A. N. Ishchenko

Intrusion features of a high-speed striker of a porous tungsten-based alloy with a strengthening filler in a steel barrier

The complex problem of increasing the penetrating power of strikers based on highly porous tungsten composites is considered by improving their strengthening properties by alloying the hardening components under high-speed collision conditions. Using the method of liquid-phase sintering, we fabricated samples of strikers based on a porous WNiFeCo alloy (tungsten + nickel + iron + cobalt), alloyed with tungsten carbide with cobalt (WCCo8) and titanium-tungsten carbide (TiWC). Dynamic tests of the strikers from the developed alloys were carried out at the collision velocity with a steel barrier of the order of 2800 m/s. The penetration depth of the striker based on a porous WNiFeCo alloy doped with tungsten carbides is 30% higher than the penetration depth of a striker of a monolithic WNiFe-90 alloy (tungsten + nickel + iron with a tungsten content of 90%).

Synthesis of Two-Layer Metal–Ceramic Materials with High-Velocity-Impact Resistance Based on Refractory Compounds and Titanium

We consider the possibility of obtaining composites with increased mechanical strength resistant to high-velocity impact by means of self-propagating high-temperature synthesis (SHS) of metal–ceramic materials with graded composition–in particular, of layered type. A two-layer combined metal–ceramic material has been developed comprising NiTi-bonded titanium diboride (TiB2) layer on a metallic titanium substrate layer. The impact resistance of this composite is advantageous to that of a homogeneous titanium plate, which is manifested by the absence of a spall crater upon the impact of a spherical steel projectile and by stronger deformation and prefracture cracking of the projectile.

Development and Investigation of a Two-Layer Metal—Ceramic Material for Protective Barriers in Conditions of High-Speed Impact

The possibility of improving the physico-mechanical characteristics of composite materials used in protective structures against a high-speed impact is considered. By means of self-propagating high-temperature synthesis, a two-layer cermet is obtained: the front layer is a cermet based on titanium diboride with a titanium nickelide bond, and the back layer is a titanium alloy. The study by the computational-experimental method of the impact resistance of this composite in comparison with a homogeneous titanium plate showed a qualitative advantage expressed in the absence of a shock crater in a cermet plate after a collision with a steel spherical impactor and stronger deformation and prefracture of the impactor. The two-layer cermet has a high resistance to the penetration of the steel impactor.

Charging conditions research to increase the initial projected velocity at different initial charge temperatures

The problems of the defense industry occupy the most important place in the constantly developing modern world. The daily development of defense technology does not stop, nor do studies on internal ballistics. The scientists of the whole world are faced with the task of managing the main characteristics of a ballistic experiment. The main characteristics of the ballistic experiment are the maximum pressure in the combustion chamber Pmax and the projected velocity at the time of barrel leaving UM. During the work the combustion law of the new high-energy fuel was determined in a ballistic experiment for different initial temperatures. This combustion law was used for a parametric study of depending Pmax and UM from a powder charge mass and a traveling charge was carried out. The optimal conditions for loading were obtained for improving the initial velocity at pressures up to 600 MPa for different initial temperatures. In this paper, one of the most promising schemes of throwing is considered, as well as a method for increasing the muzzle velocity of a projected element to 3317 m/s.The problems of the defense industry occupy the most important place in the constantly developing modern world. The daily development of defense technology does not stop, nor do studies on internal ballistics. The scientists of the whole world are faced with the task of managing the main characteristics of a ballistic experiment. The main characteristics of the ballistic experiment are the maximum pressure in the combustion chamber Pmax and the projected velocity at the time of barrel leaving UM. During the work the combustion law of the new high-energy fuel was determined in a ballistic experiment for different initial temperatures. This combustion law was used for a parametric study of depending Pmax and UM from a powder charge mass and a traveling charge was carried out. The optimal conditions for loading were obtained for improving the initial velocity at pressures up to 600 MPa for different initial temperatures. In this paper, one of the most promising schemes of throwing is considered, as well as a...

Simulation of high-speed interaction between impactor and layered-spaced design involving explosive

In this paper we present calculating and experimental study of high-speed interaction between explosive content, protected by layered-spaced design, and the cermet impactor in wide speed range. An experimental technique and mathematical model of during the behavior of explosives, protected by layer-spaced design, by with high-speed impact. The process of the interaction between the cermet impactor and element of the protective design is customized and depends on the materials of the interacting bodies, the speed and angle of impact.

Prediction of the consequences of a high-velocity collision between meteoric particles and elements of a titanium alloy protective structure

Calculation-experimental studies of a high-velocity collision between VT1-0 titanium plates and ultrafine- and coarse-grained structures with a steel spherical impactor are illustrated. Fine-grained VT1-0 titanium plate samples have been obtained using the abc pressing method. Ballistic measurements have been performed using a 30-mm smooth-bore ballistic installation at velocities of about 2500 m/s. A high-velocity collision has been calculated in the scope of an elastoplastic model of interacting materials with regard to destruction and a different phase state at velocities reaching 15 km/s. It has been indicated that the mechanical properties of the VT1-0 alloy are improved when proceeding from a coarse-grained structure to an ultrafine- grained structure; however, in this case, the result of shock loading is hardly affected in the considered velocity range. Titanium plates can be used as screens to protect the main structure of the aircraft from a high-velocity collision.

Calculation and experimental study on high-speed impact of heat-resistant coating materials with a meteoric particle

The given article presents the conducted calculation and experimental study on destruction of heat-resistant coating material of an aircraft in the process of high-speed interaction of the steel spherical projectile. The projectile is imitating a meteoric particle. The study was conducted in the wide range of velocities. The mathematical behavioral model of heat-resistant coating under high-speed impact was developed. The interaction of ameteoric particle with an element of the protective structure has especially individual character and depends on impact velocity and angle, materials of the interacting solids.