Zsuzsa Marka

The transient gravitational-wave sky

Interferometric detectors will very soon give us an unprecedented view of the gravitational-wave sky, and in particular of the explosive and transient Universe. Now is the time to challenge our theoretical understanding of short-duration gravitational-wave signatures from cataclysmic events, their connection to more traditional electromagnetic and particle astrophysics, and the data analysis techniques that will make the observations a reality. This paper summarizes the state of the art, future science opportunities, and current challenges in understanding gravitational-wave transients.

Search method for coincident events from LIGO and IceCube detectors

We present a coincidence search method for astronomical events using gravitational wave detectors in conjunction with other astronomical observations. We illustrate our method for the specific case of the LIGO gravitational wave detector and the IceCube neutrino detector. LIGO trigger events and IceCube events which occur within a given time window are selected as time-coincident events. Then the spatial overlap of the reconstructed event directions is evaluated using an unbinned maximum likelihood method. Our method was tested with Monte Carlo simulations based on realistic LIGO and IceCube event distributions. We estimated a typical false alarm rate for the analysis to be 1 event per 435 years. This is significantly smaller than the false alarm rates of the individual detectors.

Bounding the Time Delay between High-energy Neutrinos and Gravitational-wave Transients from Gamma-ray Bursts

We derive a conservative coincidence time window for joint searches of gravitational-wave (GW) transients and high-energy neutrinos (HENs, with energies & 100GeV), emitted by gamma-ray bursts (GRBs). The last are among the most interesting astrophysical sources for coincident detections with current and near-future detectors. We take into account a broad range of emission mechanisms. We take the upper limit of GRB durations as the 95% quantile of the T90’s of GRBs observed by BATSE, obtaining a GRB duration upper limit of 150s. Using published results on high-energy (> 100MeV) photon light curves for 8 GRBs detected by Fermi LAT, we verify that most highenergy photons are expected to be observed within the rst 150s of the

Multimessenger Science Reach and Analysis Method for Common Sources of Gravitational Waves and High-energy Neutrinos

We present the baseline multimessenger analysis method for the joint observations of gravitational waves (GW) and high-energy neutrinos (HEN), together with a detailed analysis of the expected science reach of the joint search. The analysis method combines data from GW and HEN detectors, and uses the blue-luminosity-weighted distribution of galaxies. We derive expected GW+HEN source rate upper limits for a wide range of source parameters covering several emission models. Using published sensitivities of externally triggered searches, we derive joint upper limit estimates both for the ongoing analysis with the initial LIGO-Virgo GW detectors with the partial IceCube detector (22 strings) HEN detector and for projected results to advanced LIGO-Virgo detectors with the completed IceCube (86 strings). We discuss the constraints these upper limits impose on some existing GW+HEN emission models.

Optimal networks of future gravitational-wave telescopes

We aim to find the optimal site locations for a hypothetical network of 1–3 triangular gravitational-wave telescopes. We define the following N-telescope figures of merit (FoMs) and construct three corresponding metrics: (a) capability of reconstructing the signal polarization; (b) accuracy in source localization; and (c) accuracy in reconstructing the parameters of a standard binary source. We also define a combined metric that takes into account the three FoMs with practically equal weight. After constructing a geomap of possible telescope sites, we give the optimal 2-telescope networks for the four FoMs separately in example cases where the location of the first telescope has been predetermined. We found that based on the combined metric, placing the first telescope to Australia provides the most options for optimal site selection when extending the network with a second instrument. We suggest geographical regions where a potential second and third telescope could be placed to get optimal network performance in terms of our FoMs. Additionally, we use a similar approach to find the optimal location and orientation for the proposed LIGO-India detector within a five-detector network with Advanced LIGO (Hanford), Advanced LIGO (Livingston), Advanced Virgo, and KAGRA. We found that the FoMs do not change greatly in sites within India, though the network can suffer a significant loss in reconstructing signal polarizations if the orientation angle of an L-shaped LIGO-India is not set to the optimal value of ~58.2°( + k × 90°) (measured counterclockwise from East to the bisector of the arms).

