Alexander Birke

Polypeptoid-block-polypeptide Copolymers: Synthesis, Characterization, and Application of Amphiphilic Block Copolypept(o)ides in Drug Formulations and Miniemulsion Techniques

We report the synthesis of polysarcosine-block-polyglutamic acid benzylester (PSar-block-PGlu(OBn)) and polysarcosine-block-polylysine-ε-N-benzyloxycarbonyl (PSar-block-PLys(Z)) copolymers. The novel polypeptoid-block-polypeptide copolymers (Copolypept(o)ides) have been synthesized by ring-opening polymerization (ROP) of N-carboxyanhydrides (NCAs). Polymerization conditions were optimized regarding protecting groups, block sequence and length. While the degree of polymerization of the PSar block length was set to be around 200 or 400, PGlu(OBn) and PLys(Z) block lengths were varied between 20 to 75. The obtained block copolymers had a total degree of polymerization of 220-475 and dispersity indices between 1.1 and 1.2. Having ensured a nontoxic behavior up to a concentration of 3 mg/mL in HEK293 cells, the novel block copolymers have been applied to the synthesis of organic colloids (by miniemulsion polymerization and miniemulsion solvent evaporation process). Colloids of around 100 nm (miniemulsion polymerization) to 200 nm (miniemulsion process) have been prepared. Additionally, PSar-block-PGlu(OBn) copolymers have been used in a drug formulation of an adenylate cyclase inhibitor. Micelles of 28.0 nm (without drug) and 33.0 nm (with drug) diameter have been observed by fluorescence correlation spectroscopy (FCS). The polypeptoid-block-polypeptide formulation increased solubility of the drug and enhances its bioavailability, which leads to a reduction of intracellular cAMP levels in MaMel 91 melanoma cells.

Introducing PeptoPlexes: polylysine-block-polysarcosine based polyplexes for transfection of HEK 293T cells.

A series of well-defined polypeptide-polypeptoid block copolymers based on the bodys own amino acids sarcosine and lysine are prepared by ring opening polymerization of N-carboxyanhydrides. Block lengths were varied between 200-300 for the shielding polysarcosine block and 20-70 for the complexing polylysine block. Dispersity indexes ranged from 1.05 to 1.18. Polylysine is polymerized with benzyloxycarbonyl as well as trifluoroacetyl protecting groups at the ϵ-amine group and optimized deprotection protocols for both groups are reported. The obtained block ionomers are used to complex pDNA resulting in the formation of polyplexes (PeptoPlexes). The PeptoPlexes can be successfully applied in the transfection of HEK 293T cells and are able to transfect up to 50% of cells in vitro (FACS assay), while causing no detectable toxicity in an Annexin V assay. These findings are a first indication that PeptoPlexes may be a suitable alternative to PEG based non-viral transfection systems.

A controlled and versatile NCA polymerization method for the synthesis of polypeptides

A versatile and simple methodology for the preparation of well-defined polyglutamate nanocarriers is described. For the first time ammonium salts with non-nucleophilic tetrafluoroborate anions are used as initiators for the ring opening polymerization of α-N-carboxyanhydrides (NCAs) allowing a multigram scale polyglutamate synthesis with defined molecular weight (up to 800 units), low polydispersity (<1.2), controlled chain end functionality and adequate stereoselectivity and absence of any trace of toxic impurity to allow biomedical applications.

Directed Interactions of Block Copolypept(o)ides with Mannose-binding Receptors: PeptoMicelles Targeted to Cells of the Innate Immune System

Core-shell structures based on polypept(o)ides combine stealth-like properties of the corona material polysarcosine with adjustable functionalities of the polypeptidic core. Mannose-bearing block copolypept(o)ides (PSar-block-PGlu(OBn)) have been synthesized using 11-amino-3,6,9-trioxa-undecyl-2,3,4,6-tetra-O-acetyl-O-α-D-mannopyranoside as initiator in the sequential ring-opening polymerization of α-amino acid N-carboxyanhydrides. These amphiphilic block copolypept(o)ides self-assemble into multivalent PeptoMicelles and bind to mannose-binding receptors as expressed by dendritic cells. Mannosylated micelles showed enhanced cell uptake in DC 2.4 cells and in bone marrow-derived dendritic cells (BMDCs) and therefore appear to be a suitable platform for immune modulation.

