Florian Monlau

Lignocellulosic materials into biohydrogen and biomethane: impact of structural features and pretreatment.

Production of energy from lignocellulosic biomass or residues is receiving ever-increasing interest. Among the different processes, dark fermentation for producing biohydrogen and anaerobic digestion for producing biomethane present considerable advantages. However, they are limited by the accessibility of holocelluloses that are embedded in the lignin network. The authors propose a review of works on the conversion of biomass into biohydrogen and biomethane with the comprehensive description of (a) biomass composition and features that may impact on its anaerobic conversion and (b) the impact of different kinds of pretreatment on these features and on the performance of biohydrogen and methane production.

Do furanic and phenolic compounds of lignocellulosic and algae biomass hydrolyzate inhibit anaerobic mixed cultures? A comprehensive review

Nowadays there is a growing interest on the use of both lignocellulosic and algae biomass to produce biofuels (i.e. biohydrogen, ethanol and methane), as future alternatives to fossil fuels. In this purpose, thermal and thermo-chemical pretreatments have been widely investigated to overcome the natural physico-chemical barriers of such biomass and to enhance biofuel production from lignocellulosic residues and, more recently, marine biomass (i.e. macro and microalgae). However, the pretreatment technologies lead not only to the conversion of carbohydrate polymers (ie cellulose, hemicelluloses, starch, agar) to soluble monomeric sugar (ie glucose, xylose, arabinose, galactose), but also the generation of various by-products (i.e. furfural and 5-HMF). In the case of lignocellulosic residues, part of the lignin can also be degraded in lignin derived by-products, mainly composed of phenolic compounds. Although the negative impact of such by-products on ethanol production has been widely described in literature, studies on their impact on biohydrogen and methane production operated with mixed cultures are still very limited. This review aims to summarise and discuss literature data on the impact of pre-treatment by-products on H2-producing dark fermentation and anaerobic digestion processes when using mixed cultures as inoculum. As a summary, furanic (5-HMF, furfural) and phenolic compounds were found to be stronger inhibitors of the microbial dark fermentation than the full anaerobic digestion process. Such observations can be explained by differences in process parameters: anaerobic digestion is performed with more complex mixed cultures, lower substrate/inoculum and by-products/inoculum ratios and longer batch incubation times than dark fermentation. Finally, it has been reported that, during dark fermentation process, the presence of by-products could lead to a metabolic shift from H2-producing pathways (i.e. acetate and butyrate) to non-H2-producing pathways (i.e. lactate, ethanol and propionate) and whatever the metabolic route, metabolites can be all further converted into methane, but at different rates.

Effect of lignin-derived and furan compounds found in lignocellulosic hydrolysates on biomethane production

Hydrolysates resulting from the lignocellulosic biomass pretreatment in bioethanol production may be used to produce biogas. Such hydrolysates are rich in xylose but also contain lignin polymers or oligomers as well as phenolic and furan compounds, such as syringaldehyde, vanillin, HMF, furfural. The aim of this study was to investigate the impact of these byproducts on biomethane production from xylose. The anaerobic digestion of the byproducts alone was also investigated. No inhibition of the anaerobic digestion of xylose was observed and methane was obtained from furans: 430 mL CH(4)/g of furfural and 450 mL CH(4)/g of HMF; from phenolic compounds: 453 mL CH(4)/g of syringaldehyde and 105 mL CH(4)/g of vanillin; and, to a lesser extent, from lignin polymers: from 14 to 46 mL CH(4)/g MV. The use of different natural polymers (lignosulfonates, organosolv and kraft lignins) and synthetic dehydrogenative polymers showed that higher S/G ratios and lower molecular weights in lignin polymers led to greater methane production.

Comparison of seven types of thermo-chemical pretreatments on the structural features and anaerobic digestion of sunflower stalks.

