Burcu Dogan-Topal

Voltammetric studies on the HIV-1 inhibitory drug Efavirenz: The interaction between dsDNA and drug using electrochemical DNA biosensor and adsorptive stripping voltammetric determination on disposable pencil graphite electrode

The interaction of Efavirenz (EFV) with fish sperm dsDNA immobilized onto pencil graphite electrode (PGE) has been studied by using differential pulse voltammetric technique using an electrochemical DNA biosensor. The guanine signal was lower with (double stranded-DNA) dsDNA-treated PGE than the untreated electrode after the interaction with EFV occurred. The changes in the experimental parameters such as the accumulation time and the concentration of EFV were also studied. All necessary parameters such as sensitivity, selectivity, accuracy and precision were calculated. In addition, the detection and determination limits, reproducibility and applicability of the analysis to pharmaceutical dosage forms were also investigated. These results showed that this DNA biosensor could be used for the sensitive, rapid simple and cost effective detection and determination of EFV-dsDNA interaction. The linearity was between 2 and 24 ppm of EFV concentration on guanine signal decreasing curve. EFV showed an irreversible oxidation behavior at all investigated pH values. This oxidation step was adsorption controlled on PGE. Hence, differential pulse adsorptive stripping (AdsDPV) voltammetric method was developed for the determination of EFV. Accumulation time and potential were optimized. Under these conditions, the current showed a linear dependence with concentration in the range between 0.018 and 2.56 ppm. Both determination methods were fully validated and applied for the analysis of EFV pharmaceutical dosage form.

The Analytical Applications of Square Wave Voltammetry on Pharmaceutical Analysis

Compared to other voltammetric techniques a square wave voltammetry (SWV), which is presented in this minireview, has a several advantages such as high speed, increased analytical sensitivity and relative insensitivity to the presence of dissolved oxygen. Also it is an electrochemical technique used in analytical applications and fundamental studies of electrode mechanism. This paper delivers both the underlying theory and the practical guidance needed to apply square wave techniques and also provides a wide collection of data for the description of diverse tendencies that characterize several electrochemical reactions analyzed by SWV. This review summarizes some of the recent developments and application of direct and stripping SWV for drug compounds in their dosage forms and biological samples as reported in the period from 1997 till 2010 year.

A novel sensitive electrochemical DNA biosensor for assaying of anticancer drug leuprolide and its adsorptive stripping voltammetric determination

The anticancer drug, leuprolide (LPR) bound to double-stranded fish sperm DNA (dsDNA) which was immobilized onto the surface of an anodically activated pencil graphite electrode (PGE), was employed for designing a sensitive biosensor. The interaction of leuprolide (LPR) with double-stranded DNA (dsDNA) immobilized onto pencil graphite electrode (PGE) have been studied by electrochemical methods. The mechanism of the interaction was investigated and confirmed by differential pulse voltammetry using two different interaction methods; at the PGE surface and in the solution phase. The decrease in the guanine oxidation peak current was used as an indicator for the interaction in acetate buffer at pH 4.80. The response was optimized with respect to accumulation time, potential, drug concentration, and reproducibility for both interaction methods. The linear response was obtained in the range of 0.20-6.00 ppm LPR concentration with a detection limit of 0.06 ppm on DNA modified PGE and between 0.20 and 1.00 ppm concentration range with detection limit of 0.04 ppm for interaction in solution phase method. LPR showed an irreversible oxidation behavior at all investigated pH values on a bare PGE. Differential pulse adsorptive stripping (AdSDPV) voltammetric method was developed for the determination of LPR. Under these conditions, the current showed a linear dependence with concentration within a range of 0.005-0.20 ppm with a detection limit of 0.0014 ppm. Each determination method was fully validated and applied for the analysis of LPR in its pharmaceutical dosage form.

