Antoine Reserbat-Plantey

Picosecond photoresponse in van der Waals heterostructures

Two-dimensional crystals such as graphene and transition-metal dichalcogenides demonstrate a range of unique and complementary optoelectronic properties. Assembling different two-dimensional materials in vertical heterostructures enables the combination of these properties in one device, thus creating multifunctional optoelectronic systems with superior performance. Here, we demonstrate that graphene/WSe2/graphene heterostructures ally the high photodetection efficiency of transition-metal dichalcogenides with a picosecond photoresponse comparable to that of graphene, thereby optimizing both speed and efficiency in a single photodetector. We follow the extraction of photoexcited carriers in these devices using time-resolved photocurrent measurements and demonstrate a photoresponse time as short as 5.5 ps, which we tune by applying a bias and by varying the transition-metal dichalcogenide layer thickness. Our study provides direct insight into the physical processes governing the detection speed and quantum efficiency of these van der Waals heterostuctures, such as out-of-plane carrier drift and recombination. The observation and understanding of ultrafast and efficient photodetection demonstrate the potential of hybrid transition-metal dichalcogenide-based heterostructures as a platform for future optoelectronic devices.

Epitaxial graphene prepared by chemical vapor deposition on single crystal thin iridium films on sapphire

Uniform single layer graphene was grown on single-crystal Ir films a few nanometers thick which were prepared by pulsed laser deposition on sapphire wafers. These graphene layers have a single crystallographic orientation and a very low density of defects, as shown by diffraction, scanning tunnelling microscopy, and Raman spectroscopy. Their structural quality is as high as that of graphene produced on Ir bulk single crystals, i.e., much higher than on metal thin films used so far.

Surface-Enhanced Raman Signal for Terbium Single-Molecule Magnets Grafted on Graphene

We report the preparation and characterization of monolayer graphene decorated with functionalized single-molecule magnets (SMMs). The grafting ligands provide a homogeneous and selective deposition on graphene. The grafting is characterized by combined Raman microspectroscopy, atomic force microscopy (AFM), and electron transport measurements. We observe a surface-enhanced Raman signal that allowed us to study the grafting down to the limit of a few isolated molecules. The weak interaction through charge transfer is in agreement with ab initio DFT calculations. Our results indicate that both molecules and graphene are essentially intact and the interaction is driven by van der Waals forces.

Homogeneous Optical and Electronic Properties of Graphene Due to the Suppression of Multilayer Patches During CVD on Copper Foils

By limiting the carbon segregation at the copper surface defects, a pulsed chemical vapor deposition method for single layer graphene growth is shown to inhibit the formation of few-layer regions, leading to a fully single-layered graphene homogeneous at the centimeter scale. Graphene field-effect devices obtained after transfer of pulsed grown graphene on oxidized silicon exhibit mobilities above 5000 cm^2.V^-1.s^-1.

A local optical probe for measuring motion and stress in a nanoelectromechanical system

Nanoelectromechanical systems can be operated as ultrasensitive mass sensors and ultrahigh-frequency resonators, and can also be used to explore fundamental physical phenomena such as nonlinear damping and quantum effects in macroscopic objects. Various dissipation mechanisms are known to limit the mechanical quality factors of nanoelectromechanical systems and to induce aging due to material degradation, so there is a need for methods that can probe the motion of these systems, and the stresses within them, at the nanoscale. Here, we report a non-invasive local optical probe for the quantitative measurement of motion and stress within a nanoelectromechanical system, based on Fizeau interferometry and Raman spectroscopy. The system consists of a multilayer graphene resonator that is clamped to a gold film on an oxidized silicon surface. The resonator and the surface both act as mirrors and therefore define an optical cavity. Fizeau interferometry provides a calibrated measurement of the motion of the resonator, while Raman spectroscopy can probe the strain within the system and allows a purely spectral detection of mechanical resonance at the nanoscale.Nanoelectromechanical systems (NEMSs) are emerging nanoscale elements at the crossroads between mechanics, optics and electronics, with significant potential for actuation and sensing applications. The reduction of dimensions compared to their micronic counterparts brings new effects including sensitivity to very low mass, resonant frequencies in the radiofrequency range, mechanical non-linearities and observation of quantum mechanical effects. An important issue of NEMS is the understanding of fundamental physical properties conditioning dissipation mechanisms, known to limit mechanical quality factors and to induce aging due to material degradation. There is a need for detection methods tailored for these systems which allow probing motion and stress at the nanometer scale. Here, we show a non-invasive local optical probe for the quantitative measurement of motion and stress within a multilayer graphene NEMS provided by a combination of Fizeau interferences, Raman spectroscopy and electrostatically actuated mirror. Interferometry provides a calibrated measurement of the motion, resulting from an actuation ranging from a quasi-static load up to the mechanical resonance while Raman spectroscopy allows a purely spectral detection of mechanical resonance at the nanoscale. Such spectroscopic detection reveals the coupling between a strained nano-resonator and the energy of an inelastically scattered photon, and thus offers a new approach for optomechanics.

