Congli He

Strain-induced modulation of perpendicular magnetic anisotropy in Ta/CoFeB/MgO structures investigated by ferromagnetic resonance

We demonstrate strain-induced modulation of perpendicular magnetic anisotropy (PMA) in (001)-oriented [Pb(Mg1/3Nb2/3)O3](1−x)-[PbTiO3]x (PMN-PT) substrate/Ta/CoFeB/MgO/Ta structures using ferromagnetic resonance (FMR). An in-plane biaxial strain is produced by applying voltage between the two surfaces of the PMN-PT substrate, and is transferred to the ferromagnetic CoFeB layer, which results in tuning of the PMA of the CoFeB layer. The strain-induced change in PMA is quantitatively extracted from the experimental FMR spectra. It is shown that both first and second-order anisotropy terms are affected by the electric field, and that they have opposite voltage dependencies. A very large value of the voltage-induced perpendicular magnetic anisotropy modulation of ∼7000 fJ/V·m is obtained through this strain-mediated coupling. Using this FMR technique, the magnetostriction coefficient λ is extracted for the ultrathin 1.1 nm Co20Fe60B20 layer, and is found to be 3.7 × 10−5, which is approximately 4 times larger...

Room-Temperature Skyrmion Shift Device for Memory Application

Magnetic skyrmions are intensively explored for potential applications in ultralow-energy data storage and computing. To create practical skyrmionic memory devices, it is necessary to electrically create and manipulate these topologically protected information carriers in thin films, thus realizing both writing and addressing functions. Although room-temperature skyrmions have been previously observed, fully electrically controllable skyrmionic memory devices, integrating both of these functions, have not been developed to date. Here, we demonstrate a room-temperature skyrmion shift memory device, where individual skyrmions are controllably generated and shifted using current-induced spin-orbit torques. Particularly, it is shown that one can select the device operation mode in between (i) writing new single skyrmions or (ii) shifting existing skyrmions by controlling the magnitude and duration of current pulses. Thus, we electrically realize both writing and addressing of a stream of skyrmions in the device. This prototype demonstration brings skyrmions closer to real-world computing applications.

Current-driven perpendicular magnetization switching in Ta/CoFeB/(TaOx or MgO/TaOx) films with lateral structural asymmetry

We study the current-driven perpendicular magnetization switching in Ta/CoFeB(wedge)/[TaOx or MgO/TaOx] devices with a lateral structural asymmetry introduced by a varying CoFeB thickness. In these devices, an in-plane current can generate a field-like torque and its corresponding effective magnetic field ( HzFL) is out-of-plane, which can deterministically switch perpendicular magnetization at zero magnetic field. Experimental results indicate that the method used for breaking lateral structural symmetry greatly affects the resulting field-like torque, and that the gradient of perpendicular anisotropy, resulting from the CoFeB thickness variation, is not by itself sufficient to give rise to the current-induced HzFL. Analysis of the oxidation gradient at the CoFeB/TaOx interface indicates that the oxidation gradient may play a more important role than the gradient of magnetic anisotropy for the generation of HzFL. For practical applications, the demonstration of perpendicular magnetization switching in Ta...

Spin-orbit torques in perpendicularly magnetized Ir22Mn78/Co20Fe60B20/MgO multilayer

The current-induced spin-orbit torques (SOTs) in the perpendicularly magnetized Ir22Mn78/Co20Fe60B20/MgO structures are investigated. The damping- and field-like torques are characterized using a harmonic technique. The spin Hall angle of Ir22Mn78 is determined to be θSHE = +0.057 ± 0.002. The SOT-driven magnetization switching is also demonstrated with the assistance of an external in-plane field. Furthermore, the magneto-optical Kerr effect imaging experiments show that the magnetization switching is realized through domain nucleation and domain wall motion. These results may promise potential practical applications in high-performance SOT devices based on the antiferromagnetic materials.

Spin-torque ferromagnetic resonance measurements utilizing spin Hall magnetoresistance in W/Co40Fe40B20/MgO structures

We study the magnetic properties of W/Co40Fe40B20 (CoFeB)/MgO films using the spin-torque ferromagnetic resonance (ST-FMR) technique. This study takes the advantage of the spin Hall magnetoresistance (SMR) for generating an oscillating resistance, which is one of the necessary requirements for obtaining mixing voltage in the ST-FMR technique. We have measured both the as-grown and the annealed samples with different CoFeB layer thicknesses, which include the in-plane and out-of-plane magnetic anisotropies. The spectra for these two types of anisotropies show distinct signatures. By analyzing the ST-FMR spectra, we extract the effective anisotropy field for both types of samples. In addition, we investigate the influence of CoFeB thickness and annealing on the Gilbert damping constant. Our experiments show that by taking advantage of SMR, the ST-FMR measurement acts as an effective tool with high sensitivity for studying the magnetic properties of ultrathin magnetic films.

Competing effect of spin-orbit torque terms on perpendicular magnetization switching in structures with multiple inversion asymmetries.

