Homin Jiang

The AMiBA Hexapod Telescope Mount

The Array for Microwave Background Anisotropy (AMiBA) is the largest hexapod astronomical telescope in current operation. We present a description of this novel hexapod mount with its main mechanical components—the support cone, universal joints, jack screws, and platform—and outline the control system with the pointing model and the operating modes that are supported. The AMiBA hexapod mount performance is verified based on optical pointing tests and platform photogrammetry measurements. The photogrammetry results show that the deformations in the inner part of the platform are less than 120 μm rms. This is negligible for optical pointing corrections, radio alignment, and radio phase errors for the currently operational seven-element compact configuration. The optical pointing error in azimuth and elevation is successively reduced by a series of corrections to about 0 4 rms which meets our goal for the seven-element target specifications.

Greenland telescope project: Direct confirmation of black hole with sub‐millimeter VLBI

A 12 m diameter radio telescope will be deployed to the Summit Station in Greenland to provide direct confirmation of a Super Massive Black Hole (SMBH) by observing its shadow image in the active galaxy M87. The telescope (Greenland Telescope: GLT) is to become one of the Very Long Baseline Interferometry (VLBI) stations at sub-millimeter (submm) regime, providing the longest baseline >9000 km to achieve an exceptional angular resolution of 20 µas at 350 GHz, which will enable us to resolve the shadow size of ~40 µas. The triangle with the longest baselines formed by the GLT, the Atacama Large Millimeter/submillimeter Array (ALMA) in Chile, and the Submillimeter Array (SMA) in Hawaii will play a key role for the M87 observations. We have been working on the image simulations based on realistic conditions for a better understanding of the possible observed images. In parallel, retrofitting of the telescope and the site developments are in progress. Based on 3 years of opacity monitoring at 225 GHz, our measurements indicate that the site is excellent for submm observations, comparable to the ALMA site. The GLT is also expected to make single-dish observations up to 1.5 THz.

A Decade of Developing Radio-Astronomy Instrumentation using CASPER Open-Source Technology

The Collaboration for Astronomy Signal Processing and Electronics Research (CASPER) has been working for a decade to reduce the time and cost of designing, building and deploying new digital radio-astronomy instruments. Today, CASPER open-source technology powers over 45 scientific instruments worldwide, and is used by scientists and engineers at dozens of academic institutions. In this paper, we catalog the current offerings of the CASPER collaboration, and instruments past and present built by CASPER users and developers. We describe the ongoing state of software development, as CASPER looks to support a broader range of programming environments and hardware and ensure compatibility with the latest vendor tools.

AMiBA WIDEBAND ANALOG CORRELATOR

A wideband analog correlator has been constructed for the Yuan-Tseh Lee Array for Microwave Background Anisotropy. Lag correlators using analog multipliers provide large bandwidth and moderate frequency resolution. Broadband intermediate frequency distribution, back-end signal processing, and control are described. Operating conditions for optimum sensitivity and linearity are discussed. From observations, a large effective bandwidth of around 10 GHz has been shown to provide sufficient sensitivity for detecting cosmic microwave background variations.

Progress of the array of microwave background anisotropy (AMiBA)

The Academia Sinica, Institute for Astronomy and Astrophysics (ASIAA) is installing the AMiBA interferometric array telescope at the Mauna Loa Observatory, Hawaii. The 6-meter carbon fiber fully steerable platform is mounted on the Hexapod Mount. After integration and equipment with dummy weights, the platform has been measured by photogrammetry to verify its behavior predicted by Finite Element Analysis. The Hexapod servo control is now operational and equipment of the platform with the initial 7 60-cm dishes, the correlator and electronics is underway. Pointing has started with the aid of the optical telescope. We present the status of the telescope after the servo and initial pointing tests have been carried out. We also present the results of platform measurements by photogrammetry.

THE AMIBA PROJECT

The Array for Microwave Background Anisotropy is a 7-element interferometer to be sited on Mauna Loa, Hawaii. The seven 1.2m telescopes are mounted on a 6-meter platform, and operates at 3mm wavelength. At the time of this meeting, the telescope is under construction at the Vertex factory in Germany. It is due to be delivered in the middle of 2004. A 2-element prototype instrument has already been deployed to Mauna Loa where initial tests are underway.

