Charlotte Vermehren

Corticosteroid solubility and lipid polarity control release from solid lipid nanoparticles

Solid lipid nanoparticles (SLN) show promise as a drug delivery system for skin administration. The solid state of the lipid particle enables efficient drug encapsulation and controlled drug release. The present study addresses the influence of lipid composition and drug substance lipid solubility on the in vitro release profile of corticosteroids from SLN for topical administration. Firstly, the effect of lipid composition on the lipid solubility and in vitro release of betamethasone-17-valerate (BMV) was determined by varying the lipid monoglyceride content and the chain length of the fatty acid moiety. Secondly, the effect of drug substance physicochemical properties was determined by studying five different corticosteroid derivatives with different lipophilicity. A high concentration of monoglyceride in SLN increased the amount of BMV released. The corticosteroid release rate depended on the drug substance lipophilicity and it was clear that the release profiles depended on drug partitioning to the aqueous phase as indicated by zero order kinetics. The results emphasize that the corticosteroid solubility in the lipid phase greatly influence drug distribution in the lipid particles and release properties. Thus knowledge of drug substance solubility and lipid polarity contributes to optimize SLN release properties.

Drug delivery by phospholipase A2 degradable liposomes

The effect of poly(ethylene glycol)-phospholipid (PE-PEG) lipopolymers on phospholipase A(2) (PLA(2)) hydrolysis of liposomes composed of stearoyl-oleoylphosphatidylcholine (SOPC) was investigated. The PLA(2) lag-time, which is inversely related to the enzymatic activity, was determined by fluorescence, and the zeta-potentials of the liposomes were measured as a function of PE-PEG lipopolymer concentration. A significant decrease in the lag-time, and hence an increase in enzymatic activity, was observed with increasing amounts of the negatively charged PE-PEG lipopolymers incorporated into the SOPC liposomes. The enhancement of the PLA(2) enzymatic activity might involve a stronger PLA(2) binding affinity towards the negatively charged and polymer covered PEG liposomes.

Secondary structure alterations in insulin and growth hormone water-in-oil emulsions

Water-in-oil (w/o) emulsions have shown a promising release profile of small drug molecules and proteins. However, the major concerns are the structural stability, the retention of the activity and to avoid unwanted immunological reactions caused by the changes in protein structure. In the present study, the secondary structure of insulin and growth hormone is investigated after manufacture of w/o emulsions, using Fourier transform infrared (FTIR) spectroscopy. Initial investigations indicate an altered distribution in the secondary structure elements, e.g. alpha-helix and beta-sheet, measured by area overlap calculations. The changes are more pronounced for growth hormone than for insulin. The overlapping area is 0.93 +/- 0.01 for the emulsion containing insulin manufactured at 0 degrees C and homogenised for 3 min, the corresponding value for growth hormone is 0.83 +/- 0.01. The droplet size changes from 0.27 +/- 0.04 microm in the blank w/o emulsion to 0.79 +/- 0.13 and 0.66 +/- 0.21 microm when insulin or growth hormone is incorporated into the w/o emulsions, respectively.

Increase in phospholipase A2 activity towards lipopolymer-containing liposomes

Phospholipase A2 (PLA2)-catalyzed hydrolysis of dipalmitoylphosphatidylcholine (DPPC) liposomes incorporated with submicellar concentrations of polyethyleneoxide covalently attached to dipalmitoylphosphatidylethanolamine (DPPE-PEG2000) has been studied in the gel-to-fluid transition region of the host DPPC lipid bilayer matrix. By means of fluorescence and light-scattering measurements, the characteristic PLA2 lag time has been determined as a function of lipopolymer concentration and temperature. The degree of lipid hydrolysis was followed using radioactive labeled lipids. Differential scanning calorimetry has been applied to characterize the thermodynamic phase behavior of the lipopolymer-containing liposomes. A remarkable lipopolymer concentration-dependent decrease in the lag time was observed over broad temperature ranges. The radioactive measurements demonstrate an increase in catalytic activity for increasing amounts of lipopolymers in the bilayer. Hence, the lipopolymers act as a promoter of PLA2 lipid hydrolysis resulting in a degradation of the bilayer structure and a concomitant destabilization of the liposomes. This behavior is in contrast to the generally observed protective and stabilization effect in biological fluids exerted by lipopolymers in polymer-grafted liposomes. It is proposed that the enhanced activity of the small water soluble and interfacially active enzyme may involve a non-uniform distribution of the lipopolymers in the lipid matrix due to a coupling between local lipid bilayer curvature and composition of the non-bilayer-preferring lipopolymers.

Formulation and evaluation of release and swelling mechanism of a water-in-oil emulsion using factorial design

Water-in-oil emulsions have a potential as a parenteral prolonged release system for hydrophilic drugs. A consistent challenge when developing an emulsion drug delivery system is to obtain a proper release characteristic of the entrapped drug. The aim of the present study was to study the release mechanism from water-in-oil emulsions. Secondly, to study the effects of droplet size, phase ratio and osmotic pressure on the release rate of glucose from water-in-oil emulsions in a factorial experimental design. The release mechanism of glucose was deduced from the release kinetics of two coentrapped marker molecules, glucose and inulin, with a molecule weight of 180 and 5000 g/mol, respectively. The results indicate that release of glucose was dominated by diffusion through the oily barrier as opposed to membrane rupture. Using statistical methodology, the release rate of glucose could be varied 8 fold in a controlled manner with osmotic pressure as the most important parameter. The osmotic behaviour of the emulsions was further studied in a dynamic swelling study. These results show that the release of entrapped hydrophilic drug can be controlled within certain limits using pharmaceutical formulation principles.

