Ah Ra Kim

Charge-transfer-based Gas Sensing Using Atomic-layer MoS2

Two-dimensional (2D) molybdenum disulphide (MoS2) atomic layers have a strong potential to be used as 2D electronic sensor components. However, intrinsic synthesis challenges have made this task difficult. In addition, the detection mechanisms for gas molecules are not fully understood. Here, we report a high-performance gas sensor constructed using atomic-layered MoS2 synthesised by chemical vapour deposition (CVD). A highly sensitive and selective gas sensor based on the CVD-synthesised MoS2 was developed. In situ photoluminescence characterisation revealed the charge transfer mechanism between the gas molecules and MoS2, which was validated by theoretical calculations. First-principles density functional theory calculations indicated that NO2 and NH3 molecules have negative adsorption energies (i.e., the adsorption processes are exothermic). Thus, NO2 and NH3 molecules are likely to adsorb onto the surface of the MoS2. The in situ PL characterisation of the changes in the peaks corresponding to charged trions and neutral excitons via gas adsorption processes was used to elucidate the mechanisms of charge transfer between the MoS2 and the gas molecules.

Chemical Sensing of 2D Graphene/MoS2 Heterostructure device

We report the production of a two-dimensional (2D) heterostructured gas sensor. The gas-sensing characteristics of exfoliated molybdenum disulfide (MoS2) connected to interdigitated metal electrodes were investigated. The MoS2 flake-based sensor detected a NO2 concentration as low as 1.2 ppm and exhibited excellent gas-sensing stability. Instead of metal electrodes, patterned graphene was used for charge collection in the MoS2-based sensing devices. An equation based on variable resistance terms was used to describe the sensing mechanism of the graphene/MoS2 device. Furthermore, the gas response characteristics of the heterostructured device on a flexible substrate were retained without serious performance degradation, even under mechanical deformation. This novel sensing structure based on a 2D heterostructure promises to provide a simple route to an essential sensing platform for wearable electronics.

Graphene-based gas sensor: metal decoration effect and application to a flexible device

Roles of metal nanoparticles (NPs) on graphene-based devices were investigated in terms of gas-sensing characteristics of NO2 and NH3, and flexible gas sensing was also realized for future applications. The synergistic combination of metal NPs and graphene modulates the electronic properties of graphene, leading to enhancement of selectivity and sensitivity in gas-sensing characteristics. Introduction of palladium (Pd) NPs on the graphene accumulates hole carriers of graphene, resulting in the gas sensor being sensitized by NH3 gas molecular adsorption. In contrast, aluminum (Al) NPs deplete hole carriers, which dramatically improves NO2 sensitivity. Furthermore, the sensitivity of flexible graphene-based gas sensors was also enhanced via the same approach, even after 104 bending cycles and was maintained after 3 months.

Bifunctional sensing characteristics of chemical vapor deposition synthesized atomic-layered MoS2

Two-dimensional (2D) molybdenum disulfide (MoS2) atomic layers have a strong potential to be adopted for 2D electronic components due to extraordinary and novel properties not available in their bulk foams. Unique properties of the MoS2, including quasi-2D crystallinity, ultrahigh surface-to-volume, and a high absorption coefficient, have enabled high-performance sensor applications. However, implementation of only a single-functional sensor presents a limitation for various advanced multifunctional sensor applications within a single device. Here, we demonstrate the charge-transfer-based sensitive (detection of 120 ppb of NO2) and selective gas-sensing capability of the chemical vapor deposition synthesized MoS2 and good photosensing characteristics, including moderate photoresponsivity (∼71 mA/W), reliable photoresponse, and rapid photoswitching (<500 ms). A bifunctional sensor within a single MoS2 device to detect photons and gas molecules in sequence is finally demonstrated, paving a way toward a versatile sensing platform for a futuristic multifunctional sensor.

Alloyed 2D Metal-Semiconductor Atomic Layer Junctions.

Heterostructures of compositionally and electronically variant two-dimensional (2D) atomic layers are viable building blocks for ultrathin optoelectronic devices. We show that the composition of interfacial transition region between semiconducting WSe2 atomic layer channels and metallic NbSe2 contact layers can be engineered through interfacial doping with Nb atoms. WxNb1-xSe2 interfacial regions considerably lower the potential barrier height of the junction, significantly improving the performance of the corresponding WSe2-based field-effect transistor devices. The creation of such alloyed 2D junctions between dissimilar atomic layer domains could be the most important factor in controlling the electronic properties of 2D junctions and the design and fabrication of 2D atomic layer devices.

Two-Dimensional Atomic-Layered Alloy Junctions for High-Performance Wearable Chemical Sensor.

