Francois Menard

Flows of gas through a protoplanetary gap.

The formation of gaseous giant planets is thought to occur in the first few million years after stellar birth. Models predict that the process produces a deep gap in the dust component (shallower in the gas). Infrared observations of the disk around the young star HD 142527 (at a distance of about 140 parsecs from Earth) found an inner disk about 10 astronomical units (au) in radius (1 au is the Earth–Sun distance), surrounded by a particularly large gap and a disrupted outer disk beyond 140 au. This disruption is indicative of a perturbing planetary-mass body at about 90 au. Radio observations indicate that the bulk mass is molecular and lies in the outer disk, whose continuum emission has a horseshoe morphology. The high stellar accretion rate would deplete the inner disk in less than one year, and to sustain the observed accretion matter must therefore flow from the outer disk and cross the gap. In dynamical models, the putative protoplanets channel outer-disk material into gap-crossing bridges that feed stellar accretion through the inner disk. Here we report observations of diffuse CO gas inside the gap, with denser HCO+ gas along gap-crossing filaments. The estimated flow rate of the gas is in the range of 7 × 10−9 to 2 × 10−7 solar masses per year, which is sufficient to maintain accretion onto the star at the present rate.1. Departamento de Astronomı́a, Universidad de Chile, Casilla 36-D, Santiago, Chile 2. Joint ALMA Observatory, Alonso de Córdova 3107, Vitacura 763-0355, Santiago Chile 3. European Southern Observatory (ESO), Casilla 19001, Vitacura, Santiago, Chile 4. National Radio Astronomy Observatory, 520 Edgemont Road, Charlottesville, VA 22903-2475, USA 5. Observatoire de Genève, Université de Genève, 51 ch. des Maillettes, 1290, Versoix, Switzerland 6. Departamento de Astronomı́a y Astrofı́sica, Pontificia Universidad Católica de Chile, Santiago, Chile 7. UMI-FCA, CNRS / INSU France (UMI 3386) , and Departamento de Astronomı́a, Universidad de Chile, Santiago, Chile. 8. CNRS / UJF Grenoble 1, UMR 5274, Institut de Planétologie et dAstrophysique de Grenoble (IPAG), France 9. Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 USA 10. Department of Astronomy, U. C. Berkeley, 601 Campbell Hall, Berkeley, CA 94720 11. Departamento de Fı́sica y Astronomı́a, Universidad Valparaiso, Av. Gran Bretana 111, Valparaiso, Chile. 12. University Observatory, Ludwig-Maximillians University, Munich.

PIONIER: a 4-telescope visitor instrument at VLTI

PIONIER stands for Precision Integrated-Optics Near-infrared Imaging ExpeRiment. It combines four 1.8m Auxilliary Telescopes or four 8m Unit Telescopes of the Very Large Telescope Interferometer (ESO, Chile) using an integrated optics combiner. The instrument has been integrated at IPAG starting in December 2009 and commissioned at the Paranal Observatory in October 2010. It provides scientific observations since November 2010. In this paper, we detail the instrumental concept, we describe the standard operational modes and the data reduction strategy. We present the typical performance and discuss how to improve them. This paper is based on laboratory data obtained during the integrations at IPAG, as well as on-sky data gathered during the commissioning at VLTI. We illustrate the imaging capability of PIONIER on the binaries deltaSco and HIP11231. PIONIER provides 6 visibilities and 3 independent closure phases in the H band, either in a broadband mode or with a low spectral dispersion (R=40), using natural light (i.e. unpolarized). The limiting magnitude is Hmag=7 in dispersed mode under median atmospheric conditions (seeing 3ms) with the 1.8m Auxiliary Telescopes. We demonstrate a precision of 0.5deg on the closure phases. The precision on the calibrated visibilities ranges from 3 to 15% depending on the atmospheric conditions. PIONIER has been installed and successfully tested as a visitor instrument for the VLTI. It permits high angular resolution imaging studies at an unprecedented level of sensitivity. The successful combination of the four 8m Unit Telescopes in March 2011 demonstrates that VLTI is ready for 4-telescope operation.