Current-induced spin-orbit torques (SOTs) in structurally asymmetric multilayers have been used to efficiently manipulate magnetization. In a structure with vertical symmetry breaking, a damping-like SOT can deterministically switch a perpendicular magnet, provided an in-plane magnetic field is applied. Recently, it has been further demonstrated that the in-plane magnetic field can be eliminated by introducing a new type of perpendicular field-like SOT via incorporating a lateral structural asymmetry into the device. Typically, however, when a current is applied to such devices with combined vertical and lateral asymmetries, both the perpendicular field-like torque and the damping-like torque coexist, hence jointly affecting the magnetization switching behavior. Here, we study perpendicular magnetization switching driven by the combination of the perpendicular field-like and the damping-like SOTs, which exhibits deterministic switching mediated through domain wall propagation. It is demonstrated that the role of the damping-like SOT in the deterministic switching is highly dependent on the magnetization direction in the domain wall. By contrast, the perpendicular field-like SOT is solely determined by the relative orientation between the lateral structural asymmetry and the current direction, regardless of the magnetization direction in the domain wall. The experimental results further the understanding of SOTs-induced switching, with implications for spintronic devices.

Versatile Fabrication of Self-Aligned Nanoscale Hall Devices Using Nanowire Masks

In this work, we present an ingenious method to fabricate self-aligned nanoscale Hall devices using chemically synthesized nanowires as both etching and deposition masks. This versatile method can be extensively used to make nanoribbons out of arbitrary thin films without the need for extremely high alignment accuracy to define the metal contacts. The fabricated nanoribbon width scales with the mask nanowire width (diameter), and it can be easily reduced down to tens of nanometers. The self-aligned metal contacts from the sidewall extend to the top surface of the nanoribbon, and the overlap can be controlled by tuning the deposition recipe. To demonstrate the feasibility, we have fabricated Ta/CoFeB/MgO nanoribbons sputtered on a SiO2/Si substrate with different metal contacts, using synthesized SnO2 nanowires as masks. Anomalous Hall effect measurements have been carried out on the fabricated nanoscale Hall device in order to study the current-induced magnetization switching in the nanoscale heavy metal/ferromagnet heterostructure, which has shown distinct switching behaviors from micron-scale devices. The developed method provides a useful fabrication platform to probe the charge and spin transport in the nanoscale regime.

Room-Temperature Skyrmions in an Antiferromagnet-Based Heterostructure

Magnetic skyrmions as swirling spin textures with a nontrivial topology have potential applications as magnetic memory and storage devices. Since the initial discovery of skyrmions in non-centrosymmetric B20 materials, the recent effort has focused on exploring room-temperature skyrmions in heavy metal and ferromagnetic heterostructures, a material platform compatible with existing spintronic manufacturing technology. Here, we report the surprising observation that a room-temperature skyrmion phase can be stabilized in an entirely different class of systems based on antiferromagnetic (AFM) metal and ferromagnetic (FM) metal IrMn/CoFeB heterostructures. There are a number of distinct advantages of exploring skyrmions in such heterostructures including zero-field stabilization, tunable antiferromagnetic order, and sizable spin-orbit torque (SOT) for energy-efficient current manipulation. Through direct spatial imaging of individual skyrmions, quantitative evaluation of the interfacial Dzyaloshinskii-Moriya interaction, and demonstration of current-driven skyrmion motion, our findings firmly establish the AFM/FM heterostructures as a promising material platform for exploring skyrmion physics and device applications.

Role of dimensional crossover on spin-orbit torque efficiency in magnetic insulator thin films

Magnetic insulators (MIs) attract tremendous interest for spintronic applications due to low Gilbert damping and the absence of Ohmic loss. Spin-orbit torques (SOTs) on MIs are more intriguing than magnetic metals since SOTs cannot be transferred to MIs through direct injection of electron spins. Understanding of SOTs on MIs remains elusive, especially how SOTs scale with the MI film thickness. Here, we observe the critical role of dimensionality on the SOT efficiency by studying the MI layer thickness-dependent SOT efficiency in tungsten/thulium iron garnet (W/TmIG) bilayers. We show that the TmIG thin film evolves from two-dimensional to three-dimensional magnetic phase transitions as the thickness increases. We report the significant enhancement of the measured SOT efficiency as the TmIG thickness increases, which is attributed to the increase of the magnetic moment density. We demonstrate the current-induced SOT switching in the W/TmIG bilayers with a TmIG thickness up to 15 nm.The spin-orbit torque (SOT) induced magnetic switching makes metal/magnetic insulators bilayers preferred in the energy efficient spintronic applications. Here the authors show SOT switching in W/TmIG bilayers and reveal the dimension crossover of SOT as a function of TmIG thickness.

Room-temperature skyrmion shift device for memory application (Conference Presentation)

Magnetic skyrmions are intensively explored for potential applications in ultralow-energy data storage and computing. To create practical skyrmionic memory devices, it is necessary to electrically create and manipulate these topologically-protected information carriers in thin films, thus realizing both writing and addressing functions. Although room-temperature skyrmions have been previously observed, fully electrically controllable skyrmionic memory devices, integrating both of these functions, have not been developed to date. In this talk, I will talk about our recent demonstration of a room-temperature skyrmion shift memory device, where individual skyrmions are controllably generated and shifted using current-induced spin-orbit torques. Particularly, it is shown that one can select the device operation mode in between: (i) writing new single skyrmions, or (ii) shifting existing skyrmions, by controlling the magnitude and duration of current pulses. Thus, we electrically realize both writing and addressing of a stream of skyrmions in the device. This prototype demonstration brings skyrmions closer to real-world computing applications.