We first report that two-dimensional (2D) metal (NbSe2)-semiconductor (WSe2)-based flexible, wearable, and launderable gas sensors can be prepared through simple one-step chemical vapor deposition of prepatterned WO3 and Nb2O5. Compared to a control device with a Au/WSe2 junction, gas-sensing performance of the 2D NbSe2/WSe2 device was significantly enhanced, which might have resulted from the formation of a NbxW1-xSe2 transition alloy junction lowering the Schottky barrier height. This would make it easier to collect charges of channels induced by molecule adsorption, improving gas response characteristics toward chemical species including NO2 and NH3. 2D NbSe2/WSe2 devices on a flexible substrate provide gas-sensing properties with excellent durability under harsh bending. Furthermore, the device stitched on a T-shirt still performed well even after conventional cleaning with a laundry machine, enabling wearable and launderable chemical sensors. These results could pave a road toward futuristic gas-sensing platforms based on only 2D materials.

Effect of Nb Doping on Chemical Sensing Performance of Two-Dimensional Layered MoSe2

Here, we report that Nb doping of two-dimensional (2D) MoSe2 layered nanomaterials is a promising approach to improve their gas sensing performance. In this study, Nb atoms were incorporated into a 2D MoSe2 host matrix, and the Nb doping concentration could be precisely controlled by varying the number of Nb2O5 deposition cycles in the plasma enhanced atomic layer deposition process. At relatively low Nb dopant concentrations, MoSe2 showed enhanced device durability as well as NO2 gas response, attributed to its small grains and stabilized grain boundaries. Meanwhile, an increase in the Nb doping concentration deteriorated the NO2 gas response. This might be attributed to a considerable increase in the number of metallic NbSe2 regions, which do not respond to gas molecules. This novel method of doping 2D transition metal dichalcogenide-based nanomaterials with metal atoms is a promising approach to improve the performance such as stability and gas response of 2D gas sensors.

Metal Decoration Effects on the Gas-Sensing Properties of 2D Hybrid-Structures on Flexible Substrates.

We have investigated the effects of metal decoration on the gas-sensing properties of a device with two-dimensional (2D) molybdenum disulfide (MoS2) flake channels and graphene electrodes. The 2D hybrid-structure device sensitively detected NO2 gas molecules (>1.2 ppm) as well as NH3 (>10 ppm). Metal nanoparticles (NPs) could tune the electronic properties of the 2D graphene/MoS2 device, increasing sensitivity to a specific gas molecule. For instance, palladium NPs accumulate hole carriers of graphene/MoS2, electronically sensitizing NH3 gas molecules. Contrarily, aluminum NPs deplete hole carriers, enhancing NO2 sensitivity. The synergistic combination of metal NPs and 2D hybrid layers could be also applied to a flexible gas sensor. There was no serious degradation in the sensing performance of metal-decorated MoS2 flexible devices before/after 5000 bending cycles. Thus, highly sensitive and endurable gas sensor could be achieved through the metal-decorated 2D hybrid-structure, offering a useful route to wearable electronic sensing platforms.

Alloyed 2D Metal–Semiconductor Heterojunctions: Origin of Interface States Reduction and Schottky Barrier Lowering

The long-term stability and superior device reliability through the use of delicately designed metal contacts with two-dimensional (2D) atomic-scale semiconductors are considered one of the critical issues related to practical 2D-based electronic components. Here, we investigate the origin of the improved contact properties of alloyed 2D metal-semiconductor heterojunctions. 2D WSe2-based transistors with mixed transition layers containing van der Waals (M-vdW, NbSe2/WxNb1-xSe2/WSe2) junctions realize atomically sharp interfaces, exhibiting long hot-carrier lifetimes of approximately 75,296 s (78 times longer than that of metal-semiconductor, Pd/WSe2 junctions). Such dramatic lifetime enhancement in M-vdW-junctioned devices is attributed to the synergistic effects arising from the significant reduction in the number of defects and the Schottky barrier lowering at the interface. Formation of a controllable mixed-composition alloyed layer on the 2D active channel would be a breakthrough approach to maximize the electrical reliability of 2D nanomaterial-based electronic applications.

Electrohydrodynamic printing for scalable MoS2 flake coating: application to gas sensing device

Scalable sub-micrometer molybdenum disulfide ([Formula: see text]) flake films with highly uniform coverage were created using a systematic approach. An electrohydrodynamic (EHD) printing process realized a remarkably uniform distribution of exfoliated [Formula: see text] flakes on desired substrates. In combination with a fast evaporating dispersion medium and an optimal choice of operating parameters, the EHD printing can produce a film rapidly on a substrate without excessive agglomeration or cluster formation, which can be problems in previously reported liquid-based continuous film methods. The printing of exfoliated [Formula: see text] flakes enabled the fabrication of a gas sensor with high performance and reproducibility for [Formula: see text] and [Formula: see text].