Zhong

Diffraction enhanced x-ray imaging

Diffraction enhanced imaging is a new x-ray radiographic imaging modality using monochromatic x-rays from a synchrotron which produces images of thick absorbing objects that are almost completely free of scatter. They show dramatically improved contrast over standard imaging applied to the same phantom. The contrast is based not only on attenuation but also the refraction and diffraction properties of the sample. This imaging method may improve image quality for medical applications, industrial radiography for non-destructive testing and x-ray computed tomography.

Gold nanoparticles enhance the radiation therapy of a murine squamous cell carcinoma

The purpose of this study is to test the hypothesis that gold nanoparticle (AuNP, nanogold)-enhanced radiation therapy (nanogold radiation therapy, NRT) is efficacious when treating the radiation resistant and highly aggressive mouse head and neck squamous cell carcinoma model, SCCVII, and to identify parameters influencing the efficacy of NRT. Subcutaneous (sc) SCCVII leg tumors in mice were irradiated with x-rays at the Brookhaven National Laboratory (BNL) National Synchrotron Light Source (NSLS) with and without prior intravenous (iv) administration of AuNPs. Variables studied included radiation dose, beam energy, temporal fractionation and hyperthermia. AuNP-mediated NRT was shown to be effective for the sc SCCVII model. AuNPs were more effective at 42 Gy than at 30 Gy (both at 68 keV median beam energy) compared to controls without gold. Similarly, at 157 keV median beam energy, 50.6 Gy NRT was more effective than 44 Gy NRT. At the same radiation dose ( approximately 42 Gy), 68 keV was more effective than 157 keV. Hyperthermia and radiation therapy (RT) were synergistic and AuNPs enhanced this synergy, thereby further reducing TCD50 s (tumor control dose 50%) and increasing long-term survivals. It is concluded that gold nanoparticles enhance the radiation therapy of a radioresistant mouse squamous cell carcinoma. The data show that radiation dose, energy and hyperthermia influence efficacy and better define the potential utility of gold nanoparticles for cancer x-ray therapy.

Multiple-image radiography

Conventional radiography produces a single image of an object by measuring the attenuation of an x-ray beam passing through it. When imaging weakly absorbing tissues, x-ray attenuation may be a suboptimal signature of disease-related information. In this paper we describe a new phase-sensitive imaging method, called multiple-image radiography (MIR), which is an improvement on a prior technique called diffraction-enhanced imaging (DEI). This paper elaborates on our initial presentation of the idea in Wernick et al (2002 Proc. Int. Symp. Biomed. Imaging pp 129-32). MIR simultaneously produces several images from a set of measurements made with a single x-ray beam. Specifically, MIR yields three images depicting separately the effects of refraction, ultra-small-angle scatter and attenuation by the object. All three images have good contrast, in part because they are virtually immune from degradation due to scatter at higher angles. MIR also yields a very comprehensive object description, consisting of the angular intensity spectrum of a transmitted x-ray beam at every image pixel, within a narrow angular range. Our experiments are based on data acquired using a synchrotron light source; however, in preparation for more practical implementations using conventional x-ray sources, we develop and evaluate algorithms designed for Poisson noise, which is characteristic of photon-limited imaging. The results suggest that MIR is capable of operating at low photon count levels, therefore the method shows promise for use with conventional x-ray sources. The results also show that, in addition to producing new types of object descriptions, MIR produces substantially more accurate images than its predecessor, DEI. MIR results are shown in the form of planar images of a phantom and a biological specimen. A preliminary demonstration of the use of MIR for computed tomography is also presented.

DIFFRACTION ENHANCED X-RAY IMAGING OF ARTICULAR CARTILAGE

OBJECTIVE To introduce a novel X-ray technology, diffraction-enhanced X-ray imaging (DEI), in its early stages of development, for the imaging of articular cartilage. DESIGN Disarticulated and/or intact human knee and talocrural joints displaying both undegenerated and degenerated articular cartilage were imaged with DEI. A series of three silicon crystals were used to produce a highly collimated monochromatic X-ray beam to achieve scatter-rejection at the microradian level. The third crystal (analyser) was set at different angles resulting in images displaying different characteristics. Once the diffraction enhanced (DE) images were obtained, they were compared to gross and histological examination. RESULTS Articular cartilage in both disarticulated and intact joints could be visualized through DEI. For each specimen, DE images were reflective of their gross and histological appearance. For each different angle of the analyser crystal, there was a slight difference in appearance in the specimen image, with certain characteristics changing in their contrast intensity as the analyser angle changed. CONCLUSIONS DEI is capable of imaging articular cartilage in disarticulated, as well as in intact joints. Gross cartilage defects, even at early stages of development, can be visualized due to a combination of high spatial resolution and detection of X-ray refraction, extinction and absorption patterns. Furthermore, DE images displaying contrast heterogeneities indicative of cartilage degeneration correspond to the degeneration detected by gross and histological examination.

Implementation of diffraction-enhanced imaging experiments: at the NSLS and APS

Di!raction-enhanced imaging is a recently developed X-ray imaging technique that has demonstrated enhanced contrast for dense, highly absorbing materials of interest in materials science and medicine. The implementation of this technique in experiments at the National Synchrotron Light Source and at the Advanced Photon Source is described in detail. ( 2000 Elsevier Science B.V. All rights reserved.

