H. de Waardt

Coherent Equalization and POLMUX-RZ-DQPSK for Robust 100-GE Transmission

We discuss the use of a coherent digital receiver for the compensation of linear transmission impairments and polarization demultiplexing in a transmission system compatible with a future 100-Gb/s Ethernet standard. We present experimental results on the transmission performance of 111 Gbit/s POLMUX-RZ-DQPSK. For a dense WDM setup with channels carrying 111 Gbit/s with a 50 GHz channel spacing (2.0 bits/s/Hz), we show the feasibility of 2375 km transmission. This is enabled through coherent detection which results in excellent noise performance, and subsequent electronic equalization which provides the high tolerance to polarization mode dispersion and chromatic dispersion (CD). Furthermore, we discuss the impact of sampling and digital signal processing with either 1 or 2 samples/bit. We show that when combined with low-pass electrical filtering, 1 sample/bit signal processing is sufficient to obtain a large tolerance towards CD. The proposed modulation and detection techniques enable 111 Gbit/s transmission that is directly compatible with the existing 10 Gbit/s infrastructure.

Optical packet switching and buffering by using all-optical signal processing methods

We present a 1 /spl times/ 2 all-optical packet switch. All the processing of the header information is carried out in the optical domain. The optical headers are recognized by employing the two-pulse correlation principle in a semiconductor laser amplifier in loop optical mirror (SLALOM) configuration. The processed header information is stored in an optical flip-flop memory that is based on a symmetric configuration of two coupled lasers. The optical flip-flop memory drives a wavelength routing switch that is based on cross-gain modulation in a semiconductor optical amplifier. We also present an alternative optical packet routing concept that can be used for all-optical buffering of data packets. In this case, an optical threshold function that is based on a asymmetric configuration of two coupled lasers is used to drive a wavelength routing switch. Experimental results are presented for both the 1 /spl times/ 2 optical packet switch and the optical buffer switch.

Error-Free 320-Gb/s All-Optical Wavelength Conversion Using a Single Semiconductor Optical Amplifier

We demonstrate error-free wavelength conversion at 320 Gb/s by employing a semiconductor optical amplifier that fully recovers in 56 ps. Error-free operation is achieved without using forward error correction technology. We employ optical filtering to select the blue sideband of the spectrum of the probe light, to utilize fast chirp dynamics introduced by the amplifier, and to overcome the slow gain recovery. This leads to an effective recovery time of less than 1.8 ps for the wavelength converter. The wavelength converter has a simple configuration and is implemented by using fiber-pigtailed components. The concept allows photonic integration

All-optical flip-flop based on coupled laser diodes

An all-optical set-reset flip-flop is presented that is based on two coupled lasers with separate cavities and lasing at different wavelengths. The lasers are coupled so that lasing in one of the lasers quenches lasing in the other laser. The flip-flop state is determined by the laser that is currently lasing. A rate-equation based model for the flip-flop is developed and used to obtain steady-state characteristics. Important properties of the system, such as the minimum coupling between lasers and the optical power required for switching, are derived from the model. These properties are primarily dependent on the laser mirror reflectivity, the inter-laser coupling, and the power emitted from one of the component lasers, affording the designer great control over the flip-flop properties. The flip-flop is experimentally demonstrated with two lasers constructed from identical semiconductor optical amplifiers (SOAs) and fiber Bragg gratings of different wavelengths. Good agreement between the theory and experiment is obtained. Furthermore, switching over a wide range of input wavelengths is shown; however, increased switching power is required for wavelengths far from the SOA gain peak.

73.7 Tb/s (96 x 3 x 256-Gb/s) mode-division-multiplexed DP-16QAM transmission with inline MM-EDFA

Transmission of a 73.7 Tb/s (96 x 3 x 256-Gb/s) DP-16QAM mode-division-multiplexed signal over 119 km of few-mode fiber transmission line incorporating an inline multi mode EDFA and a phase plate based mode (de-)multiplexer is demonstrated. Data-aided 6 x 6 MIMO digital signal processing was used to demodulate the signal. The total demonstrated net capacity, taking into account 20% of FEC-overhead and 7.5% additional overhead (Ethernet and training sequences), is 57.6 Tb/s, corresponding to a spectral efficiency of 12 bits/s/Hz.

Wavelength conversion using nonlinear polarization rotation in a single semiconductor optical amplifier

We discuss an all-optical wavelength converter based on nonlinear polarization rotation in a single semiconductor optical amplifier. We show that inverted and noninverted wavelength conversion can be realized. We also demonstrate this wavelength-conversion concept can operate over a large wavelength range. Experiments show that error-free wavelength conversion can be obtained at a bit rate of 10 Gb/s.

Optical signal processing based on self-induced polarization rotation in a semiconductor optical amplifier

We demonstrate novel optical signal processing functions based on self-induced nonlinear polarization rotation in a semiconductor optical amplifier (SOA). Numerical and experimental results are presented, which demonstrate that a nonlinear polarization switch can be employed to achieve all-optical logic. We demonstrate an all-optical header processing system, an all-optical seed pulse generator for packet synchronization, and an all-optical arbiter that can be employed for optical buffering at a bit rate of 10 Gb/s. Experimental results indicate that optical signal processing functions based on self-polarization rotation have a higher extinction ratio and a lower power operation compared with similar functions based on self-phase modulation.

Optical packet routing in IP-over-WDM networks deploying two-level optical labeling

Assigning a wavelength label as well as a label in a DPSK modulation format orthogonal to the data payload significantly increases the forwarding and routing capabilities of optical packet routers in IP-over-WDM networks.

All-optical demultiplexing of 640 to 40 Gbits/s using filtered chirp of a semiconductor optical amplifier

We present a high-capacity ultrafast all-optical time demultiplexer that can be employed to retrieve 40 gigabits/second (Gb/s) base-rate channels from a 640 Gb/s single-polarized signal. The demultiplexer utilizes ultrafast effects of filtered chirp of a semiconductor optical amplifier. Excellent demultiplexing performance is shown at very low switching powers: +8 dBm (640 Gb/s data) and -14 dBm (40 GHz clock). The demultiplexer has a simple structure and, in principle, allows monolithic integration.

All-optical logic based on ultrafast gain and index dynamics in a semiconductor optical amplifier

We investigate nonlinear carrier dynamics in a multiquantum-well semiconductor optical amplifier (SOA) in the context of ultrafast all-optical logic. A rate-equation model is presented that accounts for two-photon absorption, free-carrier absorption, self- and cross phase modulation, carrier heating, spectral, spatial hole burning, and self- and cross polarization modulation. The nonlinear refractive index dynamics is investigated theoretically and experimentally. We find nonlinear phase changes larger than /spl pi/ radians, which recovers on a timescale in the order of 1 ps. We also investigate a nonlinear AND gate that consists of an SOA that is placed in an asymmetric Mach-Zehnder interferometer. We show that the gate can be operated using 800-fJ optical pulses with duration of 200 fs while having a contrast ratio larger than 11 dB.