Huanxin Ju

Single Cobalt Atoms with Precise N‐Coordination as Superior Oxygen Reduction Reaction Catalysts

A new strategy for achieving stable Co single atoms (SAs) on nitrogen-doped porous carbon with high metal loading over 4 wt % is reported. The strategy is based on a pyrolysis process of predesigned bimetallic Zn/Co metal-organic frameworks, during which Co can be reduced by carbonization of the organic linker and Zn is selectively evaporated away at high temperatures above 800 °C. The spherical aberration correction electron microscopy and extended X-ray absorption fine structure measurements both confirm the atomic dispersion of Co atoms stabilized by as-generated N-doped porous carbon. Surprisingly, the obtained Co-Nx single sites exhibit superior ORR performance with a half-wave potential (0.881 V) that is more positive than commercial Pt/C (0.811 V) and most reported non-precious metal catalysts. Durability tests revealed that the Co single atoms exhibit outstanding chemical stability during electrocatalysis and thermal stability that resists sintering at 900 °C. Our findings open up a new routine for general and practical synthesis of a variety of materials bearing single atoms, which could facilitate new discoveries at the atomic scale in condensed materials.

Suppressed Charge Recombination in Inverted Organic Photovoltaics via Enhanced Charge Extraction by Using a Conductive Fullerene Electron Transport Layer

Conductive fullerene electron-transporting layers (ETLs) are developed to facilitate the solution processing of highly efficient inverted OSCs with power conversion efficiency (PCE) reaching 9.6%. Its high conductivity also allows devices to be fabricated independently of the ETL thickness (up to ca. 50 nm). Transient photovoltage (TPV) measurements are used to shed light on how these conductive ETLs help suppress charge recombination in solar cells.

Oxide Defect Engineering Enables to Couple Solar Energy into Oxygen Activation

Modern development of chemical manufacturing requires a substantial reduction in energy consumption and catalyst cost. Sunlight-driven chemical transformation by metal oxides holds great promise for this goal; however, it remains a grand challenge to efficiently couple solar energy into many catalytic reactions. Here we report that defect engineering on oxide catalyst can serve as a versatile approach to bridge light harvesting with surface reactions by ensuring species chemisorption. The chemisorption not only spatially enables the transfer of photoexcited electrons to reaction species, but also alters the form of active species to lower the photon energy requirement for reactions. In a proof of concept, oxygen molecules are activated into superoxide radicals on defect-rich tungsten oxide through visible-near-infrared illumination to trigger organic aerobic couplings of amines to corresponding imines. The excellent efficiency and durability for such a highly important process in chemical transformation can otherwise be virtually impossible to attain by counterpart materials.

Implementing Metal‐to‐Ligand Charge Transfer in Organic Semiconductor for Improved Visible‐Near‐Infrared Photocatalysis

The coordination of organic semiconductors with metal cations can induce metal-to-ligand charge transfer, which broadens light absorption to cover the visible-near-infrared (vis-NIR) spectrum. As a proof-of-concept demonstration, the g-C3 N4 -based complex exhibits dramatically enhanced photocatalytic H2 production with excellent durability under vis-NIR irradiation.

Uncoordinated Amine Groups of Metal–Organic Frameworks to Anchor Single Ru Sites as Chemoselective Catalysts toward the Hydrogenation of Quinoline

Here we report a precise control of isolated single ruthenium site supported on nitrogen-doped porous carbon (Ru SAs/N-C) through a coordination-assisted strategy. This synthesis is based on the utilization of strong coordination between Ru3+ and the free amine groups (-NH2) at the skeleton of a metal-organic framework, which plays a critical role to access the atomically isolated dispersion of Ru sites. Without the assistance of the amino groups, the Ru precursor is prone to aggregation during the pyrolysis process, resulting in the formation of Ru clusters. The atomic dispersion of Ru on N-doped carbon can be verified by the spherical aberration correction electron microscopy and X-ray absorption fine structure measurements. Most importantly, this single Ru sites with single-mind N coordination can serve as a semihomogeneous catalyst to catalyze effectively chemoselective hydrogenation of functionalized quinolones.

Exclusive Ni–N4 Sites Realize Near-Unity CO Selectivity for Electrochemical CO2 Reduction

Electrochemical reduction of carbon dioxide (CO2) to value-added carbon products is a promising approach to reduce CO2 levels and mitigate the energy crisis. However, poor product selectivity is still a major obstacle to the development of CO2 reduction. Here we demonstrate exclusive Ni-N4 sites through a topo-chemical transformation strategy, bringing unprecedentedly high activity and selectivity for CO2 reduction. Topo-chemical transformation by carbon layer coating successfully ensures preservation of the Ni-N4 structure to a maximum extent and avoids the agglomeration of Ni atoms to particles, providing abundant active sites for the catalytic reaction. The Ni-N4 structure exhibits excellent activity for electrochemical reduction of CO2 with particularly high selectivity, achieving high faradaic efficiency over 90% for CO in the potential range from -0.5 to -0.9 V and gives a maximum faradaic efficiency of 99% at -0.81 V with a current density of 28.6 mA cm-2. We anticipate exclusive catalytic sites will shed new light on the design of high-efficiency electrocatalysts for CO2 reduction.

