Dongku Kim

Three-terminal single-molecule junctions formed by mechanically controllable break junctions with side gating.

Molecules are promising candidates for electronic device components because of their small size, chemical tunability, and ability to self-assemble. A major challenge when building molecule-based electronic devices is forming reliable molecular junctions and controlling the electrical current through the junctions. Here, we report a three-terminal junction that combines both the ability to form a stable single-molecule junction via the mechanically controllable break junction (MCBJ) technique and the ability to shift the energy levels of the molecule by gating. Using a noncontact side-gate electrode located a few nanometers away from the molecular junction, the conductance of the molecule could be dramatically modulated because the electrical field applied to the molecular junction from the side gate changed the molecular electronic structure, as confirmed by the ab initio calculations. Our study will provide a new design for mechanically stable single-molecule transistor junctions fabricated by the MCBJ method.

Gate-bias stress-dependent photoconductive characteristics of multi-layer MoS2 field-effect transistors

We investigated the photoconductive characteristics of molybdenum disulfide (MoS2) field-effect transistors (FETs) that were fabricated with mechanically exfoliated multi-layer MoS2 flakes. Upon exposure to UV light, we observed an increase in the MoS2 FET current because of electron-hole pair generation. The MoS2 FET current decayed after the UV light was turned off. The current decay processes were fitted using exponential functions with different decay characteristics. Specifically, a fast decay was used at the early stages immediately after turning off the light to account for the exciton relaxation, and a slow decay was used at later stages long after turning off the light due to charge trapping at the oxygen-related defect sites on the MoS2 surface. This photocurrent decay phenomenon of the MoS2 FET was influenced by the measurement environment (i.e., vacuum or oxygen environment) and the electrical gate-bias stress conditions (positive or negative gate biases). The results of this study will enhance the understanding of the influence of environmental and measurement conditions on the optical and electrical properties of MoS2 FETs.

The application of orthogonal photolithography to micro-scale organic field effect transistors and complementary inverters on flexible substrate

Micro-scale pentacene organic field effect transistors (OFETs) were fabricated on a flexible poly(ethylene terephthalate) (PET) substrate. By applying a highly fluorinated developing solvents and its compatible photoresist materials, it has become possible to make the micro-scale patterning for organic devices using standard photolithography without damaging the underlying polymer layers. The flexible pentacene OFETs with 3 μm-sized channel length exhibited stable electrical characteristics under bent configurations and under a large number of repetitive bending cycles. Furthermore, we demonstrated micro-scale organic complementary inverters on a flexible PET substrate using p-type pentacene and n-type copper hexadecafluorophthalocyanine materials.

High-Yield Functional Molecular Electronic Devices

An ultimate goal of molecular electronics, which seeks to incorporate molecular components into electronic circuit units, is to generate functional molecular electronic devices using individual or ensemble molecules to fulfill the increasing technical demands of the miniaturization of traditional silicon-based electronics. This review article presents a summary of recent efforts to pursue this ultimate aim, covering the development of reliable device platforms for high-yield ensemble molecular junctions and their utilization in functional molecular electronic devices, in which distinctive electronic functionalities are observed due to the functional molecules. In addition, other aspects pertaining to the practical application of molecular devices such as manufacturing compatibility with existing complementary metal-oxide-semiconductor technology, their integration, and flexible device applications are also discussed. These advances may contribute to a deeper understanding of charge transport characteristics through functional molecular junctions and provide a desirable roadmap for future practical molecular electronics applications.

Anomalous magnetic properties and non-Fermi-liquid behaviour in single crystals of the Kondo lattice CeNiGe2−xSix

We report on the magnetic susceptibility, specific heat and electrical resistivity of the heavy fermion compounds CeNiGe2−xSix (). Compounds with x<1 show antiferromagnetic order, which with increasing x shifts toward lower temperature owing to increased exchange coupling between the localized 4f magnetic moments and conduction electrons. Eventually, the magnetic order almost becomes absent, for x = 1. An anomaly observed in the specific heat is well interpreted by the Kondo model for a degenerate impurity spin J = 1/2 in the Coqblin–Schrieffer limit. A coherence peak indicative of the formation of a Kondo lattice is found in the electrical resistivity, whose features are consistent with the results for the specific heat. Interestingly, there is a significant deviation from Fermi-liquid behaviour at the critical concentration x = 1. This deviation is attributed to a quantum phase transition in a model with two-dimensional antiferromagnetic fluctuations.

