Anton Kiriy

Kumada Catalyst-Transfer Polycondensation: Mechanism, Opportunities, and Challenges

Kumada catalyst-transfer polycondensation (KCTP) is a new but rapidly developing method with great potential for the preparation of well-defined conjugated polymers (CPs). The recently discovered chain-growth mechanism is unique among the various transition metal-catalyzed polycondensations, and has thus attracted much attention among researchers. Most progress is found in the areas of mechanism and external initiation via new initiators, but also the number of monomers other than thiophene that can be polymerized is steadily increasing. Accordingly, the variety of CP chain architectures is increasing as well, and a considerable contribution of KCTP toward more efficient materials can be expected in the future. This review critically focuses on very recent progress in the synthesis of CPs and the mechanism of KCTP, and is finally aimed at providing a comprehensive picture of this exciting polymerization method.

On the Role of Single Regiodefects and Polydispersity in Regioregular Poly(3-hexylthiophene): Defect Distribution, Synthesis of Defect-Free Chains, and a Simple Model for the Determination of Crystallinity

Identifying structure formation in semicrystalline conjugated polymers is the fundamental basis to understand electronic processes in these materials. Although correlations between physical properties, structure formation, and device parameters of regioregular, semicrystalline poly(3-hexylthiophene) (P3HT) have been established, it has remained difficult to disentangle the influence of regioregularity, polydispersity, and molecular weight. Here we show that the most commonly used synthetic protocol for the synthesis of P3HT, the living Kumada catalyst transfer polycondensation (KCTP) with Ni(dppp)Cl(2) as the catalyst, leads to regioregular chains with one single tail-to-tail (TT) defect distributed over the whole chain, in contrast to the hitherto assumed exclusive location at the chain end. NMR end-group analysis and simulations are used to quantify this effect. A series of entirely defect-free P3HT materials with different molecular weights is synthesized via new, soluble nickel initiators. Data on structure formation in defect-free P3HT, as elucidated by various calorimetric and scattering experiments, allow the development of a simple model for estimating the degree of crystallinity. We find very good agreement for predicted and experimentally determined degrees of crystallinities as high as ∼70%. For Ni(dppp)Cl(2)-initiated chains comprising one distributed TT unit, the comparison of simulated crystallinities with calorimetric and optical measurements strongly suggests incorporation of the TT unit into the crystal lattice, which is accompanied by an increase in backbone torsion. Polydispersity is identified as a major parameter determining crystallinity within the molecular weight range investigated. We believe that the presented approach and results not only contribute to understanding structure formation in P3HT but are generally applicable to other semicrystalline conjugated polymers as well.

“Hairy” Poly(3-hexylthiophene) Particles Prepared via Surface-Initiated Kumada Catalyst-Transfer Polycondensation

Herein, we present a new paradigm in the engineering of nanostructured hybrids between conjugated polymer and inorganic materials via a chain-growth surface-initiated Kumada catalyst-transfer polycondensation (SI-KCTP) from particles. Poly(3-hexylthiophene), P3HT, a benchmark material for organic electronics, was selectively grown by SI-KCTP from (nano)particles bearing surface-immobilized Ni catalysts supported by bidentate phosphorus ligands, that resulted in hairy (nano)particles with end-tethered P3HT chains. Densely grafted P3HT chains exhibit strongly altered optical properties compared to the untethered counterparts (red shift and vibronic fine structure in absorption and fluorescence spectra), as a result of efficient planarization and chain-aggregation. These effects are observed in solvents that are normally recognized as good solvents for P3HT (e.g., tetrahydrofurane). We attribute this to strong interchain interactions within densely grafted P3HT chains, which can be tuned by changing the surface curvature (or size) of the supporting particle. The hairy P3HT nanoparticles were successfully applied in bulk heterojunction solar cells.

Chain-growth polymerization of unusual anion-radical monomers based on naphthalene diimide: a new route to well-defined n-type conjugated copolymers.

Strongly electron-deficient (n-type) main-chain π-conjugated polymers are commonly prepared via well-established step-growth polycondensation protocols which enable limited control over polymerization. Here we demonstrate that activated Zn and electron-deficient brominated thiophene-naphthalene diimide oligomers form anion-radical complexes instead of conventional Zn-organic derivatives. These highly unusual zinc complexes undergo Ni-catalyzed chain-growth polymerization leading to n-type conjugated polymers with controlled molecular weight, relatively narrow polydispersities, and specific end-functions.

Grafting of Polyfluorene by Surface‐Initiated Suzuki Polycondensation

Graft work: The first surface-initiated and site-specific palladium-catalyzed Suzuki polycondensation that allows selective grafting and patterning of semiconducting and emissive poly[9,9-bis(2-ethylhexyl)fluorene] (1) at room temperature is developed (see scheme). The patterning is demonstrated by AFM (see image).

