 to 3.0 × 105 CFU mL-1, with a detection limit of 2.0 × 102 CFU mL-1. The whole process for separation and detection could be completed after bacteria capture, bacteriophage replication, and bacteria lysis within 2 h. Since the isolated bacteriophage recognized the target bacteria with very high specificity, the proposed strategy did not show any signal response to all of the tested interfering bacteria. Furthermore, it excluded the interference from inactivated P. aeruginosa because the bacteriophage could replicate only in viable cells. The proposed strategy had been applied for detection of P. aeruginosa in glucose injection, human urine, and rat plasma. In the further work, this facile bacteriophage-affinity strategy could be extended for detection of other pathogens by utilizing virulent bacteriophage specific to other targets.

Colorimetric and chemiluminescent dual-readout immunochromatographic assay for detection of pesticide residues utilizing g-C3N4/BiFeO3 nanocomposites

Graphitic carbon nitride/bismuth ferrite nanocomposites (g-C3N4/BiFeO3 NCs) were synthesized by a facile one step sol-gel combustion method and employed as a peroxidase-like catalyst. Based on the catalytical activity on the luminol-H2O2 reaction, the nanocomposites were utilized as a colorimetric/chemiluminescent dual-readout immunochromatographic assay (ICA) for the multiplexed detection of pesticide residues by utilizing chlorpyrifos and carbaryl as the model analytes. In the proposed protocol, chlorpyrifos antibody and carbaryl antibody were tagged to g-C3N4/BiFeO3 NCs for developing the spatially-resolved multianalyte ICA. After two competitive immunoreactions completed on the ICA test strip, the tracer antibodies were captured by the immobilized antigens on two test lines. The accumulation of g-C3N4/BiFeO3 NCs led to the appearance of brown color, which were observed as a colorimetric and semi-quantitative signal. Furthermore, the g-C3N4/BiFeO3 NCs-driven generation of CL signal was collected as a sensitively quantitative signal after initiating the luminol-H2O2 reaction on the test lines. Under the optimal conditions, the limits of detection of chlorpyrifos and carbaryl were both 0.033ng/mL. The dual-readout ICA was successfully used to detect chlorpyrifos and carbaryl spiked in environmental water and traditional Chinese medicine samples with acceptable recovery values of 80-119% and 90-118%. Due to many advantages including low cost, time efficiency, high sensitivity and good portability, the novel ICA showed great potential in many areas such as drug safety, environmental monitoring and clinical diagnosis.

Multiplexed immunochromatographic test strip for time-resolved chemiluminescent detection of pesticide residues using a bifunctional antibody.

A novel bifunctional antibody (BfAb) that could recognize methyl parathion and imidacloprid simultaneously was prepared by a hybrid hybridomas technique. Using the BfAb as the sole recognition reagent, a multiplexed immunochromatographic test strip based on a time-resolved chemiluminescence (CL) strategy was developed for quantitative detection of pesticide residues. Horseradish peroxidase (HRP) and alkaline phosphatase (ALP) were used as the CL probes to label the haptens of methyl parathion and imidacloprid, respectively. After the labeled haptens competed with methyl parathion and imidacloprid to bind with the BfAb immobilized on the test strip, the two CL reactions catalyzed by the enzymes were triggered simultaneously by coreactants injection. Due to the distinct CL kinetics characteristics of HRP and ALP, the signals for methyl parathion and imidacloprid detections were collected at 2.5s and 300s, respectively. The linear ranges for methyl parathion and imidacloprid were both 0.1-250ngmL-1, with detection limits of 0.058ngmL-1 (S/N=3). The whole assay process could be accomplished within 22min. The detection results for spiked traditional Chinese medicine samples demonstrated its application potential. The proposed method provided a low-cost, facile and rapid tool for multiplexed screening of pesticide residues using single antibody.

Specific chemiluminescent protocol for dual-site recognition of Streptococcus mutans utilizing strong affinity between teicoplanin and Gram-positive bacteria

A novel dual-site recognition protocol was developed for chemiluminescent (CL) detection of Streptococcus mutans (S. mutans) based on a designed antibiotic-affinity strategy. Teicoplanin, a broad-spectrum antibiotic against Gram-positive bacteria, was adopted to functionalize magnetic particles and recognize S. mutans utilizing the strong affinity between this agent and D-Alanyl-D-Alanine peptide moieties in the bacterial cell wall. To achieve ideal specificity for S. mutans detection, rat immunoglobulin G2a (rat IgG2a) tagged with horseradish peroxidase (HRP) was used as the second recognition agent and signal tracer since Fab region of rat IgG2a could bind with streptococcal protein G highly expressed in the cell wall of S. mutans. Thus HRP-tagged sandwich complex of teicoplanin/S. mutans/rat IgG2a was formed on the magnetic particles, followed by a CL quantification of S. mutans based on a HRP-catalyzed luminol-H2O2-p-iodophenol CL reaction. This dual-site recognition protocol showed a linear range of 1.0 × 102-1.0 × 106 CFU mL-1 and a detection limit of 33 CFU mL-1 for S. mutans detection. The whole detection process could be completed within 70min. The recovery tests for food, environmental, pharmaceutical and biological samples showed acceptable recovery values between 83.0% and 110.0%, demonstrating its application potential for detection of bacteria in various sample matrixes.