A. Chyzh

Two detector arrays for fast neutrons at LANSCE

The neutron spectrum from neutron-induced fission needs to be known in designing new fast reactors, predicting criticality for safety analyses, and developing techniques for global security application. The experimental data base of fission neutron spectra is very incomplete and most present evaluated libraries are based on the approach of the Los Alamos Model. To validate these models and to provide improved data for applications, a program is underway to measure the fission neutron spectrum for a wide range of incident neutron energies using the spallation source of fast neutrons at the Weapons Neutron Research (WNR) facility at the Los Alamos Neutron Science Center (LANSCE). In a double time-of-flight experiment, fission neutrons are detected by arrays of neutron detectors to increase the solid angle and also to investigate possible angular dependence of the fission neutrons. The challenge is to measure the spectrum from low energies, down to 100 keV or so, to energies over 10 MeV, where the evaporation-like spectrum decreases by 3 orders of magnitude from its peak around 1 MeV. For these measurements, we are developing two arrays of neutron detectors, one based on liquid organic scintillators and the other on 6Li-glass detectors. The range of fission neutrons detected by organic liquid scintillators extends from about 600 keV to well over 10 MeV, with the lower limit being defined by the limit of pulse-shape discrimination. The 6Li-glass detectors have a range from very low energies to about 1 MeV, where their efficiency then becomes small. Various considerations and tests are in progress to understand important contributing factors in designing these two arrays and they include selection and characterization of photomultiplier tubes (PM), the performance of relatively thin (1.8 cm) 6Li-glass scintillators on 12.5 cm diameter PM tubes, use of 17.5 cm diameter liquid scintillators with 12.5 cm PM tubes, measurements of detector efficiencies with tagged neutrons from the WNR/LANSCE neutron beam, and efficiency calibration with 252Cf spontaneous fission neutrons. Design considerations and test results are presented.

Development of Neutron Detector Arrays for Neutron-Induced Reaction Measurements

The outgoing neutron energy spectra from neutron-induced fission of various actinides are important for basic understanding of the fission process near the scission point as well as playing a large role in neutron transport codes, which are heavily relied upon in the design of advanced nuclear reactors and simulations of critical assemblies. The reliability of the results of neutron transport models is a strong function of the quality of the nuclear data used as input. Currently, the worlds experimental database of fission neutron spectra is severely incomplete (especially for higher incident neutron energies) with large uncertainties in key portions of the outgoing energy spectra. Many transport codes use evaluated data libraries, which are based on the approach of the Los Alamos model. Other theoretical models have been developed, but the available data cannot distinguish the results of different models (as is the case for 239Pu). Better measurements are needed for all incident and outgoing neutron energies, but most urgently in the low-energy (below 1 MeV) and high-energy (above 6 MeV) portions of the outgoing spectra where theoretical model results differ greatly. We present the design considerations (and some characterization results) of the two Chi-Nu neutron detector arrays: one array of 6Li-glass detectors and one array of liquid-scintillator detectors. These detector arrays are being constructed to meet the challenge of measuring the prompt fission neutron spectra (for a few common actinides) to a higher accuracy and precision than achieved previously and over a larger incident energy range than has been covered by previous experimenters. We see a significant reduction in neutron-scattering backgrounds with our new array designs.