Magnetic fields and accretion flows on the classical T Tauri star V2129 Oph

From observations collected with the ESPaDOnS spectropolarimeter, we report the discovery of magnetic fields at the surface of the mildly accreting classical T Tauri star V2129 Oph. Zeeman signatures are detected, both in photospheric lines and in the emission lines formed at the base of the accretion funnels linking the disc to the protostar, and monitored over the whole rotation cycle of V2129 Oph. We observe that rotational modulation dominates the temporal variations of both unpolarized and circularly polarized line profiles. We reconstruct the large-scale magnetic topology at the surface of V2129 Oph from both sets of Zeeman signatures simultaneously. We find it to be rather complex, with a dominant octupolar component and a weak dipole of strengths 1.2 and 0.35 kG, respectively, both slightly tilted with respect to the rotation axis. The large-scale field is anchored in a pair of 2-kG unipolar radial field spots located at high latitudes and coinciding with cool dark polar spots at photospheric level. This large-scale field geometry is unusually complex compared to those of non-accreting cool active subgiants with moderate rotation rates. As an illustration, we provide a first attempt at modelling the magnetospheric topology and accretion funnels of V2129 Oph using field extrapolation. We find that the magnetosphere of V2129 Oph must extend to about 7R* to ensure that the footpoints of accretion funnels coincide with the high-latitude accretion spots on the stellar surface. It suggests that the stellar magnetic field succeeds in coupling to the accretion disc as far out as the corotation radius, and could possibly explain the slow rotation of V2129 Oph. The magnetospheric geometry we derive produces X-ray coronal fluxes typical of those observed in cTTSs.

Benchmark problems for continuum radiative transfer. High optical depths, anisotropic scattering, and polarisation

Solving the continuum radiative transfer equation in high opacity media requires sophisticated numerical tools. In order to test the reliability of such tools, we present a benchmark of radiative transfer codes in a 2D disc configuration. We test the accuracy of seven independently developed radiative transfer codes by comparing the temperature structures, spectral energy distributions, scattered light images, and linear polarisation maps that each model predicts for a variety of disc opacities and viewing angles. The test cases have been chosen to be numerically challenging, with midplane optical depths up 10^6, a sharp density transition at the inner edge and complex scattering matrices. We also review recent progress in the implementation of the Monte Carlo method that allow an efficient solution to these kinds of problems and discuss the advantages and limitations of Monte Carlo codes compared to those of discrete ordinate codes. For each of the test cases, the predicted results from the radiative transfer codes are within good agreement. The results indicate that these codes can be confidently used to interpret present and future observations of protoplanetary discs.

Unveiling the gas-and-dust disk structure in HD 163296 using ALMA observations

Aims. The aim of this work is to study the structure of the protoplan etary disk surrounding the Herbig Ae star HD 163296. Methods. We have used high-resolution and high-sensitivity ALMA observations of the CO(3‐2) emission line and the continuum at 850µm, as well as the 3- dimensional radiative transfer code MCFOST to model the data presented in this work. Results. The CO(3‐2) emission unveils for the first time at sub-millim eter frequencies the vertical structure details of a gaseou s disk in Keplerian rotation, showing the back- and the front-side of a flared disk. Continuum emission at 850 µm reveals a compact dust disk with a 240 AU outer radius and a surface brightness profil e that shows a very steep decline at radius larger than 125 AU. The gaseous disk is more than two times larger than the dust disk, with a similar critical radius but with a shallower radial pr ofile. Radiative transfer models of the continuum data confirms the need for a s harp outer edge to the dust disk. The models for the CO(3‐2) channel map require the disk to be slightly more geometrically thick than previous models suggested, and that the temperature at which CO gas becomes depleted (frozen-out) from the outer regions of the disk midplane is T < 20 K, in agreement with previous studies.

