Network


Latest external collaboration on country level. Dive into details by clicking on the dots.

Hotspot


Dive into the research topics where Devis Bellucci is active.

Publication


Featured researches published by Devis Bellucci.


Journal of Chemical Physics | 2006

Full configuration interaction approach to the few-electron problem in artificial atoms

Massimo Rontani; Carlo Cavazzoni; Devis Bellucci; Guido Goldoni

We present a new high performance configuration interaction code optimally designed for the calculation of the lowest-energy eigenstates of a few electrons in semiconductor quantum dots (also called artificial atoms) in the strong interaction regime. The implementation relies on a single-particle representation, but it is independent of the choice of the single-particle basis and, therefore, of the details of the device and configuration of external fields. Assuming no truncation of the Fock space of Slater determinants generated from the chosen single-particle basis, the code may tackle regimes where Coulomb interaction very effectively mixes many determinants. Typical strongly correlated systems lead to very large diagonalization problems; in our implementation, the secular equation is reduced to its minimal rank by exploiting the symmetry of the effective-mass interacting Hamiltonian, including square total spin. The resulting Hamiltonian is diagonalized via parallel implementation of the Lanczos algorithm. The code gives access to both wave functions and energies of first excited states. Excellent code scalability in a parallel environment is demonstrated; accuracy is tested for the case of up to eight electrons confined in a two-dimensional harmonic trap as the density is progressively diluted up to the Wigner regime, where correlations become dominant. Comparison with previous quantum Monte Carlo simulations in the Wigner regime demonstrates power and flexibility of the method.


Surface Engineering | 2011

Bioactive glass coatings: a review

Antonella Sola; Devis Bellucci; Andrea Cattini

Abstract Bioactive glasses, discovered by Hench and co-workers at the end of the 1960s, are among the most promising biomaterials for bone repair and reconstruction, mainly thanks to their high bioactivity index. Unfortunately, due to their brittleness and relatively poor mechanical properties, their clinical applications are limited to non-load bearing implants. However, bioactive glasses can be successfully employed as coatings on bioinert metallic substrates, in order to combine high bioactivity with mechanical strength. After a brief introduction to the main properties of biomaterials and bioactive glasses, the present paper provides an overview of the different approaches and available techniques to realise bioactive glass coatings, with a particular emphasis on thermal spray, which is nowadays one of the most popular coating procedures.


Materials Science and Engineering: C | 2013

A new hydroxyapatite-based biocomposite for bone replacement

Devis Bellucci; Antonella Sola; Matteo Gazzarri; Federica Chiellini

Since the 1970s, various types of ceramic, glass and glass-ceramic materials have been proposed and used to replace damaged bone in many clinical applications. Among them, hydroxyapatite (HA) has been successfully employed thanks to its excellent biocompatibility. On the other hand, the bioactivity of HA and its reactivity with bone can be improved through the addition of proper amounts of bioactive glasses, thus obtaining HA-based composites. Unfortunately, high temperature treatments (1200°C÷1300°C) are usually required in order to sinter these systems, causing the bioactive glass to crystallize into a glass-ceramic and hence inhibiting the bioactivity of the resulting composite. In the present study novel HA-based composites are realized and discussed. The samples can be sintered at a relatively low temperature (800 °C), thanks to the employment of a new glass (BG_Ca) with a reduced tendency to crystallize compared to the widely used 45S5 Bioglass®. The rich glassy phase, which can be preserved during the thermal treatment, has excellent effects in terms of in vitro bioactivity; moreover, compared to composites based on 45S5 Bioglass® having the same HA/glass proportions, the samples based on BG_Ca displayed an earlier response in terms of cell proliferation.


Biotechnology Advances | 2016

Functionally graded materials for orthopedic applications – an update on design and manufacturing

Antonella Sola; Devis Bellucci

Functionally graded materials (FGMs) are innovative materials whose composition and/or microstructure gradually vary in space according to a designed law. As a result, also the properties gradually vary in space, so as to meet specific non-homogeneous service requirements without any abrupt interface at the macroscale. FGMs are emerging materials for orthopedic prostheses, since the functional gradient can be adapted to reproduce the local properties of the original bone, which helps to minimize the stress shielding effect and, at the same time, to reduce the shear stress between the implant and the surrounding bone tissue, two critical prerequisites for a longer lifespan of the graft. After a brief introduction to the origin of the FGM concept, the review surveys some representative examples of graded systems which are present in nature and, in particular, in the human body, with a focus on bone tissue. Then the rationale for using FGMs in orthopedic devices is discussed more in detail, taking into account both biological and biomechanical requirements. The core of the paper is dedicated to two fundamental topics, which are essential to benefit from the use of FGMs for orthopedic applications, namely (1) the computational tools for materials design and geometry optimization, and (2) the manufacturing techniques currently available to produce FGM-based grafts. This second part, in its turn, is structured to consider the production of functionally graded coatings (FGCs), of functionally graded 3D parts, and of special devices with a gradient in porosity (functionally graded scaffolds). The inspection of the literature on the argument clearly shows that the integration of design and manufacturing remains a critical step to overpass in order to achieve effective FGM-based implants.


