V. V. Burkin

Intrusion features of a high-speed striker of a porous tungsten-based alloy with a strengthening filler in a steel barrier

The complex problem of increasing the penetrating power of strikers based on highly porous tungsten composites is considered by improving their strengthening properties by alloying the hardening components under high-speed collision conditions. Using the method of liquid-phase sintering, we fabricated samples of strikers based on a porous WNiFeCo alloy (tungsten + nickel + iron + cobalt), alloyed with tungsten carbide with cobalt (WCCo8) and titanium-tungsten carbide (TiWC). Dynamic tests of the strikers from the developed alloys were carried out at the collision velocity with a steel barrier of the order of 2800 m/s. The penetration depth of the striker based on a porous WNiFeCo alloy doped with tungsten carbides is 30% higher than the penetration depth of a striker of a monolithic WNiFe-90 alloy (tungsten + nickel + iron with a tungsten content of 90%).

Synthesis of Two-Layer Metal–Ceramic Materials with High-Velocity-Impact Resistance Based on Refractory Compounds and Titanium

We consider the possibility of obtaining composites with increased mechanical strength resistant to high-velocity impact by means of self-propagating high-temperature synthesis (SHS) of metal–ceramic materials with graded composition–in particular, of layered type. A two-layer combined metal–ceramic material has been developed comprising NiTi-bonded titanium diboride (TiB2) layer on a metallic titanium substrate layer. The impact resistance of this composite is advantageous to that of a homogeneous titanium plate, which is manifested by the absence of a spall crater upon the impact of a spherical steel projectile and by stronger deformation and prefracture cracking of the projectile.

Development and Investigation of a Two-Layer Metal—Ceramic Material for Protective Barriers in Conditions of High-Speed Impact

The possibility of improving the physico-mechanical characteristics of composite materials used in protective structures against a high-speed impact is considered. By means of self-propagating high-temperature synthesis, a two-layer cermet is obtained: the front layer is a cermet based on titanium diboride with a titanium nickelide bond, and the back layer is a titanium alloy. The study by the computational-experimental method of the impact resistance of this composite in comparison with a homogeneous titanium plate showed a qualitative advantage expressed in the absence of a shock crater in a cermet plate after a collision with a steel spherical impactor and stronger deformation and prefracture of the impactor. The two-layer cermet has a high resistance to the penetration of the steel impactor.

Prediction of the consequences of a high-velocity collision between meteoric particles and elements of a titanium alloy protective structure

Calculation-experimental studies of a high-velocity collision between VT1-0 titanium plates and ultrafine- and coarse-grained structures with a steel spherical impactor are illustrated. Fine-grained VT1-0 titanium plate samples have been obtained using the abc pressing method. Ballistic measurements have been performed using a 30-mm smooth-bore ballistic installation at velocities of about 2500 m/s. A high-velocity collision has been calculated in the scope of an elastoplastic model of interacting materials with regard to destruction and a different phase state at velocities reaching 15 km/s. It has been indicated that the mechanical properties of the VT1-0 alloy are improved when proceeding from a coarse-grained structure to an ultrafine- grained structure; however, in this case, the result of shock loading is hardly affected in the considered velocity range. Titanium plates can be used as screens to protect the main structure of the aircraft from a high-velocity collision.

High-speed impact of the metal projectile on the barrier containing porous corundum-based ceramics with chemically active filler

The paper presents a calculation-experimental study on high-speed interaction of the metal projectile with a combined barrier made of porous corundum-based ceramics filled with chemically active composition (sulfur, nitrate of potash) in the wide range of speeds. A mathematical behavior model of porous corundum-based ceramics with chemically active filler is developed within the scope of mechanics of continuous media taking into account the energy embedding from a possible chemical reaction between a projectile metal and filler at high-speed impact. Essential embedding of inlet heat is not observed in the considered range of impact speeds (2.5 … 8 km/s).