Probing dust grain evolution in IM Lupi's circumstellar disc Multi-wavelength observations and modelling of the dust disc

Aims. We present a panchromatic study, involving a multiple technique approach, of the circumstellar disc surrounding the T Tauri star IM Lupi (Sz 82). Methods. We have undertaken a comprehensive observational study of IM Lupi using photometry, spectroscopy, millimetre interferometry and multi-wavelength imaging. For the first time, the disc is resolved from optical and near-infrared wavelengths in scattered light, to the millimetre regime in thermal emission. Our data-set, in conjunction with existing photometric data, provides an extensive coverage of the spectral energy distribution, including a detailed spectrum of the silicate emission bands. We have performed a simultaneous modelling of the various observations, using the radiative transfer code MCFOST, and analysed a grid of models over a large fraction of the parameter space via Bayesian inference. Results. We have constructed a model that can reproduce all of the observations of the disc. Our analysis illustrates the importance of combining a wide range of observations in order to fully constrain the disc model, with each observation providing a strong constraint only on some aspects of the disc structure and dust content. Quantitative evidence of dust evolution in the disc is obtained: grain growth up to millimetre-sized particles, vertical stratification of dust grains with micrometric grains close to the disc surface and larger grains which have settled towards the disc midplane, and possibly the formation of fluffy aggregates and/or ice mantles around grains.

Discovery of an 86 AU Radius Debris Ring around HD 181327

HST NICMOS PSF-subtractedcoronagraphicobservationsof HD181327haverevealedthepresenceofaringlike disk of circumstellar debris seen in 1.1 � m light scattered by the disk grains, surrounded by a diffuse outer region of lower surface brightness. The annular disk appears to be inclined by 31N7 � 1N6 from face-on, with the disk major-axis P.A. at 107 � � 2 � . The total 1.1 � m flux density of the light scattered by the disk (at 1B2 < r < 5B0) of 9:6 � 0:8 mJy is 0:17% � 0:015% of the starlight. Seventy percent of the light from the scattering grains appears to be confined in a 36AUwideannuluscenteredonthepeakoftheradialsurfacebrightness(SB)profile86:3 � 3:9AUfromthestar,well beyond the characteristic radius of thermal emission estimated from IRAS and Spitzer flux densities, assuming blackbody grains (� 22 AU). The 1.1 � m light scattered by the ring (1) appears bilaterally symmetric, (2) exhibits directionallypreferentialscatteringwellrepresentedbyaHenyey-Greensteinscatteringphasefunctionwith g HG ¼ 0:30 � 0:03, and (3) has a median SB (over all azimuth angles) at the 86.3 AU radius of peak SB of 1:00 � 0:07 mJy arcsec � 2 .N o photocentric offset is seen in the ring relative to the position of the central star. A low SB diffuse halo is seen in the NICMOS image to a distance of � 4 00 . Deeper 0.6 � m Hubble Space Telescope (HST) ACS PSF-subtracted coronagraphic observationsreveala faint (V � 21:5 mag arcsec � 2 ) outer nebulosityat4 00 < r < 9 00 , asymmetrically brighter to the north of the star. We discuss models of the disk and properties of its grains, from which we infer a maximum vertical scale height of 4Y8 AU at the 87.6 AU radius of maximum surface density, and a total maximum dust mass of collisionally replenished grains with minimum grain sizes of � 1 � mo f� 4MMoon. Subject headingg circumstellar matter — infrared: stars — planetary systems: protoplanetary disks — stars: individual (HD 181327)