Investigation of Electrochemical Behavior of Lipid Lowering Agent Atorvastatin Calcium in Aqueous Media and its Determination from Pharmaceutical Dosage Forms and Biological Fluids Using Boron-Doped Diamond and Glassy Carbon Electrodes

The electrochemical behavior of atorvastatin calcium at glassy carbon and boron-doped diamond electrodes has been studied using voltammetric techniques. The possible mechanism of oxidation was discussed with model compounds. The dependence of the peak current and potentials on pH, concentration, scan rate and nature of the buffer were investigated for both electrodes. The oxidation of atorvastatin was irreversible and exhibited a diffusion-controlled fashion on the diamond electrode. A linear response was obtained within the range of 9.65 x 10(-7) - 3.86 x 10(-5) M in 0.1 M H(2)SO(4) solution for both electrodes. The detection limits of a standard solution are estimated to be 2.11 x 10(-7) M with differential pulse voltammetry (DPV) and 2.05 x 10(-7)M with square wave voltammetry (SWV) for glassy carbon electrode, and 2.27 x 10(-7) M with DPV and 1.31 x 10(-7)M with SWV for diamond electrodes in 0.1 M H(2)SO(4) solution. The repeatability of the methods was found good for both electrodes. The methods were fully validated and successfully applied to the high-throughput determination of the drug in tablets, human serum and human urine with good recoveries.

Electrooxidative behavior and determination of trifluoperazine at multiwalled carbon nanotube-modified glassy carbon electrode

The mechanism of electrochemical oxidation of trifluoperazine has been proposed on the basis of cyclic and differential pulse voltammetry at a multiwalled carbon nanotube-modified glassy carbon electrode. The modified electrode exhibits catalytic activity, high sensitivity, and stability. The oxidation process exhibited an adsorption-controlled behavior. Also, depending on this adsorption control, a sensitive electroanalytical method for the determination of trifluoperazine has been investigated by adsorptive stripping differential pulse voltammetry. Under the optional conditions, the anodic peak current was linear to the trifluoperazine concentration over the range of 2.08 10−8 M to 1.67 10−6 M, and the limit of detection was 7.49 10−10 M. The modified electrode had good stability and repeatability, and it was successfully applied to the determination of trifluoperazine in pharmaceuticals.

Quantitative Analysis of Irbesartan in Pharmaceuticals and Human Biological Fluids by Voltammetry

Abstract A differential pulse (DP) and square wave (SW) voltammetric techniques were developed for the determination of irbesartan. The electrochemical behavior of irbesartan was investigated by cyclic voltammetry (CV), differential pulse voltammetry (DPV), and square wave voltammetry (SWV) at the hanging mercury drop electrode (HMDE). Different parameters were tested to optimize the conditions of the determination. It was found that in the range of 8 × 10−6–1 × 10−4 M, the currents measured by both of methods presented a good linear property as a function of the concentration of irbesartan. In addition, validation parameters, such as reproducibility, sensitivity, and recovery were evaluated as well. The slope of the log Ip- log ν linear plot was 0.58 indicating the diffusion control for 0.5 M sulphuric acid without the need for separation or complex sample preparation, since there was no interference from the excipients and endogenous substances. The methods were successfully applied to the analysis of irbesartan in the pharmaceutical tablet formulations and in human serum samples.

Analytical application of polymethylene blue-multiwalled carbon nanotubes modified glassy carbon electrode on anticancer drug irinotecan and determination of its ionization constant value

The voltammetric behavior of anticancer drug irinotecan (IRT) was investigated at poly (methylene blue)/multi-walled carbon nanotube (PMB/MWCNT) modified glassy carbon electrode (GCE). The modified electrode surface was characterized by a scanning electron microscope (SEM). The PMB/MWCNT modified GCE exhibits a distinct shift of the oxidation potential of IRT on the cathodic direction and a considerable enhancement of the peak current compared with bare electrode. The calibration curve was linear between the concentration range 8.0 × 10(-6) and 8.0 × 10(-5)M with the detection limit of 2.14 × 10(-7)M by differential pulse voltammetry in pH 10.0 Britton-Robinson buffer solution. Controlled potential coulometry was applied to find transferred electron numbers due to the oxidation of IRT. In this study, the pKa value of IRT was also determined by the dependence of the retention factor on the pH of the mobile phase. The effect of the mobile phase composition on the ionization constant was studied by measuring the pKa at different acetonitrile-water mixtures, ranging between 35 and 50% (v/v) using the reversed-phase liquid chromatography (RP-LC) method with UV detector. IRT was exposed to thermal, photolytic, hydrolytic and oxidative stress conditions, and the stressed samples were detected by the proposed method. Sensitive, rapid, and fully validated electrochemical and RP-LC methods for the determination of IRT in its dosage form were presented in details.