Materials Science and Engineering: C | 2014

Suspension thermal spraying of hydroxyapatite: microstructure and in vitro behaviour.

Giovanni Bolelli; Devis Bellucci; Luca Lusvarghi; Antonella Sola; N. Stiegler; Philipp Müller; Andreas Killinger; Rainer Gadow; Lina Altomare; Luigi De Nardo

In cementless fixation of metallic prostheses, bony ingrowth onto the implant surface is often promoted by osteoconductive plasma-sprayed hydroxyapatite coatings. The present work explores the use of the innovative High Velocity Suspension Flame Spraying (HVSFS) process to coat Ti substrates with thin homogeneous hydroxyapatite coatings. The HVSFS hydroxyapatite coatings studied were dense, 27-37μm thick, with some transverse microcracks. Lamellae were sintered together and nearly unidentifiable, unlike conventional plasma-sprayed hydroxyapatite. Crystallinities of 10%-70% were obtained, depending on the deposition parameters and the use of a TiO2 bond coat. The average hardness of layers with low (<24%) and high (70%) crystallinity was ≈3.5GPa and ≈4.5GPa respectively. The distributions of hardness values, all characterised by Weibull modulus in the 5-7 range, were narrower than that of conventional plasma-sprayed hydroxyapatite, with a Weibull modulus of ≈3.3. During soaking in simulated body fluid, glassy coatings were progressively resorbed and replaced by a new, precipitated hydroxyapatite layer, whereas coatings with 70% crystallinity were stable up to 14days of immersion. The interpretation of the precipitation behaviour was also assisted by surface charge assessments, performed through Z-potential measurements. During in vitro tests, HA coatings showed no cytotoxicity towards the SAOS-2 osteoblast cell line, and surface cell proliferation was comparable with proliferation on reference polystyrene culture plates.


Journal of Biomedical Materials Research Part A | 2012

Heat treatment of Na2O-CaO-P2O5-SiO2 bioactive glasses: Densification processes and postsintering bioactivity †

Antonella Sola; Devis Bellucci; Maria Grazia Raucci; Stefania Zeppetelli; Luigi Ambrosio

Because of their excellent bioactivity, bioactive glasses are increasingly diffused to produce biomedical devices for bone prostheses, to face the dysfunctions that may be caused by traumatic events, diseases, or even natural aging. However, several processing routes, such as the production of scaffolds or the deposition of coatings, include a thermal treatment to apply or sinter the glass. The exposure to high temperature may induce a devetrification phenomenon, altering the properties and, in particular, the bioactivity of the glass. The present contribution offers an overview of the thermal behavior and properties of two glasses belonging to the Na2O-CaO-P2O5-SiO2 system, to be compared to the standard 45S5 Bioglass(®). The basic goal is to understand the effect of both the original composition and the thermal treatment on the performance of the sintered glasses. The new glasses, the one (BG_Na) with a high content of Na2O, the other (BG_Ca) with a high content of CaO, were fully characterized and sintering tests were performed to define the most interesting firing cycles. The sintered samples, treated at 880°C and 800°C respectively, were investigated from a microstructural point of view and their mechanical properties were compared to those of the bulk (not sintered) glass counterparts. The effect of sintering was especially striking on the BG_Ca material, whose Vickers hardness increased from 598.9 ± 46.7 HV to 1053.4 ± 35.0 HV. The in vitro tests confirmed the ability of the glasses, both in bulk and sintered form, of generating a hydroxyapatite surface layer when immersed in a simulated body fluid. More accurate biological tests performed on the sintered glasses proved the high bioactivity of the CaO-rich composition even after a heat treatment.


Materials Science and Engineering: C | 2015

Bioactive glass/hydroxyapatite composites: mechanical properties and biological evaluation.

Devis Bellucci; Antonella Sola; Alexandre Anesi; Roberta Salvatori; L. Chiarini

Bioactive glass/hydroxyapatite composites for bone tissue repair and regeneration have been produced and discussed. The use of a recently developed glass, namely BG_Ca/Mix, with its low tendency to crystallize, allowed one to sinter the samples at a relatively low temperature thus avoiding several adverse effects usually reported in the literature, such as extensive crystallization of the glassy phase, hydroxyapatite (HA) decomposition and reaction between HA and glass. The mechanical properties of the composites with 80wt.% BG_Ca/Mix and 20wt.% HA are sensibly higher than those of Bioglass® 45S5 reference samples due to the presence of HA (mechanically stronger than the 45S5 glass) and to the thermal behaviour of the BG_Ca/Mix, which is able to favour the sintering process of the composites. Biocompatibility tests, performed with murine fibroblasts BALB/3T3 and osteocites MLO-Y4 throughout a multi-parametrical approach, allow one to look with optimism to the produced composites, since both the samples themselves and their extracts do not induce negative effects in cell viability and do not cause inhibition in cell growth.