High Quality Factor Mechanical Resonators Based on WSe2 Monolayers

Suspended monolayer transition metal dichalcogenides (TMD) are membranes that combine ultralow mass and exceptional optical properties, making them intriguing materials for opto-mechanical applications. However, the low measured quality factor of TMD resonators has been a roadblock so far. Here, we report an ultrasensitive optical readout of monolayer TMD resonators that allows us to reveal their mechanical properties at cryogenic temperatures. We find that the quality factor of monolayer WSe2 resonators greatly increases below room temperature, reaching values as high as 1.6 × 104 at liquid nitrogen temperature and 4.7 × 104 at liquid helium temperature. This surpasses the quality factor of monolayer graphene resonators with similar surface areas. Upon cooling the resonator, the resonant frequency increases significantly due to the thermal contraction of the WSe2 lattice. These measurements allow us to experimentally study the thermal expansion coefficient of WSe2 monolayers for the first time. High Q-factors are also found in resonators based on MoS2 and MoSe2 monolayers. The high quality-factor found in this work opens new possibilities for coupling mechanical vibrational states to two-dimensional excitons, valley pseudospins, and single quantum emitters and for quantum opto-mechanical experiments based on the Casimir interaction.

Time- and space-modulated Raman signals in graphene-based optical cavities

We present fabrication and optical characterization of micro-cavities made of multilayer graphene (MLG) cantilevers clamped by metallic electrodes and suspended over Si/SiO2 substrates. Graphene cantilevers act as semi-transparent mirrors closing air wedge optical cavities. This simple geometry implements a standing-wave optical resonator along with a mechanical one. Equal thickness interference fringes are observed in both Raman and Rayleigh backscattered signals, with interfringe given by their specific wavelength. Chromatic dispersion within the cavity makes possible the spatial modulation of graphene Raman lines and selective rejection of the silicon background signal. Electrostatic actuation of the multilayer graphene cantilever by a gate voltage tunes the cavity length and induces space and time modulation of the backscattered light, including the Raman lines. We demonstrate the potential of these systems for high-sensitivity Raman measurements of generic molecular species grafted on a multilayer graphene surface. The Raman signal of the molecular layer can be modulated both in time and space in a similar fashion and shows enhancement with respect to a collapsed membrane.

Environmental Electrometry with Luminescent Carbon Nanotubes

We demonstrate that localized excitons in luminescent carbon nanotubes can be utilized to study electrostatic fluctuations in the nanotube environment with sensitivity down to the elementary charge. By monitoring the temporal evolution of the cryogenic photoluminescence from individual carbon nanotubes grown on silicon oxide and hexagonal boron nitride, we characterize the dynamics of charge trap defects for both dielectric supports. We find a one order of magnitude reduction in the photoluminescence spectral wandering for nanotubes on extended atomically flat terraces of hexagonal boron nitride. For nanotubes on hexagonal boron nitride with pronounced spectral fluctuations, our analysis suggests proximity to terrace ridges where charge fluctuators agglomerate to exhibit areal densities exceeding those of silicon oxide. Our results establish carbon nanotubes as sensitive probes of environmental charge fluctuations and highlight their potential for applications in electrometric nanodevices with all-optical readout.