Sunflower stalks can be used for the production of methane, but their recalcitrant structure requires the use of thermo-chemical pretreatments. Two thermal (55 and 170°C) and five thermo-chemical pretreatments (NaOH, H(2)O(2), Ca(OH)(2), HCl and FeCl(3)) were carried out, followed by anaerobic digestion. The highest methane production (259 ± 6 mL CH(4)g(-1) VS) was achieved after pretreatment at 55°C with 4% NaOH for 24h. Acidic pretreatments at 170°C removed more than 90% of hemicelluloses and uronic acids whereas alkaline and oxidative pretreatments were more effective in dissolving lignin. However, no pretreatment was effective in reducing the crystallinity of cellulose. Methane production rate was positively correlated with the amount of solubilized matter whereas methane potential was negatively correlated with the amount of lignin. Considering that the major challenge is obtaining increased methane potential, alkaline pretreatments can be recommended in order to optimize the anaerobic digestion of lignocellulosic substrates.

Predictive models of biohydrogen and biomethane production based on the compositional and structural features of lignocellulosic materials.

In an integrated biorefinery concept, biological hydrogen and methane production from lignocellulosic substrates appears to be one of the most promising alternatives to produce energy from renewable sources. However, lignocellulosic substrates present compositional and structural features that can limit their conversion into biohydrogen and methane. In this study, biohydrogen and methane potentials of 20 lignocellulosic residues were evaluated. Compositional (lignin, cellulose, hemicelluloses, total uronic acids, proteins, and soluble sugars) as well as structural features (crystallinity) were determined for each substrate. Two predictive partial least square (PLS) models were built to determine which compositional and structural parameters affected biohydrogen or methane production from lignocellulosic substrates, among proteins, total uronic acids, soluble sugars, crystalline cellulose, amorphous holocelluloses, and lignin. Only soluble sugars had a significant positive effect on biohydrogen production. Besides, methane potentials correlated negatively to the lignin contents and, to a lower extent, crystalline cellulose showed also a negative impact, whereas soluble sugars, proteins, and amorphous hemicelluloses showed a positive impact. These findings will help to develop further pretreatment strategies for enhancing both biohydrogen and methane production.

New opportunities for agricultural digestate valorization: current situation and perspectives

In the agricultural sector of many European countries, biogas production through anaerobic digestion (AD) is becoming a very fast-growing market. AD is a simple and robust process that biologically converts an organic matrix into biogas and digestate, the latter corresponding to the anaerobically non-degraded fraction. So far, digestate has been mostly used at farm-scales for improving soils. However, its ever-increasing production induces problems related to transport costs, greenhouse-gas emissions during storage and high nitrogen content that constrains its use to land application only. Consequently, research on alternative valorisation routes to reduce its environmental impact and to improve the economical profitability of AD plants should draw increasing interest in the future. This review therefore focuses on the different alternatives of digestate valorisation, apart from land applications: (I) the use of the digestate liquor for replacing freshwater and nutrients in algae cultivation; (II) the use of solid digestate for energy production through biological (i.e. AD, bioethanol) or thermal processes (i.e. combustion, hydrothermal carbonization and pyrolysis); (III) the conversion of solid digestate into added-value products (char or activated carbons) through a pyrolysis process.

Two-stage alkaline-enzymatic pretreatments to enhance biohydrogen production from sunflower stalks.

Because of their rich composition in carbohydrates, lignocellulosic residues represent an interesting source of biomass to produce biohydrogen by dark fermentation. Nevertheless, pretreatments should be applied to enhance the solubilization of holocelluloses and increase their further conversion into biohydrogen. The aim of this study was to investigate the effect of thermo-alkaline pretreatment alone and combined with enzymatic hydrolysis to enhance biohydrogen production from sunflower stalks. A low increase of hydrogen potentials from 2.3 ± 0.9 to 4.4 ± 2.6 and 20.6 ± 5.6 mL of H2 g(-1) of volatile solids (VS) was observed with raw sunflower stalks and after thermo-alkaline pretreatment at 55 °C, 24 h, and 4% NaOH and 170 °C, 1 h, and 4% NaOH, respectively. Enzymatic pretreatment alone showed an enhancement of the biohydrogen yields to 30.4 mL of H2 g(-1) of initial VS, whereas it led to 49 and 59.5 mL of H2 g(-1) of initial VS when combined with alkaline pretreatment at 55 and 170 °C, respectively. Interestingly, a diauxic effect was observed with sequential consumption of sugars by the mixed cultures during dark fermentation. Glucose was first consumed, and once glucose was completely exhausted, xylose was used by the microorganisms, mainly related to Clostridium species.

