Allan A. Hauer

Symmetry experiments in gas‐filled hohlraums at NOVA

Understanding drive symmetry in gas‐filled hohlraums is currently of interest because the baseline design of the indirect drive ignition target for the planned National Ignition Facility uses a gas‐filled hohlraum. This paper reports on the results of a series of experiments performed at the Nova laser [C. Bibeau et al. Appl. Opt. 31, 5799 (1992)] facility at Lawrence Livermore National Laboratory with the goal of understanding time‐dependent drive symmetry in gas filled hohlraums. Time‐dependent symmetry data from capsule implosions and reemission targets in gas‐filled hohlraums are discussed. Results of symmetry measurements using thin wall gas‐filled hohlraums are also discussed. The results show that the gas is effective in impeding the motion of the wall blowoff material, and that the resulting implosion performance of the capsule is not significantly degraded from vacuum results. The implosion symmetry in gas differs from vacuum results with similar laser pointing indicating a shift in beam position...

The role of symmetry in indirect‐drive laser fusion

Good radiation drive symmetry will be crucial for achieving ignition in laboratory inertial fusion experiments. The indirect‐drive inertial confinement fusion (ICF) method utilizes the soft x‐ray field in a radiation‐containing cavity, or hohlraum, to help achieve a high degree of symmetry. Achievement of the conditions necessary for ignition and gain will require experimental fine tuning of the drive symmetry. In order to make tuning possible, a significant effort has been devoted to developing symmetry measurement techniques. These techniques have been applied to a series of experiments that give a graphic picture of the symmetry conditions in the complex hohlraum environment. These experiments have been compared with detailed, fully integrated theoretical modeling. The ultimate goal of this work is the detailed understanding of symmetry conditions and the methods for their control. Comparison with experiments provides crucial benchmarking for the modeling—a key element in planning for ignition.

Solid-state experiments at high pressure and strain rate

Experiments have been developed using high powered laser facilities to study the response of materials in the solid state under extreme pressures and strain rates. Details of the target and drive development required for solid-state experiments and results from two separate experiments are presented. In the first, thin foils were compressed to a peak pressure of 180 GPa and accelerated. A pre-imposed modulation at the embedded Rayleigh–Taylor unstable interface was observed to grow. The growth rates were fluid-like at early time, but suppressed at later time. This result is suggestive of the theory of localized heating in shear bands, followed by conduction of the heat into the bulk material, allowing for recovery of the bulk material strength. In the second experiment, the response of Si was studied by dynamic x-ray diffraction. The crystal was observed to respond with uni-axial compression at a peak pressure 11.5–13.5 GPa.

Target diagnostic system for the national ignition facility (invited)

A review of recent progress on the design of a diagnostic system proposed for ignition target experiments on the National Ignition Facility (NIF) will be presented. This diagnostic package contains an extensive suite of optical, x ray, gamma ray, and neutron diagnostics that enable measurements of the performance of both direct and indirect driven NIF targets. The philosophy used in designing all of the diagnostics in the set has emphasized redundant and independent measurement of fundamental physical quantities relevant to the operation of the NIF target. A unique feature of these diagnostics is that they are being designed to be capable of operating in the high radiation, electromagnetic pulse, and debris backgrounds expected on the NIF facility. The diagnostic system proposed can be categorized into three broad areas: laser characterization, hohlraum characterization, and capsule performance diagnostics. The operating principles of a representative instrument from each class of diagnostic employed in t...

Laser-induced shock waves in condensed matter: some techniques and applications

Laser-induced shock waves in condensed matter have important applications in dynamic material studies and high pressure physics. We briefly review some techniques in laser-induced shock waves, including direct laser drive, laser-launched flyer plate, quasi-isentropic loading, point and line imaging velocity interferometry, transient X-ray diffraction, spectroscopy and shock recovery, and their applications to study of equation of state, spallation, and phase transitions.

Review of drive symmetry measurement and control experiments on the Nova laser system (invited)

Good radiation drive symmetry is crucial for achieving ignition in laboratory inertial fusion experiments. X‐ray drive symmetry in hohlraums has been the subject of investigation for more than four years and a great deal of progress has been made. Over the last two to three years, a concerted series of (indirect) drive symmetry experiments has been performed on the Nova laser system and is the subject of the present paper. The goals of this work have been to develop measurement techniques and to apply them to symmetry variation and control experiments. The principal diagnostic has utilized the symmetry signature impressed on the dense core of a target imploded by the hohlraum x‐ray environment. The core is distorted by drive asymmetries and x‐ray imaging of this core provides a mapping that can be compared with theoretical modeling and thus related to specific amounts of drive asymmetry. We will describe the instruments and measurement techniques used in these experiments and present representative data a...

Density and temperature diagnostic based on the Ar He β line and associated Li‐like satellites

We have modeled the temperature and density dependence of the Li‐like satellites of the Ar He β line by performing NLTE kinetic modeling of level populations in conjunction with Stark broadening calculations. Composite line profiles are computed including resonance and satellite line transitions that have built‐in the temperature and density dependence characteristic of the level populations and Stark broadening of these transitions. These synthetic spectra can be used to analyze experimental data, providing a simultaneous diagnostic of temperature and density.

Demonstration of time-dependent symmetry control in hohlraums by drive-beam staggering

Indirect-drive inertial confinement fusion makes use of cavities constructed of high atomic number materials to convert laser power into x-rays for ablatively driving an implosion capsule. Obtaining spatially uniform drive on the capsule requires a careful balancing between the laser absorption region (high drive) and the laser entrance holes (low drive). This balancing is made difficult because of plasma expansion, and the associated movement of the laser absorption region with time. This paper reports the first experimental demonstration of compensation for this motion by using different laser beams at different times, in agreement with modeling.

Observation of reduced beam deflection using smoothed beams in gas-filled hohlraum symmetry experiments at Nova

Execution and modeling of drive symmetry experiments in gas-filled hohlraums have been pursued to provide both a better understanding of radiation symmetry in such hohlraums and to verify the accuracy of the design tools which are used to predict target performance for the National Ignition Facility (NIF) [J. Lindl, Phys. Plasmas 2, 3933 (1995)]. In this paper, the results of a series of drive symmetry experiments using gas-filled hohlraums at the Nova laser facility [C. Bibeau et al., Appl. Opt. 31, 5799 (1992)] at Lawrence Livermore National Laboratory are presented. A very important element of these experiments was the use of kineform phase plates (KPP) to smooth the Nova beams. The effect of smoothing the ten Nova beams with KPP phase plates is to remove most of the beam bending which had been observed previously, leaving a residual bending of only 1.5°, equivalent to a 35 μm pointing offset at the hohlraum wall. The results show that the symmetry variation with pointing of implosions in gas-filled ho...

Simulation of X-ray line transfer in a cylindrically expanding plasma

Abstract A method for calculating the X-ray resonance line emission from a cylindrically expanding laser-produced plasma is presented. A multi-frequency line transfer algorithm, incorporated as a post-processor to a time-dependent 1-D hydrodynamics and non-LTE atomic physics calculation, is used to compute spatially-resolved spectral profiles of the line emission. Coupling of photon re-absorption to ionic state populations is achieved by use of the escape probability method. We use the code to investigate the effects of high expansion velocities, and the influence of neighbouring lines, on the opacity and detailed shape of optically thick lines. As an example we consider the profile of the Lyman-α (1s-2p) resonance line of hydrogenic aluminium.