A 5 Giga Samples Per Second 8-Bit Analog to Digital Printed Circuit Board for Radio Astronomy

We have designed, manufactured, and characterized an 8-bit 5 Giga samples per second (Gsps) ADC printed circuit board assembly (PCBA). An e2v EV8AQ160 ADC chip was used in the design and the board is plug compatible with the field programmable gate array (FPGA) board developed by the Collaboration for Astronomy Signal Processing and Electronics Research (CASPER) community. Astronomical interference fringes were demonstrated across a single baseline pair of antennas using two ADC boards on the Yuan Tseh Lee Array for Microwave Background Anisotropy (AMiBA) telescope. Several radio interferometers are using this board for bandwidth expansion, such as Submillimeter Array; also, several experimental telescopes are building new spectrometers using the same board. The ADC boards were attached directly to the Reconfigurable Open Architecture Computing Hardware (ROACH-2) FPGA board for processing of the digital output signals. This ADC board provides the capability of digitizing radio frequency signals from DC to 2 GHz (3 dB bandwidth), and to an extended bandwidth of 2.5 GHz (5 dB) with derated performance. The following worst-case performance parameters were obtained over 2 GHz: spur free dynamic range (SFDR) of 44 dB, signal-to-noise and distortion (SINAD) of 35 dB, and effective number of bits (ENOB) of 5.5.

Platform deformation refined pointing and phase correction for the AMiBA hexapod telescope

The Array for Microwave Background Anisotropy (AMiBA) is a radio interferometer for research in cosmology, currently operating 7 0.6m diameter antennas co-mounted on a 6m diameter platform driven by a hexapod mount. AMiBA is currently the largest hexapod telescope. We briefly summarize the hexapod operation with the current pointing error model. We then focus on the upcoming 13-element expansion with its potential difficulties and solutions. Photogrammetry measurements of the platform reveal deformations at a level which can affect the optical pointing and the receiver radio phase. In order to prepare for the 13-element upgrade, two optical telescopes are installed on the platform to correlate optical pointing tests. Being mounted on different locations, the residuals of the two sets of pointing errors show a characteristic phase and amplitude difference as a function of the platform deformation pattern. These results depend on the telescopes azimuth, elevation and polarization position. An analytical model for the deformation is derived in order to separate the local deformation induced error from the real hexapod pointing error. Similarly, we demonstrate that the deformation induced radio phase error can be reliably modeled and calibrated, which allows us to recover the ideal synthesized beam in amplitude and shape of up to 90% or more. The resulting array efficiency and its limits are discussed based on the derived errors.

A distributed control system for a radio telescope with six-meter hexapod mount

We report the operation and control system of the Array for Microwave Background Anisotropy (AMIBA), a radio astronomical telescope which has been completed and operating smoothly on the summit of Mauna Loa, Hawaii since 2005. The telescope mount with six meters diameter is the largest steward platform ever employed for astronomical purposes.

AMiBA: Cluster Sunyaev-Zel'dovich Effect Observations with the Expanded 13-Element Array

The Yuan-Tseh Lee Array for Microwave Background Anisotropy (AMiBA) is a co-planar interferometer array operating at a wavelength of 3 mm to measure the Sunyaev-Zel’dovich effect (SZE) of galaxy clusters at arcminute scales. The first phase of operation ‐ with a compact 7-element array with 0.6 m antennas (AMiBA7) ‐ observed six clusters at angular scales from 5 0 to 23 0 . Here, we describe the expansion of AMiBA to a 13-element array with 1.2 m antennas (AMiBA-13), its subsequent commissioning, and cluster SZE observing program. The most noticeable changes compared to AMiBA-7 are (1) array re-configuration with baselines ranging from 1.4 m to 4.8 m, allowing us to sample structures between 2 0 and 10 0 , (2) thirteen new lightweight carbon-fiber-reinforced plastic (CFRP) 1.2 m reflectors, and (3) additional correlators and six new receivers. Since the reflectors are co-mounted on and distributed over the entire six-meter CFRP platform, a refined hexapod pointing error model and phase error correction scheme have been developed for AMiBA-13. These effects ‐ entirely negligible for the earlier central close-packed AMiBA-7 configuration ‐ can lead to additional geometrical delays during observations. Our correction scheme recovers at least 80 5% of point source fluxes. We, therefore, apply an upward correcting factor of 1.25 to our visibilities to correct for phase decoherence, and a 5% systematic uncertainty is added in quadrature with our statistical errors. We demonstrate the absence of further systematics with a noise level consistent with zero in stackeduv-visibilities. From the AMiBA-13 SZE observing program, we present here maps of a subset of twelve clusters with signal-to-noise ratios above five. We demonstrate combining AMiBA-7 with AMiBA-13 observations on Abell 1689, by jointly fitting their data to a generalized Navarro‐Frenk‐White (gNFW) model. Our cylindrically-integrated Compton-y values for five radii are consistent with results from the Berkeley-Illinois-Maryland Array (BIMA), Owens Valley Radio Observatory (OVRO), Sunyaev-Zel’dovich Array (SZA), and the Planck Observatory. We also report the first targeted SZE detection towards the optically selected cluster RCS J1447+0828, and we demonstrate the ability of AMiBA SZE data to serve as a proxy for the total cluster mass. Finally, we show that our AMiBA-SZE derived cluster masses are consistent with recent lensing mass measurements in the literature. Subject headings: cosmology: cosmic background radiation — galaxies: clusters: general — instrumentation: interferometers