Zhihai Zhang

Creation of Sub-diffraction Longitudinally Polarized Spot by Focusing Radially Polarized Light with Binary Phase Lens

The generation of a sub-diffraction longitudinally polarized spot is of great interest in various applications, such as optical tweezers, super-resolution microscopy, high-resolution Raman spectroscopy, and high-density optical data storage. Many theoretical investigations have been conducted into the tight focusing of a longitudinally polarized spot with high-numerical-aperture aplanatic lenses in combination with optical filters. Optical super-oscillation provides a new approach to focusing light beyond the diffraction limit. Here, we propose a planar binary phase lens and experimentally demonstrate the generation of a longitudinally polarized sub-diffraction focal spot by focusing radially polarized light. The lens has a numerical aperture of 0.93 and a long focal length of 200λ for wavelength λ = 632.8 nm, and the generated focal spot has a full-width-at-half-maximum of about 0.456λ, which is smaller than the diffraction limit, 0.54λ. A 5λ-long longitudinally polarized optical needle with sub-diffraction size is also observed near the designed focal point.

Super-oscillatory focusing of circularly polarized light by ultra-long focal length planar lens based on binary amplitude-phase modulation.

In traditional optics, the focal spot size of a conventional lens is restricted to the diffraction limit 0.5λ/NA, where λ is the wavelength in vacuum and NA is the numerical aperture of the lens. Recently, various sub-diffraction focusing optical devices have been demonstrated, but they usually have short focal length and high numerical aperture. Moreover, they always suffer the problem of huge sidelobes near the focal spot and small field of view, especially when the focal spot size is less than the super-oscillation criteria 0.38λ/NA. To address the problem, here, we reported a far-field sub-diffraction point-focusing lens based on binary phase and amplitude modulation with ultra-long focal length 252.8 μm (399.5λ) and small numerical aperture 0.78, and experimentally demonstrated a super-oscillatory focusing of circularly polarized light with spot size 287 nm (0.454λ), smaller than the diffraction limit 0.64λ and the super-oscillation criterion 0.487λ. What’s more, on the focal plane, in the measured area within the radius of 142λ, the largest sidelobe intensity is less than 26% of the central lobe intensity. Such ultra-long distance super-oscillatory focusing with small sidelobes and large field of view has great potential applications in far-field super-resolution microscopy, ultra-high-density optical storage and nano-fabrication.

Generation of a sub-diffraction hollow ring by shaping an azimuthally polarized wave

The generation of a sub-diffraction optical hollow ring is of great interest in various applications, such as optical microscopy, optical tweezers, and nanolithography. Azimuthally polarized light is a good candidate for creating an optical hollow ring structure. Various of methods have been proposed theoretically for generation of sub-wavelength hollow ring by focusing azimuthally polarized light, but without experimental demonstrations, especially for sub-diffraction focusing. Super-oscillation is a promising approach for shaping sub-diffraction optical focusing. In this paper, a planar sub-diffraction diffractive lens is proposed, which has an ultra-long focal length of 600 λ and small numerical aperture of 0.64. A sub-diffraction hollow ring is experimentally created by shaping an azimuthally polarized wave. The full-width-at-half-maximum of the hollow ring is 0.61 λ, which is smaller than the lens diffraction limit 0.78 λ, and the observed largest sidelobe intensity is only 10% of the peak intensity.