Single- and dual-energy CT with monochromatic synchrotron x-rays

We explored the potential for clinical research of computed tomography (CT) with monochromatic x-rays using the preclinical multiple energy computed tomography (MECT) system at the National Synchrotron Light Source. MECT has a fixed, horizontal fan beam with a subject apparatus rotating about a vertical axis; it will be used for imaging the human head and neck. Two CdWO4-photodiode array detectors with different spatial resolutions were used. A 10.5 cm diameter acrylic phantom was imaged with MECT at 43 keV and with a conventional CT (CCT) at 80 kVp: spatial resolution approximately equal to 6.5 line pairs (lp)/cm for both; slice height, 2.6 mm for MECT against 3.0 mm for CCT; surface dose, 3.1 cGy for MECT against 2.0 cGy for CCT. The resultant image noise was 1.5 HU for MECT against 3 HU for CCT. Computer simulations of the same images with more precisely matched spatial resolution, slice height and dose indicated an image-noise ratio of 1.4:1.0 for CCT against MECT. A 13.5 cm diameter acrylic phantom imaged with MECT at approximately 0.1 keV above the iodine K edge and with CCT showed, for a 240 micrograms I ml-1 solution, an image contrast of 26 HU for MECT and 13 and 9 HU for the 80 and 100 kVp CCT, respectively. The corresponding numbers from computer simulation of the same images were 26, 12, and 9 HU, respectively. MECTs potential for use in clinical research is discussed.

Extraction of extinction, refraction and absorption properties in diffraction enhanced imaging

Diffraction enhanced imaging is a radiographic technique that derives contrast from an objects x-ray absorption, refraction gradient and small angle scatter properties (extinction). In prior work, images obtained using two analyser settings were combined to obtain refraction angle and apparent absorption images. A more general method of determining independently the refraction, absorption and extinction of the object is presented. This approach has been used to model the transmission, refraction and scatter distribution of the sample and to visualize these three physical phenomena separately.

Design and implementation of a compact low-dose diffraction enhanced medical imaging system.

RATIONALE AND OBJECTIVES Diffraction-enhanced imaging (DEI) is a new x-ray imaging modality that differs from conventional radiography in its use of three physical mechanisms to generate contrast. DEI is able to generate contrast from x-ray absorption, refraction, and ultra-small-angle scatter rejection (extinction) to produce high-contrast images with a much lower radiation dose compared to conventional radiography. MATERIALS AND METHODS A prototype DEI system was constructed using a 1-kW tungsten x-ray tube and a single silicon monochromator and analyzer crystal. The monochromator crystal was aligned to reflect the combined Kalpha1 (59.32 keV) and Kalpha2 (57.98 keV) characteristic emission lines of tungsten using a tube voltage of 160 kV. System performance and demonstration of contrast were evaluated using a nylon monofilament refraction phantom, full-thickness breast specimens, a human thumb, and a live mouse. RESULTS Images acquired using this system successfully demonstrated all three DEI contrast mechanisms. Flux measurements acquired using this 1-kW prototype system demonstrated that this design can be scaled to use a more powerful 60-kW x-ray tube to generate similar images with an image time of approximately 30 seconds. This single-crystal pair design can be further modified to allow for an array of crystals to reduce clinical image times to <3 seconds. CONCLUSIONS This paper describes the design, construction, and performance of a new DEI system using a commercially available tungsten anode x-ray tube and includes the first high-quality low-dose diffraction-enhanced images of full-thickness human tissue specimens.

Radiography of soft tissue of the foot and ankle with diffraction enhanced imaging

Non‐calcified tissues, including tendons, ligaments, adipose tissue and cartilage, are not visible, for any practical purposes, with conventional X‐ray imaging. Therefore, any pathological changes in these tissues generally necessitate detection through magnetic resonance imaging or ultrasound technology. Until recently the development of an X‐ray imaging technique that could detect both bone and soft tissues seemed unrealistic. However, the introduction of diffraction enhanced X‐ray imaging (DEI) which is capable of rendering images with absorption, refraction and scatter rejection qualities has allowed detection of specific soft tissues based on small differences in tissue densities. Here we show for the first time that DEI allows high contrast imaging of soft tissues, including ligaments, tendons and adipose tissue, of the human foot and ankle.

A physical model of multiple-image radiography

We recently proposed a phase-sensitive x-ray imaging method called multiple-image radiography (MIR), which is an improvement on the diffraction-enhanced imaging technique. MIR simultaneously produces three images, depicting separately the effects of absorption, refraction and ultra-small-angle scattering of x-rays, and all three MIR images are virtually immune to degradation caused by scattering at higher angles. Although good results have been obtained using MIR, no quantitative model of the imaging process has yet been developed. In this paper, we present a theoretical prediction of the MIR image values in terms of fundamental physical properties of the object being imaged. We use radiative transport theory to model the beam propagation, and we model the object as a stratified medium containing discrete scattering particles. An important finding of our analysis is that the image values in all three MIR images are line integrals of various object parameters, which is an essential property for computed tomography to be achieved with conventional reconstruction methods. Our analysis also shows that MIR truly separates the effects of absorption, refraction and ultra-small-angle scattering for the case considered. We validate our analytical model using real and simulated imaging data.