Abhinav Malasi

Oxidation-resistant silver nanostructures for ultrastable plasmonic applications.

Reduced degradation (oxidation) of silver nanoparticles (NPs) is achieved by contacting Ag with immiscible Co NPs. The relative decay of the plasmon peak (plot) shows that pure Ag NPs (blue dashed curve) decay by 25% in ca 20 days, whereas AgCo NPs last about 10 times longer, requiring nearly five months for a similar decay (red solid curve). The TEM images for both Ag and AgCo were taken after 50 days of storage under ambient conditions.

Ferroplasmons: Intense Localized Surface Plasmons in Metal-Ferromagnetic Nanoparticles

Interaction of photons with matter at length scales far below their wavelengths has given rise to many novel phenomena, including localized surface plasmon resonance (LSPR). However, LSPR with narrow bandwidth (BW) is observed only in a select few noble metals, and ferromagnets are not among them. Here, we report the discovery of LSPR in ferromagnetic Co and CoFe alloy (8% Fe) in contact with Ag in the form of bimetallic nanoparticles prepared by pulsed laser dewetting. These plasmons in metal-ferromagnetic nanostructures, or ferroplasmons (FP) for short, are in the visible spectrum with comparable intensity and BW to those of the LSPRs from the Ag regions. This finding was enabled by electron energy-loss mapping across individual nanoparticles in a monochromated scanning transmission electron microscope. The appearance of the FP is likely due to plasmonic interaction between the contacting Ag and Co nanoparticles. Since there is no previous evidence for materials that simultaneously show ferromagnetism and such intense LSPRs, this discovery may lead to the design of improved plasmonic materials and applications. It also demonstrates that materials with interesting plasmonic properties can be synthesized using bimetallic nanostructures in contact with each other.

From Mie to Fresnel through effective medium approximation with multipole contributions

The Mie theory gives the exact solution to scattering from spherical particles while the Fresnel theory provides the solution to optical behavior of multilayer thin film structures. Often, the bridge between the two theories to explain the behavior of materials such as nanoparticles in a host dielectric matrix, is done by effective medium approximation (EMA) models which exclusively rely on the dipolar response of the scattering objects. Here, we present a way to capture multipole effects using EMA. The effective complex dielectric function of the composite is derived using the Clausius–Mossotti relation and the multipole coefficients of the approximate Mie theory. The optical density (OD) of the dielectric slab is then calculated using the Fresnel approach. We have applied the resulting equation to predict the particle size dependent dipole and quadrupole behavior for spherical Ag nanoparticles embedded in glass matrix. This dielectric function contains the relevant properties of EMA and at the same time predicts the multipole contributions present in the single particle Mie model.

Localized surface plasmon sensing based investigation of nanoscale metal oxidation kinetics

The localized surface plasmon resonance (LSPR) of nanoparticles can be a powerful and sensitive probe of chemical changes in nanoscale volumes. Here we have used the LSPR of silver (Ag) to study the oxidation kinetics of nanoscopic volumes of cobalt (Co) metal. Bimetal nanoparticles of the immiscible Co-Ag system prepared by pulsed laser dewetting were aged in ambient air and the resulting changes to the LSPR signal and bandwidth were used to probe the oxidation kinetics. Co was found to preferentially oxidize first. This resulted in a significant enhancement by a factor of 8 or more in the lifetime of stable Ag plasmons over that of pure Ag. Theoretical modeling based on optical mean field approximation was able to predict the oxidation lifetimes and could help design stable Ag-based plasmonic nanoparticles for sensing applications.

Enhanced and tunable optical quantum efficiencies from plasmon bandwidth engineering in bimetallic CoAg nanoparticles

Plasmonic nanoparticles are amongst the most effective ways to resonantly couple optical energy into and out of nanometer sized volumes. However, controlling and/or tuning the transfer of this incident energy to the surrounding near and far field is one of the most interesting challenges in this area. Due to the dielectric properties of metallic silver (Ag), its nanoparticles have amongst the highest radiative quantum efficiencies (η), i.e., the ability to radiatively transfer the incident energy to the surrounding. Here we report the discovery that bimetallic nanoparticles of Ag made with immiscible and plasmonically weak Co metal can show comparable and/or even higher η values. The enhancement is a result of the narrowing of the plasmon bandwidth from these bimetal systems. The phenomenological explanation of this effect based on the dipolar approximation points to the reduction in radiative losses within the Ag nanoparticles when in contact with cobalt. This is also supported by a model of coupling bet...

Cobalt stabilization of silver extraordinary optical transmission sensing platforms

Plasmon-mediated extraordinary optical transmission (EOT) is finding increased interest for biosensing applications. While Ag nanostructures are capable of the highest plasmonic quality factor of all metals, the performance reliability of pure Ag EOT devices is limited by degradation through environmental interactions. Here we show that EOT devices consisting of nanostructured hole arrays in Ag/Co bilayers show comparable transmission with that of identical hole arrays in Ag thin films as well as enhanced reliability measured by the rate of resonance peak redshift and broadening with time. The Ag/Co EOT devices showed 2.6× and 1.9× smaller red shift in short timescales (20 days) and after 100 days, respectively, while they showed a 1.7× steady-state decrease in rate of bandwidth broadening. This improvement is likely due to the Co metal stabilizing the Ag film from morphological changes by reducing its propensity to diffuse or dewet on the underlying substrate. The improved reliability of Ag/Co bilayer EO...

Novel Iron-based ternary amorphous oxide semiconductor with very high transparency, electronic conductivity, and mobility

Here we report that ternary metal oxides of type (Me)2O3 with the primary metal (Me) constituent being Fe (66 atomic (at.) %) along with the two Lanthanide elements Tb (10 at.%) and Dy (24 at.%) can show excellent semiconducting transport properties. Thin films prepared by pulsed laser deposition at room temperature followed by ambient oxidation showed very high electronic conductivity (>5 × 104 S/m) and Hall mobility (>30 cm2/V-s). These films had an amorphous microstructure which was stable to at least 500 °C and large optical transparency with a direct band gap of 2.85 ± 0.14 eV. This material shows emergent semiconducting behavior with significantly higher conductivity and mobility than the constituent insulating oxides. Since these results demonstrate a new way to modify the behaviors of transition metal oxides made from unfilled d- and/or f-subshells, a new class of functional transparent conducting oxide materials could be envisioned.

Ferroplasmons: Novel Plasmons in Metal-Ferromagnetic Bimetallic Nanostructures

1Department of Material Science and Engineering, University of Tennessee, Knoxville, Tennessee 37996, USA 2Department of Chemical and Biomolecular Engineering, University of Tennessee, Knoxville, Tennessee, 37996, USA 3INFIQC, Departamento de Fisicoquímica, Facultad de Ciencias Químicas, Departamento de Fisicoquímica, Universidad Nacional de Córdoba, Córdoba 5000, Argentina 4Material Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831, USA