Journal of The Mechanical Behavior of Biomedical Materials | 2015

Composite scaffolds for controlled drug release: role of the polyurethane nanoparticles on the physical properties and cell behaviour

Piergiorgio Gentile; Devis Bellucci; Antonella Sola; Clara Mattu; Gianluca Ciardelli

Localised delivery of appropriate biomolecule/drug(s) can be suitable to prevent postoperative infections and inflammation after scaffold implantation in vivo. In this study composite shell scaffolds, based on an internally produced bioactive glass and a commercial hydroxyapatite, were surface coated with a uniform polymeric layer, embedded with thermo-stable polyesterurethane (PU)-based nanoparticles (NPs), containing an anti-inflammatory drug (indomethacin; IDCM). The obtained functionalised scaffolds were subjected to physico-mechanical and biological characterisations. The results indicated that NPs incorporation into the gelatin coating of the composite scaffolds: 1) not changed significantly the micro-architecture of the scaffolds in terms of mean pore diameter and pore size distribution; 2) increased the compressive modulus; and 3) allowed to a sustained IDMC release (65-70% of the loaded-drug) within the first week of incubation in physiological solution. On the other hand, the NPs incorporation did not affect the biocompatibility of composite scaffolds, as evidenced by viability and alkaline phosphatase (ALP) activity of MG63 human osteoblast-like cells.


Materials | 2011

A New Highly Bioactive Composite for Scaffold Applications: A Feasibility Study

Devis Bellucci; Antonella Sola

Hydroxyapatite (HA) has been widely investigated as scaffolding material for bone tissue engineering, mainly for its excellent biocompatibility. Presently, there is an increasing interest in the composites of hydroxyapatite with bioactive glasses, with the aim to obtain systems with improved bioactivity or mechanical properties. Moreover, modifying the ratio between bioactive glass and hydroxyapatite results in the possibility of controlling the reaction rate of the composite scaffold in the human body. However, high temperature treatments are usually required in order to sinter HA-based composites, causing the bioactive glass to crystallize into a glass-ceramic, with possible negative effects on its bioactivity. In the present research work, a glass composition belonging to the Na2O-CaO-P2O5-SiO2 system, with a reduced tendency to crystallize, is applied to realize HA-based composites. The novel samples can be sintered at a relative low temperature (750 °C) compared to the widely studied HA/45S5 Bioglass® composites. This fact greatly helps to preserve the amorphous nature of the glass, with excellent effects in terms of bioactivity, according to in vitro tests. As a first application, the obtained composites are also tested to realize highly porous scaffolds by means of the standard burning out method.


Materials Science and Engineering: C | 2014

Sol-gel derived bioactive glasses with low tendency to crystallize: synthesis, post-sintering bioactivity and possible application for the production of porous scaffolds.

Devis Bellucci; Antonella Sola; Roberta Salvatori; Alexandre Anesi; L. Chiarini

A new sol-gel (SG) method is proposed to produce special bioactive glasses (BG_Ca family) characterized by a low tendency to devitrify. These formulations, derived from 45S5 Bioglass®, are characterized by a high content of CaO (45.6 mol%) and by a partial or complete substitution of sodium oxide with potassium oxide (total amount of alkaline oxides: 4.6 mol%), which increases the crystallization temperature up to 900°C. In this way, it is possible to produce them by SG preserving their amorphous nature, in spite of the calcination at 850°C. The sintering behavior of the obtained SG powders is thoroughly investigated and the properties of the sintered bodies are compared to those of the melt-derived (M) counterparts. Furthermore, the SG glass powders are successfully used to produce scaffolds by means of a modified replication technique based on the combined use of polyurethane sponges and polyethylene particles. Finally, in the view of a potential application for bone tissue engineering, the cytotoxicity of the produced materials is evaluated in vitro.

Collaboration


Dive into the Devis Bellucci's collaboration.

Top Co-Authors

Avatar

Antonella Sola

University of Modena and Reggio Emilia

View shared research outputs
Top Co-Authors

Avatar

Guido Goldoni

University of Modena and Reggio Emilia

View shared research outputs
Top Co-Authors

Avatar

Elisa Molinari

University of Modena and Reggio Emilia

View shared research outputs
Top Co-Authors

Avatar

Giovanni Bolelli

University of Modena and Reggio Emilia

View shared research outputs
Top Co-Authors

Avatar

Luca Lusvarghi

University of Modena and Reggio Emilia

View shared research outputs
Top Co-Authors

Avatar

Andrea Cattini

University of Modena and Reggio Emilia

View shared research outputs
Top Co-Authors

Avatar

Massimo Rontani

University of Modena and Reggio Emilia

View shared research outputs
Top Co-Authors

Avatar

Filippo Troiani

Autonomous University of Madrid

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar

Rainer Gadow

University of Stuttgart

View shared research outputs
Researchain Logo
Decentralizing Knowledge