F. Karger

Experiments to test an intra-island scoop limiter on TEXT☆

Abstract An instrumented scoop limiter probe is being operated on TEXT to test the concept of limiter cooling and improved particle removal efficiencies using an externally-applied resonant magnetic field perturbation (the resonant helical divertor concept). Cooling of the limiter face has been demonstrated for limiter positions ranging from r L = 29.0 cm inward to r L = 25.5 cm (the Text primary poloidal hoop limiter radius r a = 27.0 cm). Pressure rises in the limiter throat of approximatel 40% are observed under optimized conditions. Interchangable limiter heads with thicknesses of 1.0 cm and 0.3 cm have been used to examine particle ducting into the scoop aperture. Experimental results are discussed along with observations of the limiter floating potential, H α recycling emissions, pressure measurements, and edge density and temperature measurements.

Divertor efficiency in ASDEX

Abstract The divertor efficiency in ASDEX is discussed for ohmically heated plasmas. The parameters of the boundary layer both in the torus midplane and the divertor chamber have been measured. The results are reasonably well understood in terms of parallel and perpendicular transport. A high pressure of neutral hydrogen builds up in the divertor chamber and Franck-Condon particles recycle back through the divertor throat. Due to dissociation processes the boundary plasma is effectively cooled before it reaches the neutralizer plates. The shielding property of the boundary layer against impurity influx is comparable to that of a limiter plasma. The transport of iron is numerically simulated for an iron influx produced by sputtering of charge exchange neutrals at the wall. The results are consistent with the measured iron concentration. First results from a comparison of the poloidal divertor with toroidally closed limiters (stainless steel, carbon) are given. Diverted discharges are considerably cleaner and easier to create.

Low energy neutral particle fluxes to the walls of ASDEX during He and D2 discharges

Neutral particle fluxes onto the walls of ASDEX have been investigated using a time-of-flight (TOF) method. The energy distributions of the neutrals could be determined in the range of 10–1000 eV/amu. Ohmic divertor and limiter discharges with equal plasma currents and densities have been compared for He and D2. The He0 outflux at ∼2000 eV from He discharges is 110 of the corresponding D0 flux in D2 discharges. At lower energies this difference is much smaller. In all cases many more He neutrals were observed than was anticipated from the CX rate-coefficients for He2+. The impurity fluxes due to sputtering by the CX-neutrals show no significant difference for He and D2 discharges. For divertor discharges CX-sputtering can fully account for the Fe impurity content determined spectroscopically.

The Pulsator tokamak

Pulsator was operated by IPP Garching from 1973 to 1979. It made two important contributions to international tokamak research. 1. In Pulsator, for the first time a tokamak plasma was influenced locally by an external, resonant, helical field. The accompanying formation of islands on magnetic surfaces, which affects transport and stability, provided the starting point for experimental investigation of the disruptive instability and its theoretical description. 2. By gas puffing during the discharge it was possible to attain a high-density regime which dramatically raised the then prevailing nτE values by almost two orders of magnitude. In this high-density regime an inward directed particle drift velocity and, as a consequence, under certain conditions an accumulation of impurities in the plasma core was found.

Resonant helical divertor experiments in ohmic and auxiliary heated JIPP T-IIU plasmas

Abstract A series of initial resonant helical divertor (RHD) experiments have been carried out in ohmically and auxiliary heated JIPP T-IIU plasmas. Disruptive and MHD instabilities make the interpretation of the RHD results difficult but an apparent increase in the energy confinement time is observed when the helical magnetic perturbation is applied. This may be due to the suppression of MHD activity or to a reduction in the edge convective heat losses. Magnetic island effects have been observed on the floating potential of a Langmuir probe array and energy scrape-off layer widths have been measured with and without helical perturbations during ICRF operation. Basic pump limiter data is presented including ion temperatures and C4+ impurity profiles. Energy confinement times are reported in ohmically and NBI heated discharges.

Lower hybrid experiments in the ASDEX tokamak

Interaction of lower hybrid waves at 1.3 GHz with ions and electrons was studied in the density range 0.2-5*1013 cm-3 in the ASDEX tokamak. At high densities, ne>or approximately=4*1013 cm-3, fast ions with mainly perpendicular velocities are produced by the RF power at the plasma periphery. They are not well confined and do not lead to any bulk plasma heating. At lower densities, 2*1013<or approximately=ne<or approximately=4*1013 cm-3, electron and ion heating is observed. The heating is better in deuterium than in hydrogen plasmas. At very low densities, ne<or approximately=2*1013 cm-3, the discharge becomes suprathermal as soon as the RF power is switched on. Launching an asymmetric spectrum of waves in a low density plasma leads to the generation of an RF-driven DC-plasma current.

Semi-empirical models of H-mode discharges

The H-mode transition can lead to a rapid increase in tokamak plasma confinement. A semiempirical transport model was derived from global OH and L-mode confinement scalings and then applied to simulation of H-mode discharges. The radial diffusivities in the model depend on local density and pressure gradients and satisfy an appropriate dimensional constraint. Examples are shown of the application of this model and of similar models to the detailed simulation of two discharges which exhibit an H-mode transition. The models reproduce essential features of plasma confinement in the Ohmic heating and the low- and highconfinement phases of these discharges. In particular, the evolution of plasma energy content through the H-mode transition can be reproduced without any sudden or ad hoc modification of the plasma transport formulation.

Confinement regime transitions in ASDEX

The authors give an overview of the different confinement regimes observed on ASDEX and compare the changes during the transition phases with qualitative tendencies suggested by theoretical models. The transitions discussed are those between purely Ohmic heating and additional heating in the L-regime between the L- and the H-regime and between discharges with flat and peaked electron density profiles.

Impurity Accumulation in Plasma Regimes with High Energy Confinement

Investigations of impurity accumulation phenomena in ASDEX are reviewed. There are four different operating regimes where pronounced accumulation is observed and these regimes are also characterized by improved energy confinement. In particular, medium-Z metallic ions are involved in accumulation processes whereas low-Z ions appear almost unaffected. The rapid accumulation observed in the case of metallic ions may be explained by neoclassical inward drifts if we assume that the anomalous diffusion is sufficiently suppressed, some indication of this being found from laser blow-off studies. The present results, however, can only be partly explained by neoclassical theory, according to which accumulation of low-Z impurities should also occur. The temporal behaviour of accumulation and the retarding effect of proton dilution for collision dominated transport are also discussed. Finally, we conclude that the full benefits of improved energy confinement can be achieved only if the impurity influxes are kept to a sufficiently low level. Expressed in terms of concentrations under low confinement conditions we have to postulate, for ASDEX, concentrations ≲ 10−4 for metals and ≲ 2% for all light impurities.

Long-Pulse Heating of ASDEX Plasmas

The Divertor Tokamak ASDEX, its neutral injection system and its ICRH system have been modified to permit additional heating with a power of 6 MW for pulse lengths up to 10 s. The paper summarizes the arguments for long-pulse heating, describes the technical modifications of the divertor performed, their effect on the operational behaviour of the tokamak and presents a few typical results of recent experiments exploiting the long-pulse heating facilities.