Hergen Breitzke

Visible Light Photocatalysis with c-WO3–x/WO3×H2O Nanoheterostructures In Situ Formed in Mesoporous Polycarbosilane-Siloxane Polymer

In recent years, there have been significant efforts to find novel photocatalytic materials with improved properties. Thus, there is an active ongoing search for new materials that can operate at a broad range of wavelengths for photocatalytic reactions. Among photocatalytically active semiconductors, considerable attention has been given to tungsten oxide with a band gap of E(g) ≈ 2.6 eV, which provides the opportunity to harvest visible light. In the present work, we report on a one-step synthesis of c-WO(3-x)/WO3×H2O nanowhiskers dispersed in a hydrolytically stable mesoporous polycarbosilane-siloxane ([-Si(O)CH2-]n) matrix. The as-synthesized nanocomposites possess high photocatalytic activity for the degradation of methylene blue (MB) under visible light irradiation. The enhanced photocatalytic activity is due to (i) the reduction in the electron-hole recombination rate because of the reduced dimensions of nanowhiskers, (ii) more efficient consumption of photogenerated electrons and holes as a result of the high surface-to-bulk-ratio of the nanowhiskers, and (iii) better electron-hole pair separation due to the formation of c-WO(3-x)/WO3×H2O nanoheterostructures.

Formation of a unique zinc carbamate by CO2 fixation: implications for the reactivity of tetra-azamacrocycle ligated Zn(II) complexes.

The macrocyclic ligand [13]aneN 4 ( L1, 1,4,7,10-tetra-azacyclotridecane) was reacted with Zn(II) perchlorate and CO 2 in an alkaline methanol solution. It was found that, by means of subtle changes in reaction conditions, two types of complexes can be obtained: (a) the mu 3 carbonate complex 1, {[Zn( L1)] 3(mu 3-CO 3)}(ClO 4) 4, rhombohedral crystals, space group R3 c, with pentacoordinate zinc in a trigonal bipyramidal enviroment, and (b) an unprecedenced dimeric Zn(II) carbamate structure, 2, [Zn( L2)] 2(ClO 4) 2, monoclinic crystals, space group P2 1/ n. The ligand L2 (4-carboxyl-1,4,7,10-tetra-azacyclotridecane) is a carbamate derivative of L1, obtained by transformation of a hydrogen atom of one of the NH moieties into carbamate by means of CO 2 uptake. In compound 2, the distorted tetrahedral Zn(II) coordinates to the carbamate moiety in a monodentate manner. Most notably, carbamate formation can occur upon reaction of CO 2 with the [Zn L1] (2+) complex, which implicates that a Zn-N linkage is cleaved upon attack of CO 2. Since complexes of tetra-azamacrocycles and Zn(II) are routinely applied for enzyme model studies, this finding implies that the Zn-azamacrocycle moiety generally should no longer be considered to play always only an innocent role in reactions. Rather, its reactivity has to be taken into account in respective investigations. In the presence of water, 2 is transformed readily into carbonate 1. Both compounds have been additionally characterized by solid-state NMR and infrared spectroscopy. A thorough comparison of 1 with related azamacrocycle ligated zinc(II) carbonates as well as a discussion of plausible reaction paths for the formation of 2 are given. Furthermore, the infrared absorptions of the carbamate moiety have been assigned by calculating the vibrational modes of the carbamate complex using DFT methods and the vibrational spectroscopy calculation program package SNF.

Single-Source-Precursor Synthesis of Hafnium-Containing Ultrahigh-Temperature Ceramic Nanocomposites (UHTC-NCs)

Amorphous SiHfBCN ceramics were prepared from a commercial polysilazane (HTT 1800, AZ-EM), which was modified upon reactions with Hf(NEt2)4 and BH3·SMe2, and subsequently cross-linked and pyrolyzed. The prepared materials were investigated with respect to their chemical and phase composition, by means of spectroscopy techniques (Fourier transform infrared (FTIR), Raman, magic-angle spinning nuclear magnetic resonance (MAS NMR)), as well as X-ray diffraction (XRD) and transmission electron microscopy (TEM). Annealing experiments of the SiHfBCN samples in an inert gas atmosphere (Ar, N2) at temperatures in the range of 1300-1700 °C showed the conversion of the amorphous materials into nanostructured UHTC-NCs. Depending on the annealing atmosphere, HfC/HfB2/SiC (annealing in argon) and HfN/Si3N4/SiBCN (annealing in nitrogen) nanocomposites were obtained. The results emphasize that the conversion of the single-phase SiHfBCN into UHTC-NCs is thermodynamically controlled, thus allowing for a knowledge-based preparative path toward nanostructured ultrahigh-temperature stable materials with adjusted compositions.

