Fernanda F. Camilo

Ether-Bond-Containing Ionic Liquids and the Relevance of the Ether Bond Position to Transport Properties

The ionic liquids (ILs) 1-ethoxyethyl-2,3-dimethylimidazolium bis(trifluoromethanesulfonyl)imide, [EtO(CH(2))(2)MMI][Tf(2)N], and N-(ethoxyethyl)-N-methylmorpholinium bis(trifluoromethanesulfonyl)imide, [EtO(CH(2))(2)MMor][Tf(2)N] were synthesized, and relevant properties, such as thermal stability, density, viscosity, electrochemical behavior, ionic conductivity, and self-diffusion coefficients for both ionic species, were measured and compared with those of their alkyl counterparts, 1-n-butyl-2,3-dimethylimidazolium bis(trifluoromethanesulfonyl)imide, [BMMI][Tf(2)N], and N-n-butyl-N-methylpiperidinium bis(trifluoromethanesulfonyl)imide, [BMP][Tf(2)N] and N-n-butyl-N-methylmorpholinium bis(trifluoromethanesulfonyl)imide [BMMor][Tf(2)N]. This comparison was done to evaluate the effects caused by the presence of the ether bond in either the side chain or in the organic cation ring. The salt, LiTf(2)N, was added to the systems to estimate IL behavior with regard to lithium cation transport. Pure [EtO(CH(2))(2)MMI][Tf(2)N] and their LiTf(2)N solutions showed low viscosity and the highest conductivity among the ILs studied. The H(R) (AC conductivity/NMR calculated conductivity ratio) values showed that, after addition of LiTf(2)N, ILs containing the ether bond seemed to have a greater number of charged species. Structural reasons could explain these high observed H(R) values for [EtO(CH(2))(2)MMor][Tf(2)N].

One-pot synthesis of a polyaniline–silver nanocomposite prepared in ionic liquid

A mixture of aniline and a silver salt in ionic liquid has afforded a composite of PANI, in its more conducting form, and silver nanoparticles through a single-step direct reaction, without addition of any acid species or template. An ionic liquid acted as the solvent and template for the nanostructured material. The silver salt (AgTf2N) used in this work is soluble in the chosen ionic liquid, which is not an usual characteristic. TEM analysis of the obtained composite showed the presence of rounded silver nanoparticles with average diameter size around 10–20 nm uniformly dispersed in the polymeric matrix. XRD corroborates the size of the metallic particles at the nanoscale. FTIR and UV-vis confirmed that PANI was obtained in emeraldine salt form. The composite is slightly soluble in DMSO, an unusual feature for bulk conducting polyaniline. The composite shows electrical conductivity 100 times higher than bulk PANI prepared by usual procedures and its electroactivity was studied by cyclic voltammetry. Therefore, in this study it was shown that Ag+, in ionic liquid, is able to quickly oxidize the aniline to PANI, which is not observed in another media.

Physicochemical Properties of Three Ionic Liquids Containing a Tetracyanoborate Anion and Their Lithium Salt Mixtures

Given their relevant physicochemical properties, ionic liquids (ILs) are attracting great attention as electrolytes for use in different electrochemical devices, such as capacitors, sensors, and lithium ion batteries. In addition to the advantages of using ILs containing lithium cations as electrolytes in lithium ion batteries, the Li(+) transport in ILs containing the most common anion, bis(trifluoromethanesulfonyl) imide anion ([Tf2N]), is reportedly small; therefore, its contribution to the overall conductivity is also low. In this work, we describe the preparation and characterization of two new and one known IL containing the tetracyanoborate anion ([B(CN)4]) as the anionic species. These ILs have high thermal and chemical stabilities, with almost twice the ionic conductivity of the [Tf2N] ILs and, most importantly, provide a greater role for the Li(+) ion throughout the conductivity process. The experimental ionic conductivity and self-diffusion coefficient data show that the [B(CN)4]-based ILs and their Li(+) mixtures have a higher number of charge carriers. Molecular dynamics simulations showed a weaker interaction between Li(+) and [B(CN)4] than that with [Tf2N]. These results may stimulate new applications for ILs that have good Li(+) transport properties.