Asymmetric features in the protoplanetary disk MWC 758

Context. The study of dynamical processes in protoplanetary disks is essential to understand planet formation. In this context, transition disks are prime targets because they are at an advanced stage of disk clearing and may harbor direct signatures of disk evolution. Aims. We aim to derive new constraints on the structure of the transition disk MWC 758, to detect non-axisymmetric features and understand their origin. Methods. We obtained infrared polarized intensity observations of the protoplanetary disk MWC 758 with SPHERE/VLT at 1.04 m to resolve scattered light at a smaller inner working angle (0.093 00 ) and a higher angular resolution (0.027 00 ) than previously achieved. Results. We observe polarized scattered light within 0.53 00 (148 au) down to the inner working angle (26 au) and detect distinct nonaxisymmetric features but no fully depleted cavity. The two small-scale spiral features that were previously detected with HiCIAO are resolved more clearly, and new features are identified, including two that are located at previously inaccessible radii close to the star. We present a model based on the spiral density wave theory with two planetary companions in circular orbits. The best model requires a high disk aspect ratio (H=r 0.20 at the planet locations) to account for the large pitch angles which implies a very warm disk. Conclusions. Our observations reveal the complex morphology of the disk MWC 758. To understand the origin of the detected features, the combination of high-resolution observations in the submillimeter with ALMA and detailed modeling is needed.

WFPC2 Images of a Face-on Disk Surrounding TW Hydrae

Hubble Space Telescope observations of the isolated T Tauri star TW Hydrae reveal the presence of a compact circumstellar nebula. After subtraction of a reference point-spread function (PSF), a smooth, symmetrical, circular halo can be seen in both R- and I-band WFPC2 images. Its intensity declines with radius until reaching an outer sensitivity limit at 35 (≈200 AU). Numerical experiments show that PSF subtraction artifacts cannot account for the halos brightness distribution. Instead, the most likely explanation is that the halo is a face-on circumstellar disk. The radial brightness profile of the halo is complex and can be described with multiple, contiguous zones with individual power-law intensity relations. The halo appears slightly blue relative to the star, especially in the outer zones. We compare the TW Hya halo to single-scattering models of face-on disks with multiple radial zones. While optically thin disk models with vertical optical depth τv ≈ 10-2 can reproduce the relative brightness of the nebula and star, we find that such models have large midplane optical depths and are therefore not self-consistent. We present an optically thick disk model that matches the radial brightness profile self-consistently and has a dust mass close to that implied by submillimeter continuum measurements. The zonal structure found in the disk could arise from radial variations in the dust properties that determine the local equilibrium temperature or perhaps via dynamical effects of unseen companions.

The complex structure of the disk around HD 100546 - The inner few astronomical units

Disclosing the structure of disks surrounding Herbig AeBe stars is important to expand our understanding of the formation and early evolution of stars and planets. We aim at revealing the sub-AU disk structure around the 10 Myr old Herbig Be star HD100546 and at investigating the origin of its near and mid-infrared excess. We used AMBER/VLTI observations to resolve the K-band emission and to constrain the location and composition of the hot dust in the innermost disk. Combining AMBER observations with photometric and MIDI/VLTI measurements from the litterature, we revisit the disk geometry using a passive disk model based on 3D radiative transfer. We propose a model that includes a tenuous inner disk made of micron-sized dust grains, a gap, and a massive optically thick outer disk, that successfully reproduces the interferometric data and the SED. We locate the bulk of the K-band emission at ~0.26 AU. Assuming that this emission originates from silicate, we show that micron-sized grains are required to enable the dust to survive at such a distance from the star. As a consequence, more than 40% of the K-band flux is related to scattering, showing that direct thermal emission is not sufficient to explain the near-infrared excess. In the massive outer disk, large grains in the mid-plane are responsible for the mm emission while a surface layer of small grains allows the mid and far infrared excesses to be reproduced. Such vertical structure may be an evidence for sedimentation. The observations are consistent with a model that includes a gap until ~13 AU and a total dust mass of ~0.008 lunar mass inside it. These values together with the derived scale height (~2.5 AU) and temperature (~220 K) at the inner edge of the outer disk (r=13 AU), are consistent with recent CO observations.