New Insight into the Mode of Action of Nickel Superoxide Dismutase by Investigating Metallopeptide Substrate Models

For the first time, the existence of a substrate adduct of a nickel superoxide dismutase (NiSOD) model, based on the first nine residues from the N terminus of the active form of Streptomyces coelicolor NiSOD, has been proven and the adduct has been isolated. This adduct is based on the cyanide anion (CN(-)), as a substrate analogue of the superoxide anion (O(2)(*-)), and the nickel metallopeptide H-HCDLPCGVY-NH(2)-Ni. Spectroscopic studies, including IR, UV/Vis, and liquid- and solid-state NMR spectroscopy, show a single nickel-bound cyanide anion, which is embedded in the metallopeptide structure. This complex sheds new light on the question of whether the mode of action of the NiSOD enzyme is an inner- or outer-sphere mechanism. Whereas discussion was previously biased in favor of an outer-sphere electron-transfer mechanism due to the fact that binding of cyanide or azide moieties to the nickel active site had never been observed, our results are a clear indication in favor of the inner-sphere electron-transfer mechanism for the disproportionation of the O(2)(*-) ion, whereby the substrate is attached to the Ni atom in the active site of the NiSOD.

Natural Abundance 15N NMR by Dynamic Nuclear Polarization: Fast Analysis of Binding Sites of a Novel Amine‐Carboxyl‐Linked Immobilized Dirhodium Catalyst

A novel heterogeneous dirhodium catalyst has been synthesized. This stable catalyst is constructed from dirhodium acetate dimer (Rh2(OAc)4) units, which are covalently linked to amine- and carboxyl-bifunctionalized mesoporous silica (SBA-15-NH2-COOH). It shows good efficiency in catalyzing the cyclopropanation reaction of styrene and ethyl diazoacetate (EDA) forming cis- and trans-1-ethoxycarbonyl-2-phenylcyclopropane. To characterize the structure of this catalyst and to confirm the successful immobilization, heteronuclear solid-state NMR experiments have been performed. The high application potential of dynamic nuclear polarization (DNP) NMR for the analysis of binding sites in this novel catalyst is demonstrated. Signal-enhanced (13)C CP MAS and (15)N CP MAS techniques have been employed to detect different carboxyl and amine binding sites in natural abundance on a fast time scale. The interpretation of the experimental chemical shift values for different binding sites has been corroborated by quantum chemical calculations on dirhodium model complexes.

Ultra-light nanocomposite aerogels of bacterial cellulose and reduced graphene oxide for specific absorption and separation of organic liquids

Novel materials based on sustainable materials with high absorption capacity are still rare for the separation of organic liquids or oil spills and water. In this report, ultra-light nanocomposite aerogels consisting of sustainable bacterial cellulose (BC) and graphene oxide (GO) were constructed after an eco-friendly freeze-drying process for the first time. Due to the hydrophilic properties of both materials and the highly porous structure, BC/GO aerogels could highly absorb not only organic liquids, such as cyclohexane and DMF, but also water. Specific absorption for organic liquids was achieved after the reduction of GO using H2 gas, which led to nanocomposite aerogels of BC and reduced GO. They could specifically absorb 135–150 g organic liquids per g of their own weight, even with a high content of 80% BC in the nanocomposite aerogel.

2H solid-state NMR of ruthenium complexes.