Effect of SO2 on the Transport Properties of an Imidazolium Ionic Liquid and Its Lithium Solution

Transport coefficients have been measured as a function of the concentration of sulfur dioxide, SO(2), dissolved in 1-butyl-2,3-dimethylimidazolium bis(trifluoromethylsulfonyl)imide, [BMMI][Tf(2)N], as well as in its lithium salt solution, Li[Tf(2)N]. The SO(2) reduces viscosity and density and increases conductivity and diffusion coefficients in both the neat [BMMI][Tf(2)N] and the [BMMI][Tf(2)N]-Li[Tf(2)N] solution. The conductivity enhancement is not assigned to a simple viscosity effect; the weakening of ionic interactions upon SO(2) addition also plays a role. Microscopic details of the SO(2) effect were unraveled using Raman spectroscopy and molecular dynamics (MD) simulations. The Raman spectra suggest that the Li(+)-[Tf(2)N] interaction is barely affected by SO(2), and the SO(2)-[Tf(2)N] interaction is weaker than previously observed in an investigation of an ionic liquid containing the bromide anion. Transport coefficients calculated by MD simulations show the same trend as the experimental data with respect to SO(2) content. The MD simulations provide structural information on SO(2) molecules around [Tf(2)N], in particular the interaction of the sulfur atom of SO(2) with oxygen and fluorine atoms of the anion. The SO(2)-[BMMI] interaction is also important because the [BMMI] cations with above-average mobility have a larger number of nearest-neighbor SO(2) molecules.

Probing the local environment of hybrid materials designed from ionic liquids and synthetic clay by Raman spectroscopy.

Hybrid organic-inorganic material containing Laponite clay and ionic liquids forming cations have been prepared and characterized by FT-Raman spectroscopy, X-ray diffraction, and thermal analysis. The effect of varying the length of the alkyl side chain and conformations of cations has been investigated by using different ionic liquids based on piperidinium and imidazolium cations. The structure of the N,N-butyl-methyl-piperidinium cation and the assignment of its vibrational spectrum have been further elucidated by quantum chemistry calculations. The X-ray data indicate that the organic cations are intercalated parallel to the layers of the clay. Comparison of Raman spectra of pure ionic liquids with different anions and the resulting solid hybrid materials in which the organic cations have been intercalated into the clay characterizes the local environment experienced by the cations in the hybrid materials. The Raman spectra of hybrid materials suggest that the local environment of all confined cations, in spite of this diversity in properties, resembles the liquid state of ionic liquids with a relatively disordered structure.

Cellulase and alcohol dehydrogenase immobilized in Langmuir and Langmuir-Blodgett films and their molecular-level effects upon contact with cellulose and ethanol.

The key challenges for producing devices based on nanostructured films with control over the molecular architecture are to preserve the catalytic activity of the immobilized biomolecules and to provide a reliable method for determining the intermolecular interactions and the accommodation of molecules at very small scales. In this work, the enzymes cellulase and alcohol dehydrogenase (ADH) were coimmobilized with dipalmitoylphosphatidylcholine (DPPC) as Langmuir-Blodgett (LB) films, and their biological activities were assayed by accommodating the structure formed in contact with cellulose. For this purpose, the polysaccharide was dissolved in an ionic liquid, 1-buthyl-3-methylimidazolium chloride (BMImCl), and dropped on the top of the hybrid cellulase-ADH-DPPC LB film. The interactions between cellulose and ethanol, which are the catalytic substrates of the enzymes as well as important elements in the production of second-generation fuels, were then investigated using polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS). Investigation of the secondary structures of the enzymes was performed using PM-IRRAS, through which the presence of ethanol and cellulose was observed to highly affect the structures of ADH and cellulase, respectively. The detection of products formed from the catalyzed reactions as well as the changes of secondary structure of the enzymes immobilization could be carried out, which opens the possibility to produce a means for producing second-generation ethanol using nanoscale arrangements.

