Chang Su Jun

Low noise GHz passive harmonic mode-locking of soliton fiber laser using evanescent wave interaction with carbon nanotubes

Passive harmonic mode-locking in soliton fiber laser is presented with excellent noise characteristics by employing a single-walled carbon nanotubes saturable absorber designed to interact with evanescent wave of the laser field. The 34(th) harmonic mode-locking pulses at 943.16 MHz repetition rate were stably generated with 18 mW output power, >50 dB side-mode suppression and -140 dB/Hz relative intensity noise. Soliton energy control with polarization controller further increased the harmonic order to 61st, 1.692 GHz, but with compromised performance. Scaling to higher-order harmonic mode-locking is discussed for practical application in optical communication system.

Toward higher-order passive harmonic mode-locking of a soliton fiber laser

We report >13 MHz/mW pump power efficiency in increasing the repetition rate of passive harmonic mode-locking by engineering the soliton pulse energy in Er fiber lasers incorporating carbon nanotube saturable absorber. Stable pulses with a ∼5 GHz repetition rate and 40 dB of super-mode suppression are demonstrated with only ∼400 mW pump power in a single-clad fiber laser.

Mode-locking and Q-switching in multi-wavelength fiber ring laser using low frequency phase modulation

We describe experimental investigation of pulsed output from a multi-wavelength fiber ring laser incorporating low frequency phase modulation with large modulation amplitude. The Erbium-doped fiber (EDF) ring laser generated more than 8 wavelength channels with the help of a phase modulator operating at 26.2 kHz and a periodic intra-cavity filter. For most cases, the laser output is pulsed in the form of mode-locking at 5.62 MHz and/or Q-switching at harmonic and sub-harmonic of the phase modulation frequency. Chaotic pulse output is also observed. The behavior of the output pulses are described as functions of pump power and phase modulation amplitude. The relative intensity noise (RIN) value of a single wavelength channel is measured to be under -100 dB/Hz (-140 dB/Hz beyond 1.5 GHz).

Investigation of a four-wave mixing signal generated in fiber-delivered CARS microscopy.

We studied the nonlinear signal generated in the fiber at an anti-Stokes wavelength during the delivery of the picosecond (ps) pump and Stokes beams in coherent anti-Stokes Raman scattering (CARS) microscopy. A small non-phase-matched four-wave mixing (FWM) signal was prevalently observed in the fiber at the power level where other nonlinear processes, including self-phase modulation and cross-phase modulation, were well suppressed. We analyzed the features of the FWM signal generation by varying the location of temporal overlap between two input pulses in the fiber to compare this to the CARS signal generated in the sample. Numerical modeling based on the nonlinear Schrödinger equation was also conducted and clearly explains the results in the experiment. In addition, we experimentally verified the interferometric feature of this FWM signal with the CARS signal by employing a phase-shifting unit, which potentially suggests the use of the FWM signal as a local oscillator for the interferometric CARS system.

Effect of metal coating in all-fiber acousto-optic tunable filter using torsional wave

Torsional mode acousto-optic tunable filter (AOTF) is demonstrated using a metal-coated birefringent optical fiber for an improved robustness. The changes in acoustic and optical properties of a metal-coated birefringent optical fiber induced by the thin metal coating were analyzed experimentally and theoretically. The filter wavelength shift is successfully explained as a result of combined effect of acoustic wavelength change and optical birefringence change. We also demonstrated a small form-factor configuration by coiling the fiber with 6 cm diameter without performance degradation. The center wavelength of the filter can be tuned >35 nm by changing the applied frequency, and the coupling efficiency is higher than 92% with <5 nm 3-dB bandwidth.

4 GHz passive harmonic mode-locking in a single-clad soliton fiber laser incorporating carbon nano-tube saturable absorbers

We demonstrate an efficient increase of repetition rate in passive harmonic mode-locking of fiber lasers by engineering the cavity dispersion. Stable pulses with ~4 GHz repetition rate is obtained with a pump power of 358 mW.

Influence of cavity dispersion on repetition rate of passive harmonic mode-locking soliton fiber laser

The effect of cavity dispersion on the performance of passive harmonic mode-locking of fiber laser is studied. We found that anomalous cavity dispersion near zero could efficiently increase the repetition rate up to several GHz

Passive harmonic mode-locking of fiber laser based on evanescent field interaction with carbon nanotube saturable absorber

We demonstrated harmonically mode-locked soliton laser based on evanescent field interaction of carbon-nanotube saturable absorbers. The repetition rate was 943 MHz at 34th harmonics with super-mode suppression of 60 dB at 18 mW output power.