The (2)H solid-state NMR spectra of the transition metal complexes Tp*RuD(THT)(2) (1a), Tp*RuD(D(2))(THT) (1b), Tp*RuD(D(2))(2) (1c), Cp*RuD(3)(PPh(3)) (2) and RuD(2)(eta(2)-D(2))(2)(PCy(3))(2) (3) have been measured in a wide temperature range. These compounds were chosen as potential model systems for hydrogen surface species in Ru-nanoparticles. The deuterium quadrupolar coupling constants Q(cc) and asymmetry parameters were extracted by (2)H NMR line-shape analysis. The Q(cc) values of the deuterons bound to the metal vary between 13 kHz and 76 kHz. In addition all spectra show that some of the deuterium is incorporated into carbon positions exhibiting quadrupolar coupling constants in the range of 134 kHz to 192 kHz. The room temperature spectra contain an additional weak very narrow line which was assigned to deuterons exhibiting a high mobility. These deuterons are attributed to crystallographic impurity and partially to D(2) molecules which lost by the complexes. The temperature where their motion is quenched and the types of these motions depend on the chemical structure. We propose to use the values of the quadrupolar coupling constants measured in order to characterize different hydrogen species on the surface of Ru-nanoparticles.

Synthesis, Solid-State NMR Characterization, and Application for Hydrogenation Reactions of a Novel Wilkinson’s-Type Immobilized Catalyst

Silica nanoparticles (SiNPs) were chosen as a solid support material for the immobilization of a new Wilkinsons-type catalyst. In a first step, polymer molecules (poly(triphenylphosphine)ethylene (PTPPE); 4-diphenylphosphine styrene as monomer) were grafted onto the silica nanoparticles by surface-initiated photoinferter-mediated polymerization (SI-PIMP). The catalyst was then created by binding rhodium (Rh) to the polymer side chains, with RhCl3⋅x H2O as a precursor. The triphenylphosphine units and rhodium as Rh(I) provide an environment to form Wilkinsons catalyst-like structures. Employing multinuclear ((31)P, (29)Si, and (13)C) solid-state NMR spectroscopy (SSNMR), the structure of the catalyst bound to the polymer and the intermediates of the grafting reaction have been characterized. Finally, first applications of this catalyst in hydrogenation reactions employing para-enriched hydrogen gas (PHIP experiments) and an assessment of its leaching properties are presented.

Solid-state NMR characterization of Wilkinson's catalyst immobilized in mesoporous SBA-3 silica.

The Wilkinsons catalyst [RhCl(PPh(3))(3)] has been immobilized inside the pores of amine functionalized mesoporous silica material SBA-3 and The structure of the modified silica surface and the immobilized rhodium complex was determined by a combination of different solid-state NMR methods. The successful modification of the silica surface was confirmed by (29)Si CP-MAS NMR experiments. The presence of the T(n) peaks confirms the successful functionalization of the support and shows the way of binding the organic groups to the surface of the mesopores. (31)P-(31)P J-resolved 2D MAS NMR experiments were conducted in order to characterize the binding of the immobilized catalyst to the amine groups of the linkers attached to the silica surface. The pure catalyst exhibits a considerable (31)P-(31)P J-coupling, well resolvable in 2D MAS NMR experiments. This J-coupling was utilized to determine the binding mode of the catalyst to the linkers on the silica surface and the number of triphenylphosphine ligands that are replaced by coordination bonds to the amine groups. From the absence of any resolvable (31)P-(31)P J-coupling in off-magic-angle-spinning experiments, as well as slow-spinning MAS experiments, it is concluded, that two triphenylphosphine ligands are replaced and that the catalyst is bonded to the silica surface through two linker molecules.

51V solid-state NMR investigations and DFT studies of model compounds for vanadium haloperoxidases

Three cis-dioxovanadium(V) complexes with similar N-salicylidenehydrazide ligands modeling hydrogen bonding interactions of vanadate relevant for vanadium haloperoxidases are studied by (51)V solid-state NMR spectroscopy. Their parameters describing the quadrupolar and chemical shift anisotropy interactions (quadrupolar coupling constant C(Q), asymmetry of the quadrupolar tensor eta(Q), isotropic chemical shift delta(iso), chemical shift anisotropy delta(sigma), asymmetry of the chemical shift tensor eta(sigma) and the Euler angles alpha, beta and gamma) are determined both experimentally and theoretically using DFT methods. A comparative study of different methods to determine the NMR parameters by numerical simulation of the spectra is presented. Detailed theoretical investigations on the DFT level using various basis sets and structural models show that by useful choice of the methodology, the calculated parameters agree to the experimental ones in a very good manner.