Pyrochars from bioenergy residue as novel bio-adsorbents for lignocellulosic hydrolysate detoxification

The robust supramolecular structure of biomass often requires severe pretreatments conditions to produce soluble sugars. Nonetheless, these processes generate some inhibitory compounds (i.e. furans compounds and aliphatic acids) deriving mainly from sugars degradation. To avoid the inhibition of the biological process and to obtain satisfactory sugars conversion level into biofuels, a detoxification step is required. This study investigates the use of two pyrochars derived from solid anaerobic digestates for the detoxification of lignocellulosic hydrolysates. At a pyrochar concentration of 40gL(-1), more than 94% of 5-HMF and 99% of furfural were removed in the synthetic medium after 24h of contact time, whereas sugars concentration remained unchanged. Furfural was adsorbed faster than 5-HMF by both pyrochars and totally removed after 3h of contact. Finally, the two pyrochars were found efficient in the detoxification of corn stalks and Douglas fir wood chips hydrolysates without affecting the soluble sugars concentrations.

Application of optimized alkaline pretreatment for enhancing the anaerobic digestion of different sunflower stalks varieties

The use of lignocellulosic residues such as sunflower stalks (SS) for the production of bioenergy such as methane is a promising alternative to fossil fuels. However, their recalcitrant structure justifies the use of pretreatment to enhance the accessibility of holocelluloses and their further conversion into methane. First, different conditions of alkaline pretreatment (i.e. duration and NaOH concentration (g/100 g TS) at a fixed temperature of 55°C) were tested to enhance the methane potential of the stalks of the Serin sunflower (193 mL of methane per gram of volatile solids (VS)). The greatest improvement to the methane potential (262 mL CH4 g−1 VS) was observed at 55°C, 24 h, 4 g NaOH/100 g TS. Fourier Transform Infrared spectra highlighted an accumulation of lignin in the digestate and the degradation of holocelluloses during the anaerobic process, both for pretreated and untreated SS. In a second stage, this optimum condition for alkaline pretreatment (55°C, 24 h, 4 g NaOH/100 g TS) was applied to the stalks of three other varieties of sunflower. Alkaline pretreatment was effective in the delignification of the stalks of the different sunflower varieties, with lignin reduction varying from 23.3% to 36.3% VS. This reduction of lignin was concomitant with the enhancement of methane potential as compared to that of raw SS, with an increase ranging from 29% to 44% for the different SS.

Mechano-Enzymatic Deconstruction with a New Enzymatic Cocktail to Enhance Enzymatic Hydrolysis and Bioethanol Fermentation of Two Macroalgae Species

The aim of this study was to explore the efficiency of a mechano-enzymatic deconstruction of two macroalgae species for sugars and bioethanol production, by using a new enzymatic cocktail (Haliatase) and two types of milling modes (vibro-ball: VBM and centrifugal milling: CM). By increasing the enzymatic concentration from 3.4 to 30 g/L, the total sugars released after 72 h of hydrolysis increased (from 6.7 to 13.1 g/100 g TS and from 7.95 to 10.8 g/100 g TS for the green algae U. lactuca and the red algae G. sesquipedale, respectively). Conversely, total sugars released from G. sesquipedale increased (up to 126% and 129% after VBM and CM, respectively). The best bioethanol yield (6 geth/100 g TS) was reached after 72 h of fermentation of U. lactuca and no increase was obtained after centrifugal milling. The latter led to an enhancement of the ethanol yield of G. sesquipedale (from 2 to 4 g/100 g TS).