C. Lechanoine-Leluc

Plastic detectors for medium energy neutrons

Abstract Three neutron detectors made up of a total of fifty-three vertical plastic scintillator bars BC412 (equivalent to NE110) with 8 × 20 cm2 section and a sensitive height varying from 40 to 130 cm are used in the PS199 experiment at the CERN Low Energy Antiproton Ring (LEAR). Monitoring of the stability of the counters during data taking is done by a laser system. The TOF is calibrated with γ rays from the p p → π 0 ′s → γ′s reaction. A new method to calibrate the amplitude of the counters at low energy using 4.4 MeV gamma rays from an 241Am/Be source is described, as well as a high energy calibration using cosmic muons. The absolute neutron detection efficiency of the counters is measured for neutron energies varying from 33 MeV to 204 MeV. Measurements are performed at five counter thresholds of 1.5, 2.5, 4.5, 6.5 and 8.5 MeVee. A comparison of the experimental measurements with the predictions of a Monte Carlo computer code is presented.

A method to localize gamma-ray bursts using POLAR

The hard X-ray polarimeter POLAR aims to measure the linear polarization of the 50–500 keV photons arriving from the prompt emission of γ-ray bursts (GRBs). The position in the sky of the detected GRBs is needed to determine their level of polarization. We present here a method by which, despite of the polarimeter incapability of taking images, GRBs can be roughly localized using POLAR alone. For this purpose scalers are attached to the output of the 25 multi-anode photomultipliers (MAPMs) that collect the light from the POLAR scintillator target. Each scaler measures how many GRB photons produce at least one energy deposition above 50 keV in the corresponding MAPM. Simulations show that the relative outputs of the 25 scalers depend on the GRB position. A database of very strong GRBs simulated at 10 201 positions has been produced. When a GRB is detected, its location is calculated searching the minimum of the χ2χ2 obtained in the comparison between the measured scaler pattern and the database. This GRB localization technique brings enough accuracy so that the error transmitted to the 100% modulation factor is kept below 10% for GRBs with fluence Ftot≥10−5ergcm−2. The POLAR localization capability will be useful for those cases where no other instruments are simultaneously observing the same field of view.

POLAR: Final calibration and in-flight performance of a dedicated GRB polarimeter

Gamma-ray polarimetry is a new powerful tool to study the processes responsible for the emission from astrophysical sources and the environments in which this emission takes place. Few successful polarimetric measurements have however been performed thus far in the gamma-ray energy band due to the difficulties involved. POLAR is a dedicated polarimeter designed to perform high precision measurements of the polarization of the emission from gamma-ray burst in the 50-500 keV energy range. This new polarimeter is expected to detect approximately 50 gamma-ray bursts per year while performing high precision polarization measurements on approximately 10 bursts per year. The instrument was launched into lower earth orbit as part of the second Chinese space lab, the Tiangong-2, on September 15th 2016 and has been taking data successfully since being switched on one week after. The instrument uses a segmented scintillator array consisting of 1600 plastic scintillator bars, read out by 25 flat-panel multi-anode photomultipliers, to measure the Compton scattering angles of incoming photons. The small segmentation and relatively large uniform effective area allow the instrument to measure the polarization of a large number of transient events, such as gamma-ray bursts, with an unprecedented precision during its two year life-time. The final flight model underwent detailed calibration prior to launch as well as intensive space qualification tests, a summary of which will be presented in this paper. The instrument design will be discussed first followed by an overview of the on-ground tests, finally the in-orbit behavior as measured during the first weeks of the mission will be presented.