Planar binary-phase lens for super-oscillatory optical hollow needles

Optical hollow beams are suitable for materials processing, optical micromanipulation, microscopy, and optical lithography. However, conventional optical hollow beams are diffraction-limited. The generation of sub-wavelength optical hollow beams using a high numerical aperture objective lens and pupil filters has been theoretically proposed. Although sub-diffraction hollow spot has been reported, nondiffracting hollow beams of sub-diffraction transverse dimensions have not yet been experimentally demonstrated. Here, a planar lens based on binary-phase modulation is proposed to overcome these constraints. The lens has an ultra-long focal length of 300λ. An azimuthally polarized optical hollow needle is experimentally demonstrated with a super-oscillatory transverse size (less than 0.38λ/NA) of 0.34λ to 0.42λ, where λ is the working wavelength and NA is the lens numerical aperture, and a large depth of focus of 6.5λ. For a sub-diffraction transverse size of 0.34λ to 0.52λ, the nondiffracting propagation distance of the proposed optical hollow needle is greater than 10λ. Numerical simulation also reveals a good penetrability of the proposed optical hollow needle at an air-water interface, where the needle propagates through water with a doubled propagation distance and without loss of its super-oscillatory property. The proposed lens is suitable for nanofabrication, optical nanomanipulation, super-resolution imaging, and nanolithography applications.

Synthesis of sub-diffraction quasi-non-diffracting beams by angular spectrum compression

Quasi-non-diffracting beams are attractive for various applications, including optical manipulation, super-resolution microscopes, and materials processing. However, it is a great challenge to design and generate super-long quasi-non-diffracting beams with sub-diffraction and sub-wavelength size. In this paper, a method based on the idea of compressing a normalized angular spectrum is developed, which makes it possible and provides a practical tool for the design of a quasi-non-diffracting beam with super-oscillatory sub-wavelength transverse size. It also presents a clear physical picture of the formation of super-oscillatory quasi-non-diffracting beams. Based on concepts of a local grating and super-oscillation, a lens was designed and fabricated for a working wavelength of λ = 632.8 nm. The validity of the idea of normalized angular spectrum compression was confirmed by both numerical investigations and experimental studies. An optical hollow needle with a length of more than 100λ was experimentally demonstrated, in which an optical hollow needle was observed with a sub-diffraction and sub-wavelength transverse size within a non-diffracting propagation distance of 94λ. Longer non-diffracting propagation distance is expected for a lens with larger radius and shorter effective wavelength.

Creating a nondiffracting beam with sub-diffraction size by a phase spatial light modulator

Due to its unique properties of nondiffracting propagation, highly-localized intensity distribution, small beam cross-section, and self-healing, a nondiffracting beam is attractive for materials processing, microscopy, and optical research. Various methods have been investigated to generate such beams with conventional optics. However, the transverse size of those nondiffracting beams is restricted by the diffraction-limit. To overcome the diffraction limit, we use the concepts of super-oscillation and the vectorial angular spectrum method to design a phase mask mirror with a focal length of 1 m, radius of 5 mm, and numerical aperture of about 0.005 for a wavelength of 632.8 nm. The phase mask mirror was created with a phase spatial light modulator. Under the illumination of a linearly polarized Gaussian wave, a nondiffracting beam was created with sub-diffraction transverse size. The maximum transverse size of the beam is smaller than the diffraction limit of 0.5λ/NA for a propagation distance greater than 43.3 mm. A nondiffracting beam with smaller transverse size can be realized by further increasing the NA value.

Optimization-free approach for generating sub-diffraction quasi-non-diffracting beams

Sub-diffraction quasi-non-diffracting beams with sub-wavelength transverse size are attractive for applications such as optical nano-manipulation, optical nano-fabrication, optical high-density storage, and optical super-resolution microscopy. In this paper, we proposed an optimization-free design approach and demonstrated the possibility of generating sub-diffraction quasi-non-diffracting beams with sub-wavelength size for different polarizations by a binary-phase Fresnel planar lens. More importantly, the optimization-free method significantly simplifies the design procedure and the generation of sub-diffracting quasi-non-diffracting beams. Utilizing the concept of normalized angular spectrum compression, for wavelength λ0 = 632.8 nm, a binary-phase Fresnel planar lens was designed and fabricated. The experimental results show that the sub-diffraction transverse size and the non-diffracting propagation distances are 0.40λ0-0.54λ0 and 90λ0, 0.43λ0-0.54λ0 and 73λ0, and 0.34λ0-0.41λ0 and 80λ0 for the generated quasi-non-diffracting beams with circular, longitudinal, and azimuthal polarizations, respectively.