ELECTROCHEMICAL CHARACTERIZATION AND RAPID VOLTAMMETRIC DETERMINATION OF RILUZOLE IN PHARMACEUTICALS AND HUMAN SERUM

The electrochemical oxidation of riluzole was investigated using cyclic and linear sweep voltammetry. Under optimized conditions, current and concentration showed linear dependence in Britton Robinson buffer at pH 3.00 for boron doped diamond and pH 3.00 phosphate buffers for glassy carbon electrodes. Differential pulse and square wave voltammetry were used for the determination of riluzole levels in serum samples and pharmaceutical formulations. The limit of detections were found as 5.25 × 10−7 M and 8.26 × 10−8 M for glassy carbon electrode and 1.78 × 10−7 M and 8.42 × 10−8 M for boron-doped diamond electrodes, in serum samples, using differential pulse and square wave methods, respectively.

Electrochemical investigation and determination of ceftazidime in pharmaceutical dosage forms and human urine

A voltammetric study of the oxidation of Ceftazidime (CEFT) has been carried out at the glassy carbon electrode by cyclic, differential pulse (DPV) and square wave (SWV) voltammetry. The oxidation of CEFT was irreversible and exhibited diffusion controlled process depending on pH. The oxidation mechanism was proposed and discussed. According to the linear relationship between the peak current and concentration, DPV and SWV voltammetric methods for CEFT assay in pharmaceutical dosage forms and human urine were developed. For analytical purposes, a well resolved diffusion controlled voltammetric peak was obtained in 0.1 M H2SO4 at 1.00 and 1.02 V for differential pulse and square wave voltammetric techniques, respectively. The linear response was obtained within the range of 4 × 10−6−8 × 10−5 M with a detection limit of 6 × 10−7 M for differential pulse and 4 × 10−6–2 × 10−4 M with a detection limit of 1 × 10−6 M for square wave voltammetric technique. The determination of CEFT in 0.1 M H2SO4 was possible over the 2 × 10−6–1 × 10−4 M range in urine sample for both techniques. The standard addition method was used for the recovery studies.

Analytical Method Development and Validation of Pharmaceutical Analysis Using Chromatographic Techniques

Analytical methods including chromatographic methods are commonly used for the quantitative and qualitative analysis of raw materials, drug substances, drug products, and compounds in biological samples in pharmaceutical industry. The components monitored include chiral or achiral drugs, process impurities, residual solvents, excipients such as preservatives, degradation products, extractable and leachable from container and closure or manufacturing process, pesticide in drug product from plant origin, and metabolites. Validation of an analytical method which is used during drug development and drug manufacturing is required to demonstrate that the methods are fit for their intended purpose. Additionally, the pharmaceutical industry around the world is subject to extensive regulations due to the nature of its products. Analytical chemists play important roles in monitoring the drugs in their dosage forms and biological samples. From the viewpoints mentioned above, the title of this special issue was chosen so as to ask chemists to appreciate their great roles in chemistry science. This special issue features 8research articles. In this special issue, development of chromatographic methods such as high performance liquid chromatography, gas chromatography, micellar liquid chromatography, and their validations is presented. The purpose of this special issue will be to serve as a guide to what chromatographic methods bring to analytical and medicinal chemistry and other pharmaceutical sciences as well as briefly review their role in drugs and the new developments and validation of assay methods of pharmaceutically active compounds. Also, recent developments of application, evaluation, and validation of chromatographic methods are focused on by key topics in drug developments and analysis by assessment of the distinguished authors of this special issue. We hope that the reader will find a number of topics of interest and that additional new ideas will emerge from this special issue.