Anubha Goyal

In situ Synthesis of Metal Nanoparticle Embedded Free Standing Multifunctional PDMS Films

We demonstrate a simple one-step method for synthesizing noble metal nanoparticle embedded free standing polydimethylsiloxane (PDMS) composite films. The process involves preparing a homogenous mixture of metal salt (silver, gold and platinum), silicone elastomer and the curing agent (hardener) followed by curing. During the curing process, the hardener crosslinks the elastomer and simultaneously reduces the metal salt to form nanoparticles. This in situ method avoids the use of any external reducing agent/stabilizing agent and leads to a uniform distribution of nanoparticles in the PDMS matrix. The films were characterized using UV-Vis spectroscopy, transmission electron microscopy and X-ray photoemission spectroscopy. The nanoparticle-PDMS films have a higher Youngs modulus than pure PDMS films and also show enhanced antibacterial properties. The metal nanoparticle-PDMS films could be used for a number of applications such as for catalysis, optical and biomedical devices and gas separation membranes.

Spontaneous dissolution of ultralong single- and multiwalled carbon nanotubes.

We report that chlorosulfonic acid is a true solvent for a wide range of carbon nanotubes (CNTs), including single-walled (SWNTs), double-walled (DWNTs), multiwalled carbon nanotubes (MWNTs), and CNTs hundreds of micrometers long. The CNTs dissolve as individuals at low concentrations, as determined by cryo-TEM (cryogenic transmission electron microscopy), and form liquid-crystalline phases at high concentrations. The mechanism of dissolution is electrostatic stabilization through reversible protonation of the CNT side walls, as previously established for SWNTs. CNTs with highly defective side walls do not protonate sufficiently and, hence, do not dissolve. The dissolution and liquid-crystallinity of ultralong CNTs are critical advances in the liquid-phase processing of macroscopic CNT-based materials, such as fibers and films.

Flexible Carbon Nanotube–Cu2O Hybrid Electrodes for Li‐Ion Batteries

This study demonstrates the formation of a flexible and free-standing carbon nanotube-copper oxide-poly(vinylidene fluoride) (CNT-Cu(2) O-PVDF) nanocomposite and its application as an electrode-separator material for Li-ion batteries. Binder-free hybrid electrodes are obtained by conformally coating CNTs with Cu(2) O via electrodeposition and then embedding the resulting architecture into a porous poly(vinylidene fluoride-hexafluoropropylene) PVDF-HFP-SiO(2) polymer electrolyte membrane. The synergistic presence of high-capacity transition metal oxides and conductive CNTs results in twice the reversible areal capacity of 2.3 mAh cm(-2) as compared to 1.2 mAh cm(-2) for pure CNTs.

Cooperative Adhesion and Friction of Compliant Nanohairs

The adhesion and friction behavior of soft materials, including compliant brushes and hairs, depends on the temporal and spatial evolution of the interfaces in contact. For compliant nanofibrous materials, the actual contact area individual fibers make with surfaces depends on the preload applied upon contact. Using in situ microscopy observations of preloaded nanotube hairs, we show how nanotubes make cooperative contact with a surface by buckling and conforming to the surface topography. The overall adhesion of compliant nanohairs increases with increasing preload as nanotubes deform and continuously add new side-wall contacts with the surface. Electrical resistance measurements indicate significant hysteresis in the relative contact area. Contact area increases with preload (or stress) and decreases suddenly during unloading, consistent with strong adhesion observed for these complaint nanohairs.

Temperature dependent high-bias electrical properties of C60 microrods

We present the fabrication, characterization, and temperature dependent electrical properties of individual submicron-sized hexagonal rods of C60. These rods were synthesized by liquid-liquid interfacial precipitation methods and characterized by scanning electron and transmission electron microscopies and Raman spectroscopy. The microscopic analysis reveals highly developed crystalline order. Two-probe platinum-contacted devices were fabricated using long (∼30–50μm) individual C60 rods by focused ion beam assisted deposition on insulating (Si∕SiO2) substrates. Current-voltage (IV) measurements were performed on these devices in the temperature range of 18–300K under an applied voltage of −20to20V. Our measurements reveal an overall decrease in conductivity with decreasing temperature, with structures appearing commensurately with the known positions of the phase transitions. Cyclic high-bias measurements show substantial hysteretic behavior below T∼260K, expected from a sudden and large increase in the d...