How to find long narrow-band gravitational wave transients with unknown frequency evolution

We present two general methods, the so-called Locust and the generalized Hough algorithm, to search for narrow-band signals of moderate frequency evolution and limited duration in datastreams of gravitational wave detectors. Some models of long gamma-ray bursts (e.g. van Putten et al 2004 Phys. Rev. D 69 044007) predict narrow-band gravitational wave burst signals of limited duration emitted during the gamma-ray burst event. These types of signals give rise to curling traces of local maxima in the time?frequency space that can be recovered via image processing methods (Locust and Hough). Tests of the algorithms in the context of the van Putten model were carried out using injected simulated signals into Gaussian white noise and also into LIGO-like data. The Locust algorithm has the relative advantage of having higher speed and better general sensitivity; however, the generalized Hough algorithm is more tolerant of trace discontinuities. A combination of the two algorithms increases search robustness and sensitivity at the price of execution speed.

The Advanced LIGO timing system

Gravitational wave detection using a network of detectors relies upon the precise time stamping of gravitational wave signals. The relative arrival times between detectors are crucial, e.g. in recovering the source direction, an essential step in using gravitational waves for multi-messenger astronomy. Due to the large size of gravitational wave detectors, timing at different parts of a given detector also needs to be highly synchronized. In general, the requirement toward the precision of timing is determined such that, upon detection, the deduced (astro-) physical results should not be limited by the precision of timing. The Advanced LIGO optical timing distribution system is designed to provide UTC-synchronized timing information for the Advanced LIGO detectors that satisfies the above criterium. The Advanced LIGO timing system has modular structure, enabling quick and easy adaptation to the detector frame as well as possible changes or additions of components. It also includes a self-diagnostics system that enables the remote monitoring of the status of timing. After the description of the Advanced LIGO timing system, several tests are presented that demonstrate its precision and robustness.

Detecting long-duration narrow-band gravitational wave transients associated with soft gamma repeater quasiperiodic oscillations

We have performed an in-depth concept study of a gravitational wave data analysis method which targets repeated long quasi-monochromatic transients (triggers) from cosmic sources. The algorithm concept can be applied to multi-trigger data sets in which the detector-source orientation and the statistical properties of the data stream change with time, and does not require the assumption that the data is Gaussian. Reconstructing or limiting the energetics of potential gravitational wave emissions associated with quasi-periodic oscillations (QPOs) observed in the X-ray lightcurve tails of soft gamma repeater flares might be an interesting endeavour of the future. Therefore we chose this in a simplified form to illustrate the flow, capabilities, and performance of the method. We investigate performance aspects of a multi-trigger based data analysis approach by using O(100 s) long stretches of mock data in coincidence with the times of observed QPOs, and by using the known sky location of the source. We analytically derive the PDF of the background distribution and compare to the results obtained by applying the concept to simulated Gaussian noise, as well as off-source playground data collected by the 4-km Hanford detector (H1) during LIGOs fifth science run (S5). We show that the transient glitch rejection and adaptive differential energy comparison methods we apply succeed in rejecting outliers in the S5 background data. Finally, we discuss how to extend the method to a network containing multiple detectors, and as an example, tune the method to maximize sensitivity to SGR 1806-20 flare times.

Infused ice can multiply IceCube’s sensitivity

The IceCube Neutrino Observatory is the world’s largest neutrino detector with a cubic-kilometer instrumented volume at the South Pole. It is preparing for a major upgrade that will significantly increase its sensitivity. A promising technological innovation investigated for this upgrade is wavelength shifting optics. Augmenting sensors with such optics could increase the photo-collection area of IceCube’s digital optical modules, and shift the incoming photons’ wavelength to where these modules are the most sensitive. Here we investigate the use of IceCube’s drill holes as wavelength shifting optics. We calculate the sensitivity enhancement due to increasing the ice’s refractive index in the holes, and infusing wavelength-shifting substrate into the ice. We find that, with adequate wavelength-shifter infusion, every ~0.05 increase in the ice’s refractive index will increase IceCube’s photon sensitivity by 100%, opening the possibility for the substantial, cost-effective expansion of IceCube’s reach.The IceCube Neutrino Observatory has been recording a flux of high-energy cosmic neutrinos since 2013. Here, the authors investigate the possibility of increasing its sensitivity by implementing wavelength shifting optics within IceCube’s drill holes.