Atomically Dispersed Ru on Ultrathin Pd Nanoribbons

We report a one-pot synthesis of atomically dispersed Ru on ultrathin Pd nanoribbons. By using synchrotron radiation photoemission spectroscopy (SRPES) and extended X-ray absorption fine structure (EXAFS) measurements in combination with aberration corrected high-resolution transmission electron microscopy (HRTEM), we show that atomically dispersed Ru with content up to 5.9% was on the surface of the ultrathin nanoribbon. Furthermore, the ultrathin Pd/Ru nanoribbons could remarkably prohibit the hydrogenolysis in chemoselective hydrogenation of C═C bonds, leading to an excellent catalytic selectivity compared with commercial Pd/C and Ru/C.

Suppression of Structural Phase Transition in VO2 by Epitaxial Strain in Vicinity of Metal-insulator Transition

Mechanism of metal-insulator transition (MIT) in strained VO2 thin films is very complicated and incompletely understood despite three scenarios with potential explanations including electronic correlation (Mott mechanism), structural transformation (Peierls theory) and collaborative Mott-Peierls transition. Herein, we have decoupled coactions of structural and electronic phase transitions across the MIT by implementing epitaxial strain on 13-nm-thick (001)-VO2 films in comparison to thicker films. The structural evolution during MIT characterized by temperature-dependent synchrotron radiation high-resolution X-ray diffraction reciprocal space mapping and Raman spectroscopy suggested that the structural phase transition in the temperature range of vicinity of the MIT is suppressed by epitaxial strain. Furthermore, temperature-dependent Ultraviolet Photoelectron Spectroscopy (UPS) revealed the changes in electron occupancy near the Fermi energy EF of V 3d orbital, implying that the electronic transition triggers the MIT in the strained films. Thus the MIT in the bi-axially strained VO2 thin films should be only driven by electronic transition without assistance of structural phase transition. Density functional theoretical calculations further confirmed that the tetragonal phase across the MIT can be both in insulating and metallic states in the strained (001)-VO2/TiO2 thin films. This work offers a better understanding of the mechanism of MIT in the strained VO2 films.

Noble-Metal-Free Janus-like Structures by Cation Exchange for Z-Scheme Photocatalytic Water Splitting under Broadband Light Irradiation

Z-scheme water splitting is a promising approach based on high-performance photocatalysis by harvesting broadband solar energy. Its efficiency depends on the well-defined interfaces between two semiconductors for the charge kinetics and their exposed surfaces for chemical reactions. Herein, we report a facile cation-exchange approach to obtain compounds with both properties without the need for noble metals by forming Janus-like structures consisting of γ-MnS and Cu7 S4 with high-quality interfaces. The Janus-like γ-MnS/Cu7 S4 structures displayed dramatically enhanced photocatalytic hydrogen production rates of up to 718 μmol g-1  h-1 under full-spectrum irradiation. Upon further integration with an MnOx oxygen-evolution cocatalyst, overall water splitting was accomplished with the Janus structures. This work provides insight into the surface and interface design of hybrid photocatalysts, and offers a noble-metal-free approach to broadband photocatalytic hydrogen production.

Towards full-spectrum photocatalysis: Achieving a Z-scheme between Ag2S and TiO2 by engineering energy band alignment with interfacial Ag

A Z-scheme is a promising approach to achieve broad-spectrum photocatalysis. Integration of TiO2 with another semiconductor with a band gap of ∼1.0 eV would be ideal to harvest both ultraviolet and visible-near infrared light for photocatalysis; however, most narrow-bandgap semiconductors have straddling band structure alignments with TiO2, constituting an obstacle to forming the Z-scheme for photocatalytic hydrogen production. In this communication, we demonstrate Ag2S as a model system where the energy band upshift of the narrow-bandgap semiconductor that shares an interface with a metal can overcome this limitation. To fabricate the design, we developed a unique approach to synthesize Ag2S–Ag–TiO2 hybrid structures. The obtained ternary hybrid structures exhibited dramatically enhanced performance in photocatalytic hydrogen production under full-spectrum light illumination. The activities were significantly higher than the sum of those of Ag2S–Ag–TiO2 structures under λ < 400 nm and λ > 400 nm irradiation as well as those of their counterparts under any light illumination conditions.