Alejandro Fainstein

Wired-Enzyme Core-Shell Au Nanoparticle Biosensor

We report a fully integrated core-shell nanoparticle system responsive to glucose. The system is comprised of self-assembled glucose oxidase and an osmium molecular wire on core-shell Au nanoparticles. Characterization of the functional nanoparticles by spectroscopy, quartz crystal microbalance and electrochemical techniques has shown that the catalytically active shell has a structure as designed and all components are active in the self-assembled multilayer shell. Furthermore, amperometric reagentless detection of glucose and contactless photonic biosensing by the Os(II) resonant Raman signal have been demonstrated. The enzymatic reduction of FAD by glucose and further reduction of the Raman silent Os(III) by FADH 2 yields a characteristic enzyme-substrate calibration curve in the millimolar range. Furthermore, coupling of electronic resonant Raman of the osmium complex with the SERS amplification by Au NPs plasmon resonance has been demonstrated which leads to an extra enhancement of the biosensor signal. We present a proof of concept extending the work done with planar surfaces to core-shell NPs as an advance in the design of glucose-responsive chemistry detected by SERS-like methods.

Quantitative electrochemical SERS of flavin at a structured silver surface.

In situ electrochemical surface enhanced Raman spectra (SERS) for an immobilized monolayer of a flavin analogue (isoalloxazine) at nanostructured silver surfaces are reported. Unique in the present study, the flavin is not directly adsorbed at the Ag surface but is attached through a chemical reaction between cysteamine adsorbed on the Ag surface and methylformylisoalloxazine. Even though the flavin is held away from direct contact with the metal, strong surface enhancements are observed. The nanostructured silver surfaces are produced by electrodeposition through colloidal templates to produce thin (<1 microm) films containing close-packed hexagonal arrays of uniform 900 nm sphere segment voids. The sphere segment void (SSV) structured silver surfaces are shown to be ideally suited to in situ electrochemical SERS studies at 633 nm, giving stable, reproducible surface enhancements at a range of electrode potentials, and we show that the SER spectra are sensitive to subfemtomole quantities of immobilized flavin. Studies of the SER spectra as a function of the electrode potential show clear evidence for the formation of the flavin semiquinone at the electrode surface at cathodic potentials.

Strong Correlation between Molecular Configurations and Charge- Transfer Processes Probed at the Single-Molecule Level by Surface- Enhanced Raman Scattering

Single-molecule (SM) electrochemistry studied by surface-enhanced Raman scattering (SERS) with high spectral resolution reveals a picture in which the frequency of Raman modes is correlated with the electrochemical process through the interaction with the surface. Previously unexplored phenomena can be revealed by the synergy of electrochemistry and SM-SERS, which explores in this case subtler spectroscopic aspects (like the frequency of a vibration within the inhomogeneous broadening of a many-molecules Raman peak) to gain the information. We demonstrate, among other things, that the interaction with the surface is correlated both with the molecule vibrational frequencies and with the ability of single molecules to be reduced/oxidized at different potentials along the electrochemical cycle. Qualitative models of the interaction of molecules with surfaces are also touched upon.

Silver Nanoparticle-Mesoporous Oxide Nanocomposite Thin Films: A Platform for Spatially Homogeneous SERS-Active Substrates with Enhanced Stability

We introduce a nanoparticle-mesoporous oxide thin film composite (NP-MOTF) as low-cost and straightforward sensing platforms for surface-enhanced Raman Spectroscopy (SERS). Titania, zirconia, and silica mesoporous matrices templated with Pluronics F-127 were synthesized via evaporation-induced self-assembly and loaded with homogeneously dispersed Ag nanoparticles by soft reduction or photoreduction. Both methods give rise to uniform and reproducible Raman signals using 4-mercaptopyridine as a probe molecule. Details on stability and reproducibility of the Raman enhancement are discussed. Extensions in the design of these composite structures were explored including detection of nonthiolated molecules, such as rhodamine 6-G or salicylic acid, patterning techniques for locating the enhancement regions and bilayered mesoporous structures to provide additional control on the environment, and potential size-selective filtration. These inorganic oxide-metal composites stand as extremely simple, reproducible, and versatile platforms for Raman spectroscopy analysis.

From single to multiple Ag-layer modification of Au nanocavity substrates: a tunable probe of the chemical surface-enhanced Raman scattering mechanism.

We present experimental and computational results that enlighten the mechanisms underlying the chemical contribution to surface-enhanced Raman scattering (SERS). Gold void metallic arrays electrochemically covered either by a Ag monolayer or 10-100 Ag layers were modified with a self-assembled monolayer of 4-mercaptopyridine as a molecular Raman probe displaying a rich and unexpected Raman response. A resonant increase of the Raman intensity in the red part of the spectrum is observed that cannot be related to plasmon excitations of the cavity-array. Notably, we find an additional 10-20 time increase of the SERS amplification upon deposition of a single Ag layer on the Au substrate, which is, however, almost quenched upon deposition of 10 atomic layers. Further deposition of 100 atomic Ag layers results in a new increase of the SERS signal, consistent with the improved plasmonic efficiency of Ag bulk-like structures. The SERS response as a function of the Ag layer thickness is analyzed in terms of ab initio calculations and a microscopic model for the SERS chemical mechanism based on a resonant charge transfer process between the molecular HOMO state and the Fermi level in the metal surface. We find that a rearrangement of the electronic charge density related to the presence of the Ag monolayer in the Au/Ag/molecule complex causes an increase in the distance between the HOMO center of charge and the metallic image plane that is responsible for the variation of Raman enhancement between the studied substrates. Our results provide a general platform for studying the chemical contribution to SERS, and for enhancing the Raman efficiency of tailored Au-SERS templates through electrochemical modification with Ag films.