Performance study of the gamma-ray bursts polarimeter POLAR

The Gamma-ray Burst Polarimeter-POLAR is a highly sensitive detector which is dedicated to the measurement of GRB’s polarization with a large effective detection area and a large field of view (FOV). The optimized performance of POLAR will contribute to the capture and measurement of the transient sources like GRBs and Solar Flares. The detection energy range of POLAR is 50 keV ~ 500 keV, and mainly dominated by the Compton scattering effect. POLAR consists of 25 detector modular units (DMUs), and each DMU is composed of low Z material Plastic Scintillators (PS), multi-anode photomultipliers (MAPMT) and multi-channel ASIC Front-end Electronics (FEE). POLAR experiment is an international collaboration project involving China, Switzerland and Poland, and is expected to be launched in September in 2016 onboard the Chinese space laboratory “Tiangong-2 (TG-2)”. With the efforts from the collaborations, POLAR has experienced the Demonstration Model (DM) phase, Engineering and Qualification Model (EQM) phase, Qualification Model (QM) phase, and now a full Flight Model (FM) of POLAR has been constructed. The FM of POLAR has passed the environmental acceptance tests (thermal cycling, vibration, shock and thermal vacuum tests) and experienced the calibration tests with both radioactive sources and 100% polarized Gamma-Ray beam at ESRF after its construction. The design of POLAR, Monte-Carlo simulation analysis, as well as the performance test results will all be introduced in this paper.

POLAR trigger — Experimental verification

POLAR is a space-borne instrument designed for measurements of the polarization of the prompt hard X- and gamma-ray emission from the Gamma Ray Bursts (GRB). POLAR consists of 25 identical Detection Modules equipped with Front-End Electronics (FEE) units. This paper describes: design, strategy and verification process of the POLAR trigger mechanism.

Development of the Central Task Processing Unit for space-borne Gamma-Ray Burst polarimeter, POLAR

POLAR, a joint European-Chinese experiment, is a novel compact space-borne Compton polarimeter conceived and optimized for detection of the prompt emission of Gamma-Ray Bursts (GRB) and precise measurements of polarization in the hard X-ray energy range 50-500 keV. The complete instrument consists of two parts: internal one, placed inside spacelab and the detector itself, placed outside spacelab, called respectively IBOX and OBOX. The OBOX constitutes of 25 frontend electronic modules (FEE), high voltage and low voltage power supplies and the Central Task Processing Unit. The main functions of Central Task Processing Unit system are defined as follows: communication and transfer of data to IBOX, communication with all frontends, analysis of trigger signals and generation of global trigger signals, data acquisition, synchronizing of all frontends and control of power supplies. The functional requirements are fulfilled by three individual FPGA chips named respectively to their functions: Concentrator, Trigger and CPU. This article presents description of the Central Task Processing Unit hardware design and brief introduction to main components of the firmware developed for this device. Ongoing integration activities of the device with the complete POLAR instrument proved that all basic functions are working correctly. The qualification model of the instrument has been constructed and currently undergoes verification and validation tests in view of planned flight onboard the Chinese spacelab TG-2 scheduled for 2015.

POLAR: the first dedicated gamma-ray burst polarization experiment

POLAR is a Gamma-Ray Burst (GRB) polarization experiment in the energy range 50-500 keV. Detection principle of the gamma-ray polarization is based on the anisotropy of the Compton scattering. POLAR consists of 1600 low-Z plastic scintillator bars, read out by 25 flat-panel multianode photomultipliers. Simulations and experiments have shown that the polarization degree and angle can be retrieved from the modulation curves with the required accuracy. POLAR can reach a minimum detectable polarization of about 10%(3-sigma level) for several strongest GRB detections per year. Construction and assembly of the Qualification Model (QM) are ongoing, in view of a flight onboard of the Chinese Spacelab TG-2 scheduled for 2014.

Overcoming non-uniformity limits for space-borne hard X-ray polarimeter POLAR based on scintillators and multi-anode photo-multipliers

The main performance challenge of POLAR - a novel hard X-ray polarimeter, is to achieve high statistical accuracy and large modulation factors. Both require great level of response uniformity. Though, typical sensitivity of multi-anode PMTs may vary between its channels up to the factor of two to three. Moreover, the measured signal can be further altered by light coupling quality. We investigate response equalization based on utilizing of an optical mask with light-blocking diaphragms. It is placed between scintillator bars and the PMT photo-cathode. Each PMT channel-pad is equipped with the unique diaphragm with its area related to the initial sensitivity of the corresponding channel. We present module/mask construction details, test setup and measurement results done before and after applying of the mask corrections. Applicability of the method is discussed with respect to the instrument dynamic range, low energy threshold requirements and aging effects due to the in-space utilization.