Surface Engineering Using Kumada Catalyst-Transfer Polycondensation (KCTP): Preparation and Structuring of Poly(3-hexylthiophene)-Based Graft Copolymer Brushes

Poly(4-vinylpyridine)-block-poly(4-iodo-styrene), P4VP-b-PS(I), block copolymers obtained by iodination of readily available P4VP-b-PS block copolymers strongly adhere to variety of polar substrates including Si wafers, glasses, or metal oxide surfaces by a polar P4VP block, forming polymer brushes of moderately stretched PS(I) chains. Kumada catalyst-transfer polycondensation (KCTP) from the P4VP-b-PS(I) brushes results into planar brushes of the graft copolymer in which relatively short ( approximately 10 nm) poly(3-hexylthiophene), P3HT, grafts emanate from the surface-tethered PS(I) chains. Grafting of the P3HT leads to significant stretching of the PS(I) backbone as a result of increased excluded volume interactions. Specific adsorption of the P4VP block to polar surfaces was utilized in this work to pattern the P4VP(25)-b-PS(I)(350) brush. The microscopically structured P4VP(25)-b-PS(I)(350) brush was converted into the respectively patterned P4VP-PS(I)-g-P3HT one using KCTP. We also demonstrated that KCTP from functional block copolymers is an attractive option for nanostructuring with polymer brushes. P4VP(75)-b-PS(I)(313) micelles obtained in selective solvent for the PS(I) block form a quasi-ordered hexagonal array on Si wafer. The P4VP(75)-b-PS(I)(313) monolayer preserves the characteristic quasi-regular arrangement of the micelles even after extensive rinsing with various solvents. Although the grafting of P3HT from the nanopatterned P4VP(75)-b-PS(I)(313) brush destroys the initial order, the particulate morphology in the resulting film is preserved. We believe that the developed method to structured brushes of conductive polymers can be further exploited in novel stimuli-responsive materials, optoectronic devices, and sensors.

Palladium‐Catalyzed Chain‐Growth Polycondensation of AB‐type Monomers: High Catalyst Turnover and Polymerization Rates

Chain-growth catalyst-transfer polycondensations of AB-type monomers is a new and rapidly developing tool for the preparation of well-defined π-conjugated (semiconducting) polymers for various optoelectronic applications. Herein, we report the Pd/PtBu3-catalyzed Negishi chain-growth polycondensation of AB-type monomers, which proceeds with unprecedented TONs of above 100,000 and TOFs of up to 280 s(-1). In contrast, related AA/BB-type step-growth polycondensation proceeds with two orders of magnitude lower TONs and TOFs. A similar trend was observed in Suzuki-type polycondensation. The key impact of the intramolecular (vs. intermolecular) catalyst-transfer process on both polymerization kinetics and catalyst lifetime has been revealed.

Ordered surface structures from PNIPAM-based loosely packed microgel particles

On-surface self-assembly of several types of microgels prepared via the precipitation polymerization of (N-isopropylacrylamide) (NIPAM) with N,N′-methylenebisacrylamide (MBA), acrylic acid or acrylamide as comonomers is investigated with the aim to establish the main factors that govern the formation of periodic loosely packed (PLP) two-dimensional arrays. A core–shell structure is detected for all microgels, with the thickest shells being observed for the microgels containing acrylic acid or acrylamide. The main factor driving the formation of PLP arrays and determining the microgel separation is found to be the presence of large low-density shells around the highly cross-linked cores of the microgels. This key observation of our experiments has been explained by the developed theoretical model that proves to adequately describe the experimental findings. The size of microgel dry-state “footprints” can be reduced by making use of plasma-etching. The periodic microgel arrays are used as masks for the preparation of patterns of reactive silanes with controllable separation between the patterned features. Sputtering of gold onto the periodic microgel arrays followed by washing out the microgels in ultrasonic bath is proven to be an efficient way of preparing perforated gold films with PLP holes.

Highly ordered arrays of magnetic nanoparticles prepared via block copolymer assembly

In the present study we report a simple and reproducible method to prepare highly ordered arrays of Fe3O4 superparamagnetic nanoparticles (MNPs) via block copolymer (BCP) self assembly. Pre-synthesized MNPs with a mean diameter of 6.1 nm are selectively segregated within the lamellae or hexagonally packed cylinders composed of PVP blocks in poly(styrene-b-vinylpyridine) (PS-b-PVP) block copolymers without any additional surface modification. The density of the stabilizing shell in the MNPs as well as the position of pyridine nitrogen in the PVP block of the BCPs are found to be crucial for selective incorporation of MNPs into the PVP domains. The obtained results suggest a key importance of a mutual affinity between active blocks and the nanoparticles which should be maximized in order to attain high nanoparticles loadings and long-range structural orders.

High Conductivity in Molecularly p‐Doped Diketopyrrolopyrrole‐Based Polymer: The Impact of a High Dopant Strength and Good Structural Order

[3]-Radialene-based dopant CN6-CP studied herein, with its reduction potential of +0.8 versus Fc/Fc+ and the lowest unoccupied molecular orbital level of -5.87 eV, is the strongest molecular p-dopant reported in the open literature, so far. The efficient p-doping of the donor-acceptor dithienyl-diketopyrrolopyrrole-based copolymer having the highest unoccupied molecular orbital level of -5.49 eV is achieved. The doped films exhibit electrical conductivities up to 70 S cm(-1) .