Lipid-based drug delivery systems

The principle objective of formulation of lipid-based drugs is to enhance their bioavailability. The use of lipids in drug delivery is no more a new trend now but is still the promising concept. Lipid-based drug delivery systems (LBDDS) are one of the emerging technologies designed to address challenges like the solubility and bioavailability of poorly water-soluble drugs. Lipid-based formulations can be tailored to meet a wide range of product requirements dictated by disease indication, route of administration, cost consideration, product stability, toxicity, and efficacy. These formulations are also a commercially viable strategy to formulate pharmaceuticals, for topical, oral, pulmonary, or parenteral delivery. In addition, lipid-based formulations have been shown to reduce the toxicity of various drugs by changing the biodistribution of the drug away from sensitive organs. However, the number of applications for lipid-based formulations has expanded as the nature and type of active drugs under investigation have become more varied. This paper mainly focuses on novel lipid-based formulations, namely, emulsions, vesicular systems, and lipid particulate systems and their subcategories as well as on their prominent applications in pharmaceutical drug delivery.

Sustained elevated plasma aprotinin concentration in mice following intraperitoneal injections of w / o emulsions incorporating aprotinin

This study was initiated to test the feasibility of w/o emulsions as a sustained release system for aprotinin following intraperitoneal injection in mice. The emulsion was well tolerated in mice and sustained release was observed over a period of 96 h. The time for maximum plasma concentration of aprotinin was 10 min and 12 h after injection of a control solution and the emulsion dosage form, respectively. Furthermore, the hemolytic activity of the emulsion constituents was low indicating a low acute toxicological potential of the emulsion. The present study also showed that the lipolytic activity in peritoneal exudate from mice is important for the clearance of oily vehicles from the peritoneal cavity with lipolytic rate constants ranging from 50 to 130 nmol free fatty acid released/min/mg exudate protein at 37 degrees C, pH 8.5. It was concluded that the w/o emulsion was well suited to provide sustained elevated plasma aprotinin concentrations in mice.

Parenteral water/oil emulsions containing hydrophilic compounds with enhanced in vivo retention: formulation, rheological characterisation and study of in vivo fate using whole body gamma-scintigraphy

The preparation and characterization of parenteral water-in-oil (w/o) emulsions with a potential for sustained release of hydrophilic drugs was described with emphasis on rheological behaviour and spreading phenomenon after intramuscular (i.m.) injection in rabbit thigh muscle. Both steady state and dynamic rheological parameters were investigated showing Newtonian behaviour at low fraction of disperse phase ratio as opposed to viscoelastic and pseudoplastic behaviour at high fraction of disperse phase. Disappearance and spreading behaviour of hydrophilic radioactive markers, aprotinin (6512 g/mol) and pertechnetate (193 g/mol) entrapped in w/o emulsions from an i.m. injection site was studied by whole body gamma-scintigraphy. The retention of entrapped aprotinin 24 h postinjection was 83 +/- 5% for a low spreading emulsion and 76 +/- 6% for a high spreading emulsion. The corresponding values for pertechnetate were 50 +/- 11 and 23 +/- 2%, respectively. The relatively long retention times were suggested to be related to the good physical stability properties of the present emulsions. It was concluded that the presented w/o emulsions are promising vehicles for sustained release of hydrophilic drugs from an i.m. injection site.

Targeting of liposome-associated calcipotriol to the skin: effect of liposomal membrane fluidity and skin barrier integrity.

Many dermal diseases like psoriasis are characterized by major changes in skin barrier function, which challenge the reproducible delivery of drugs into specific layers of diseased skin. The purpose of this study was to elucidate how liposomal bilayer fluidity and barrier integrity affected the delivery of liposome-associated calcipotriol to the skin. Calcipotriol-containing gel state and liquid state dipalmitoylphosphatidyl-choline:dilauroylphosphatidylcholine liposomes were prepared by extrusion. Using Langmuir monolayers, calcipotriol was shown to affect the packing of the lipid membrane. The penetration of radioactively labeled lipid and calcipotriol into pig skin was examined using the Franz diffusion cell model, and tape stripping was applied to impose an impaired barrier. Distorting the skin barrier resulted in an enhanced penetration of lipid from both gel and liquid state liposomes. In addition, increased penetration of lipid from liquid state liposomes was observed compared to gel state liposomes into barrier-impaired skin. For barrier-impaired skin, an elevated calcipotriol-to-lipid ratio was found in the receptor fluid for both liposome compositions indicating that calcipotriol is released from the vesicles. This suggests that the liposome-mediated delivery of calcipotriol to the epidermis of diseased skin is affected by the fluidity of the liposomal membrane.

Interaction of a lipid-membrane destabilizing enzyme with PEG-liposomes.

Polymer grafted PEG-liposomes have come into use as drug-delivery systems with improved therapeutic profiles. However, very little is known about the morphological instability of PEG-liposomes due to enzymatic degradation. To gain further insight into the effect of PEG lipopolymer-concentration on the catalytic activity of a liposome-degrading enzyme, phospholipase A2 (PLA2)-catalyzed phospholipid hydrolysis of PEG-liposomes has been investigated. The temperature dependence of the PLA2 lag-time, denoting the time required before a sudden increase in enzymatic activity takes place, has been determined for submicellar amounts of dipalmitoylphosphatidylethanolaminyl-poly-(ethylene glycol) (DPPE-PEG2000) incorporated into unilamellar dipalmitoylphosphatidylcholine (DPPC)-liposomes. The measurements demonstrate a significant reduction in the lag-time over broad temperature ranges. The results suggest that a close relationship exists between PLA2 catalyzed lipid hydrolysis and lipid-membrane composition, which moreover is of major importance for the overall morphological stability and the release of encapsulated material from the polymer-grafted PEG-liposomes.