Investigation of inelastic electron tunneling spectra of metal-molecule-metal junctions fabricated using direct metal transfer method

We measured the inelastic electron tunneling spectroscopy (IETS) characteristics of metal-molecule-metal junctions made with alkanethiolate self-assembled monolayers. The molecular junctions were fabricated using a direct metal transfer method, which we previously reported for high-yield metal-molecule-metal junctions. The measured IETS data could be assigned to molecular vibration modes that were determined by the chemical structure of the molecules. We also observed discrepancies and device-to-device variations in the IETS data that possibly originate from defects in the molecular junctions and insulating walls introduced during the fabrication process and from the junction structure.

Electrical characterization of benzenedithiolate molecular electronic devices with graphene electrodes on rigid and flexible substrates

We investigated the electrical characteristics of molecular electronic devices consisting of benzenedithiolate self-assembled monolayers and a graphene electrode. We used the multilayer graphene electrode as a protective interlayer to prevent filamentary path formation during the evaporation of the top electrode in the vertical metal-molecule-metal junction structure. The devices were fabricated both on a rigid SiO2/Si substrate and on a flexible poly(ethylene terephthalate) substrate. Using these devices, we investigated the basic charge transport characteristics of benzenedithiolate molecular junctions in length- and temperature-dependent analyses. Additionally, the reliability of the electrical characteristics of the flexible benzenedithiolate molecular devices was investigated under various mechanical bending conditions, such as different bending radii, repeated bending cycles, and a retention test under bending. We also observed the inelastic electron tunneling spectra of our fabricated graphene-electrode molecular devices. Based on the results, we verified that benzenedithiolate molecules participate in charge transport, serving as an active tunneling barrier in solid-state graphene-electrode molecular junctions.

A new approach for high-yield metal-molecule-metal junctions by direct metal transfer method.

The realization of high-yield, stable molecular junctions has been a long-standing challenge in the field of molecular electronics research, and it is an essential prerequisite for characterizing and understanding the charge transport properties of molecular junctions prior to their device applications. Here, we introduce a new approach for obtaining high-yield, vertically structured metal-molecule-metal junctions in which the top metal electrodes are formed on alkanethiolate self-assembled monolayers by a direct metal transfer method without the use of any additional protecting interlayers in the junctions. The fabricated alkanethiolate molecular devices exhibited considerably improved device yields (∼70%) in comparison to the typical low device yields (less than a few %) of molecular junctions in which the top metal electrodes are fabricated using the conventional evaporation method. We compared our method with other molecular device fabrication methods in terms of charge transport parameters. This study suggests a potential new device platform for realizing robust, high-yield molecular junctions and investigating the electronic properties of devices.

Statistical investigation of the length-dependent deviations in the electrical characteristics of molecular electronic junctions fabricated using the direct metal transfer method

We fabricated and analyzed the electrical transport characteristics of vertical type alkanethiolate molecular junctions using the high-yield fabrication method that we previously reported. The electrical characteristics of the molecular electronic junctions were statistically collected and investigated in terms of current density and transport parameters based on the Simmons tunneling model, and we determined representative current-voltage characteristics of the molecular junctions. In particular, we examined the statistical variations in the length-dependent electrical characteristics, especially the Gaussian standard deviation σ of the current density histogram. From the results, we found that the magnitude of the σ value can be dependent on the individual molecular length due to specific microscopic structures in the molecular junctions. The probable origin of the molecular length-dependent deviation of the electrical characteristics is discussed.

Gate-dependent asymmetric transport characteristics in pentacene barristors with graphene electrodes

We investigated the electrical characteristics and the charge transport mechanism of pentacene vertical hetero-structures with graphene electrodes. The devices are composed of vertical stacks of silicon, silicon dioxide, graphene, pentacene, and gold. These vertical heterojunctions exhibited distinct transport characteristics depending on the applied bias direction, which originates from different electrode contacts (graphene and gold contacts) to the pentacene layer. These asymmetric contacts cause a current rectification and current modulation induced by the gate field-dependent bias direction. We observed a change in the charge injection barrier during variable-temperature current-voltage characterization, and we also observed that two distinct charge transport channels (thermionic emission and Poole-Frenkel effect) worked in the junctions, which was dependent on the bias magnitude.