Design of aromatic-containing cell-penetrating peptide mimics with structurally modified π electronics.

Cell-penetrating peptides (CPPs) and their synthetic mimics (CPPMs) represent a class of molecules that facilitate the intracellular delivery of various cargo. Previous studies indicated that the presence of aromatic functionalities improved CPPM activity. Given that aromatic functionalities play prominent roles in membrane biology and participate in various π interactions, we explored whether these interactions could be optimized for improved CPPM activity. CPPMs were synthesized by ring-opening metathesis polymerization by using monomers that contained aromatic rings substituted with electron-donating and electron-withdrawing groups and covered an electrostatic potential range from -29.69 to +15.57 kcal mol(-1) . These groups altered the quadrupole moments of the aromatic systems and were used to test if such structural modifications changed CPPM activity. CPPMs were added to dye-loaded vesicles and the release of carboxyfluorescein was monitored as a function of polymer concentration. Changes in the effective polymer concentration to release 50% of the dye (effective concentration, EC50 ) were monitored. Results from this assay showed that the strength of the electron-donating and electron-withdrawing groups incorporated in the CPPMs did not alter polymer EC50 values or activity. This suggests that other design parameters may have a stronger impact on CPPM activity. In addition, these results indicate that a wide range of aromatic groups can be incorporated without negatively impacting polymer activity.

Synthesis and sequential deprotection of triblock copolypept(o)ides using orthogonal protective group chemistry.

The synthesis of triblock copolymers based on polysarcosine, poly-N-ε-t-butyloxycarbonyl-l-lysine, and poly-N-ε-t-trifluoroacetyl-l-lysine by ring-opening polymerization of the corresponding α-amino acid N-carboxyanhydrides (NCAs) is described. For the synthesis of N-ε-t-butyloxycarbonyl-l-lysine (lysine(Boc)) NCAs, an acid-free method using trimethylsilylchloride/triethylamine as hydrochloric acid (HCl) scavengers is presented. This approach enables the synthesis of lysine(Boc) NCA of high purity (melting point 138.3 °C) in high yields. For triblock copolypept(o)ides, the degree of polymerization (Xn ) of the polysarcosine block is varied between 200 and 600; poly-N-ε-t-butyloxycarbonyl-l-lysine and poly-N-ε-t-trifluoroacetyl-l-lysine blocks are designed to have a Xn in the range of 10-50. The polypeptide-polypeptoid hybrids (polypept(o)ides) can be synthesized with precise control of molecular weight, high end group integrity, and dispersities indices between 1.1 and 1.2. But more important, the use of tert-butyloxycarbonyl- and trifluoroacetyl-protecting groups allows the selective, orthogonal deprotection of both blocks, which enables further postpolymerization modification reactions in a block-selective manner. Therefore, the presented synthetic approach provides a versatile pathway to triblock copolypept(o)ides, in which functionalities can be separated in specific blocks.

Cooperative Catechol-Functionalized Polypept(o)ide Brushes and Ag Nanoparticles for Combination of Protein Resistance and Antimicrobial Activity on Metal Oxide Surfaces

Prevention of biofouling and microbial contamination of implanted biomedical devices is essential to maintain their functionality and biocompatibility. For this purpose, polypept(o)ide block copolymers have been developed, in which a protein-resistant polysarcosine (pSar) block is combined with a dopamine-modified poly(glutamic acid) block for surface coating and silver nanoparticles (Ag NPs) formation. In the development of a novel, versatile, and biocompatible antibacterial surface coating, block lengths pSar were varied to derive structure-property relationships. Notably, the catechol moiety performs two important tasks in parallel; primarily it acts as an efficient anchoring group to metal oxide surfaces, while it furthermore induces the formation of Ag NPs. Attributing to the dual function of catechol moieties, antifouling pSar brush and antimicrobial Ag NPs can not only adhere stably on metal oxide surfaces, but also display passive antifouling and active antimicrobial activity, showing good biocompatibility simultaneously. The developed strategy seems to provide a promising platform for functional modification of biomaterials surface to preserve their performance while reducing the risk of bacterial infections.