Redox molecule based SERS sensors

We describe a general framework to design nanobiosensors based on a wired enzyme coupled to a redox molecule and integrated with SERS Au core-shell nanoparticles and ordered nanocavities. The response of the proposed sensor is based on the different electronic resonant Raman behavior of the oxidized or reduced electronic states of the molecular wire, and on the surface plasmon amplification induced by the tailored metallic substrate. The nanobiosensors can be interrogated remotely through the resonant Raman scattering intensity recovery or spectral variation of the redox molecule, an Os-complex, when the latter varies its oxidation state. Alternatively, we show through two-color spectro-electrochemistry that Raman scattering is also finely sensitive to oxidation state changes of flavin, a biomimetic system that mimics the active center of many flavoprotein enzymes. We show that multiple sample spectroscopic ellipsometry gives access to the spectral dependence of the optical constants of single redox-molecule layers, and through it to the electronic resonances of the system. All the components for selective molecular recognition and for the generation of an optical amplified signal, are self-contained in the proposed biosensor. As proof of concept a compact SERS sensor responsive to glucose with millimolar concentration in solution is demonstrated.

Critical coupling to Tamm plasmons

The conditions of critical coupling of light to Tamm plasmons are investigated with comprehensive numerical simulations, highlighting the parameters that maximise absorption of incident light in the metal layer. The asymmetric response in reflection and absorption with respect to the direction of incidence is discussed, the two cases yielding different optimal coupling conditions. These findings are relevant for the design of optimised Tamm structures, particularly in applications such as narrow-band thermal emitters, field-enhanced spectroscopy and refractive-index sensing.

Phospholipid Bilayers Supported on Thiolate-Covered Nanostructured Gold: In Situ Raman Spectroscopy and Electrochemistry of Redox Species

Thiol-covered nanostructured gold has been tested as a platform for the preparation of high-area phospholipid bilayer systems suitable for optical and electrochemical sensing. In situ and ex situ Raman spectroscopy and electrochemical measurements are made to study methylene blue (MB) and flavin-adenine dinucleotide (FAD) incorporation into dimyristoylphosphatidylcholine (DMPC) bilayers prepared by vesicle fusion on dithiothreitol (DTT)-covered nanostructured gold. Results show that lipophilic positively charged MB molecules are incorporated in the bilayer reaching the DTT-gold interface. On the other hand, the negatively charged FAD molecules are immobilized at the outer part of the phospholipid bilayer and cannot be electrochemically detected. Our results demonstrate that DTT-covered nanostructured gold provides a suitable high-area platform for phospholipid membranes that are able to separate and sense different kinds of molecules and biomolecules.

Spatial Distribution of Optical Near-Fields in Plasmonic Gold Sphere Segment Voids

We present a comprehensive experimental and computational study on the electromagnetic field distribution in sphere segment void arrays. Surface plasmon polaritons can be excited in these void arrays, resulting in greatly enhanced electromagnetic fields. With the scanning near-field optical microscope (SNOM) we are able to measure the electromagnetic field distribution at the sample surface. For this purpose, an array of relatively large voids with a sphere diameter of 900 nm was fabricated, allowing for an easy access of the scanning glass-fibre tip and yielding very detailed scans. Complementary, finite-difference time-domain (FDTD) calculations on a complete void array have been performed and compared with the SNOM intensity maps and experimental reflectivity data. We show in a direct way both the existence of extended and localised modes in the Au void array for three different void depths. We also show and discuss the changes that the modes undergo for the different void depths and excitation wavelengths. Moreover, since the simulations were performed for two different void geometries, one containing perfectly spherical void surfaces and another more realistic one, which considers the presence of interstitial wall holes and other imperfections, as observed in scanning electron micrographs, we were able to determine by comparison with the experiment under which conditions an array of idealised sphere segment voids is a meaningful model. This demonstrates that both SNOM and FDTD simulations are powerful tools for understanding the plasmonic response of metallic nanostructures, thus enabling, for instance, a design for applications in ultra-sensitive optical detection.

SPR Biosensing MUA/Poly-L-lysine Platform for the Detection of 2,4-Dinitrophenol as Small Molecule Model System

Surface Plasmon Resonance assays are being developed as alternative biodetection methods for a great number of pesticides and toxins. These substances typically have low molecular weight, making it necessary to perform competitive inhibition immunoassays. In most of the cases, the strategy is to immobilize a protein derivative of the analyte, which usually involves the appearance of nonspecific protein binding which limits the detection range of the assay. In this work we present results of a poly-L-lysine Au-MUA-PLL based sensor platform for quantitative determination of 2,4-dinitrophenol as model system for small molecular weight substances detection. The prepared sensor chip was characterized by means of Atomic Force Microscopy, Surface Plasmon Resonance, and Surface Enhanced Raman Spectroscopy. Experiments verified the absence of nonspecific protein adsorption to Au-MUA-PLL surfaces and the improvement of the competitive inhibition assays performance in comparison with single and mixed thiol self-assembled monolayers. The possibility of directly immobilizing 2,4-dinitrophenol to the poly-L-lysine containing platforms leads to an improvement in the detection of the soluble analyte by the competitive inhibition assay avoiding undesirable nonspecific protein adsorption. Therefore, Au-MUA-PLL surfaces constitute a suitable alternative for quantitative detection of small molecules when nonspecific adsorption cannot be avoided.