G. Giannoulis

0.48Tb/s (12x40Gb/s) WDM transmission and high-quality thermo-optic switching in dielectric loaded plasmonics

We demonstrate Wavelength Division Multiplexed (WDM)-enabled transmission of 480Gb/s aggregate data traffic (12x40Gb/s) as well as high-quality 1x2 thermo-optic tuning in Dielectric-Loaded Surface Plasmon Polariton Waveguides (DLSPPWs). The WDM transmission characteristics have been verified through BER measurements by exploiting the heterointegration of a 60 μm-long straight DLSPPW on a Silicon-on-Insulator waveguide platform, showing error-free performance for six out of the twelve channels. High-quality thermo-optic tuning has been achieved by utilizing Cycloaliphatic-Acrylate-Polymer as an efficient thermo-optic polymer loading employed in a dual-resonator DLSPPW switching structure, yielding a 9 nm wavelength shift and extinction ratio values higher than 10 dB at both output ports when heated to 90°C.

Multi-format all-optical processing based on a large-scale, hybridly integrated photonic circuit

We investigate through numerical studies and experiments the performance of a large scale, silica-on-silicon photonic integrated circuit for multi-format regeneration and wavelength-conversion. The circuit encompasses a monolithically integrated array of four SOAs inside two parallel Mach-Zehnder structures, four delay interferometers and a large number of silica waveguides and couplers. Exploiting phase-incoherent techniques, the circuit is capable of processing OOK signals at variable bit rates, DPSK signals at 22 or 44 Gb/s and DQPSK signals at 44 Gbaud. Simulation studies reveal the wavelength-conversion potential of the circuit with enhanced regenerative capabilities for OOK and DPSK modulation formats and acceptable quality degradation for DQPSK format. Regeneration of 22 Gb/s OOK signals with amplified spontaneous emission (ASE) noise and DPSK data signals degraded with amplitude, phase and ASE noise is experimentally validated demonstrating a power penalty improvement up to 1.5 dB.

Agile photonic integrated systems-on-chip enabling WDM terabit networks

The ICT-APACHE research project is focusing on the development of cost-effective, compact, scalable and agile integrated components capable of generating, regenerating and receiving multi-level encoded data signals for high capacity (>100 Gb/s) WDM optical networks. APACHE technology relies on InP active, monolithic chips, hybridly integrated on silica-on-silicon planar lightwave platforms in order to achieve cost-efficiency, high yield, low power consumption and device scaling beyond the level commercially available today. The APACHE integration approach is implemented in a two-dimensional plan, horizontally and vertically, in order to enable multi-functionality and increased capacity, respectively. The final goal of the APACHE project is the fabrication of integrated arrays of transmitters, receivers and regenerators that will operate with 100 Gb/s OOK, DPSK and DQPSK modulated signals, allowing for 1 Terabit/s on-chip capacity. In this paper, we will review the latest results from the system-level characterization of the developed components and will outline the roadmap for future endeavours.

High gain 1.3-μm GaInNAs SOA with fast-gain dynamics and enhanced temperature stability

Semiconductor optical amplifiers (SOAs) are a well-established solution of optical access networks. They could prove an enabling technology for DataCom by offering extended range of active optical functionalities. However, in such costand energy-critical applications, high-integration densities increase the operational temperatures and require powerhungry external cooling. Taking a step further towards improving the cost and energy effectiveness of active optical components, we report on the development of a GaInNAs/GaAs (dilute nitride) SOA operating at 1.3μm that exhibits a gain value of 28 dB and combined with excellent temperature stability owing to the large conduction band offset between GaInNAs quantum well and GaAs barrier. Moreover, the characterization results reveal almost no gain variation around the 1320 nm region for a temperature range from 20° to 50° C. The gain recovery time attained values as short as 100 ps, allowing implementation of various signal processing functionalities at 10 Gb/s. The combined parameters are very attractive for application in photonic integrated circuits requiring uncooled operation and thus minimizing power consumption. Moreover, as a result of the insensitivity to heating issues, a higher number of active elements can be integrated on chip-scale circuitry, allowing for higher integration densities and more complex optical on-chip functions. Such component could prove essential for next generation DataCom networks.

Field-trial demonstration of an extended-reach GPON-supporting 60-GHz indoor wireless access

The 5G era is nearly upon us, and poses several challenges for system designers; one important question is how the (soon to be standardized) mmWave bands of wireless mobile access can coexist harmoniously with optical links in fixed telecom networks. To this end, we present a Radio-over-Fiber (RoF) backhauling concept, interfaced to a 60-GHz indoor femto-cell via a field-installed optical fiber link. We successfully demonstrate generation of a RoF signal up to 1 Gb/s and transmit it optically over 43 km of deployed Single Mode Fiber (SMF), as well as investigate the performance of the 60-GHz access link as a function of distance. The optical link introduces negligible degradation, contrasting the effect of multipath fading in the 60-GHz wireless channel; the latter requires adaptive equalization using offline DSP. The proposed scheme is further validated by demonstration of a 60-GHz Remote Antenna Unit (RAU) concept, handling real traffic from commercial Gigabit Passive Optical Network (GPON) equipment. Proper RAU operation at 1.25 Gb/s is achieved, accommodating true data packets from a Media Converter emitting at 1310 nm through an in-building fiber link. System performance is confirmed through Bit Error Rate (BER) and Error Vector Magnitude (EVM) measurements. EVMs of ~11 and 19% are achieved with BPSK signals, for distances of 1 and 2 m respectively. As standardization of mmWave technologies moves from 5G testbeds to field-trial prototypes, successful demonstration of such 60-GHz wireless access scenarios over a telecom operator’s commercial fiber infrastructure is even more relevant.

Eight-channel second-order ring resonator based SOI multiplexers/demultiplexers for optical interconnects

We demonstrate two 8×1 silicon ring-based multiplexers for dual stream multiplexing. All resonances were thermo-optically tuned and spaced by 100GHz having >40GHz bandwidth. Error-free performance without significant signal degradation was obtained for two 4-channel streams at 10Gb/s.