A one-pot synthesis of a ternary nanocomposite based on mesoporous silica, polyaniline and silver

The research on hybrid materials composed of inorganic and organic species in the nanometer range is motivated by the synergic combination of their native properties in a unique material. In this paper, we report a new one-pot synthesis of a ternary nanocomposite based on a conducting polymer (polyaniline – PANI) and silver, using mesoporous silica (MCM-41) as a hard template to promote the controlled growth of both polymer chains and silver nanoparticles. The presence of these reaction products was proved by the appearance of the characteristic diffraction peaks of face-centered cubic metallic silver phase in the X-ray diffractogram and by the presence of typical bands of polyaniline as emeraldine salt in the FTIR and UV-Vis spectra. The preservation of the ordered MCM-41 mesostructure after the polymerization reaction was also attested by XRD and TEM analysis and it was accompanied by a decreasing of the particle size as observed in the SEM images. N2 adsorption–desorption isotherms support the statement that PANI chains and AgNP have been incorporated mainly into the channel of MCM-41, a fact also attested by TEM images. The electrical conductivity of this nanocomposite is on the order of 10−3 S cm−1, which is one million times higher than the value obtained for a MCM-41/polyaniline composite. Although some reports about the isolated incorporation of polyaniline or silver nanoparticles into the MCM-41 pores are found in the literature, to our knowledge this is the first time that such nanocomposite preparation is reported.

Interaction of non-aqueous dispersions of silver nanoparticles with cellular membrane models

In this work, silver nanoparticles (AgNPs) dispersed in non-aqueous media and stabilized with polyether block polymers amide (PEBA) were incorporated in Langmuir monolayers of dipalmitoylphosphatidylcholine (DPPC), which served as a cell membrane model. The AgNPs presented surface activity, disturbing the viscoelastic properties of the floating film. They expanded the monolayers decreasing their surface elasticity as observed with surface pressure-area isotherms. Polarization modulation reflection-absorption spectroscopy showed that the permanence of AgNPs at the air-water interface is favored by PEBA, affecting both the hydrophilic and the hydrophobic groups of the phospholipid. Brewster angle microscopy showed that the AgNPs lead to the formation of aggregates at the air-water interface, establishing domains that shear with each other due to the low lateral viscosity of irregular and non-monomolecular domains. These data can be correlated to the possible toxicity and microbicide effect of AgNPs in lipidic surfaces such as in mammalian and microbial membranes.

Ozonated Mineral Oil: Preparation, Characterization and Evaluation of the Microbicidal Activity

ABSTRACT The ozonation of vegetable oils has been studied, since the produced ointments have antibacterial and fungicidal activities. However, the ozonation of mineral oils has not been reported in the literature yet, opening an interesting field for examination. In this work, we have shown the ozonation of a commercial mineral oil (Nujol). The main goal was to produce oils containing free ozone, so that this gas could act as antimicrobial agent. It was found that in Nujol, ozone remains for at least 40 days and in the sample ozonized for 15 h its concentration was 7.5 mg mL−1. Neat Nujol showed no antimicrobial activity against the tested microorganisms, however, when ozonated it showed antimicrobial activity against Enterococcus faecalis, Staphylococcus aureus and Escherichia coli.

Application of an Ionic Liquid in the Microwave Assisted Extraction of Cytotoxic Metabolites from Fruits of Schinus terebinthifolius Raddi (Anacardiaceae)

This work reports the application of an ionic liquid (1-butyl-3-methylimidazolium bromide, BMImBr) in the microwave assisted extraction (MAE) of metabolites from fruits of Schinus terebinthifolius. Dried fruits were individually extracted using BMImBr:H2O 1:1, v/v (experiment 1) and pure H2O (experiment 2) by MAE (10 min at 60 °C). After partition using EtOAc, the yield to experiment 1 was about 23% while to experiment 2 was 0.1%. The EtOAc fraction obtained from experiment 1 was purified by chromatographic methods to afford 3-oxotirucalla-7,24 Z-dien27-oic acid, 3a-hydroxytirucalla-7,24Z-dien-27-oic acid, 3a-acetoxytirucalla-7,24Z-dien-27-oic acid, gallic acid, and ethyl gallate, being the first occurrence of the third compound as natural product. Cytotoxic activity was evaluated in vitro against cancer cell lines (A2058, HeLa, SiHa, HCT, SKBR-3, U87, and B16F2Nex2), being 3a-acetoxytirucalla-7,24Z-dien-27-oic acid the more active metabolite with IC50 ranging from 10.9 ± 1.3 to 17.3 ± 1.4 µg mL -1 , lower than that determined to positive control cisplatin.