Hyunseob Lim

Spatially Resolved Spontaneous Reactivity of Diazonium Salt on Edge and Basal Plane of Graphene without Surfactant and Its Doping Effect

The site-dependent and spontaneous functionalization of 4-bromobenzene diazonium tetrafluoroborate (4-BBDT) and its doping effect on a mechanically exfoliated graphene (MEG) were investigated. The spatially resolved Raman spectra obtained from both edge and basal region of MEG revealed that 4-BBDT molecules were noncovalently functionalized on the basal region of MEG, while they were covalently bonded to the edge of MEG. The chemical doping effect induced by noncovalently functionalized 4-BBDT molecules on a basal plane region of MEG was successfully explicated by Raman spectroscopy. The position of Fermi level of MEG and the type of doping charge carrier induced by the noncovalently adsorbed 4-BBDT molecules were determined from systematic G band and 2D band changes. The successful spectroscopic elucidation of the different bonding characters of 4-BBDT depending on the site of graphene is beneficial for the fundamental studies about the charge transfer phenomena of graphene as well as for the potential applications, such as electronic devices, hybridized composite structures, etc.

Real-Time XRD Studies of Li-O2 Electrochemical Reaction in Nonaqueous Lithium-Oxygen Battery.

Understanding of electrochemical process in rechargeable Li-O2 battery has suffered from lack of proper analytical tool, especially related to the identification of chemical species and number of electrons involved in the discharge/recharge process. Here we present a simple and straightforward analytical method for simultaneously attaining chemical and quantified information of Li2O2 (discharge product) and byproducts using in situ XRD measurement. By real-time monitoring of solid-state Li2O2 peak area, the accurate efficiency of Li2O2 formation and the number of electrons can be evaluated during full discharge. Furthermore, by observation of sequential area change of Li2O2 peak during recharge, we found nonlinearity of Li2O2 decomposition rate for the first time in ether-based electrolyte.

Direct growth of graphene pad on exfoliated hexagonal boron nitride surface

A direct and metal layer-free growth of flat graphene pads on exfoliated hexagonal boron nitride substrate (h-BN) are demonstrated by atmospheric chemical vapour deposition (CVD) process. Round shape with high flatness graphene pads are grown in high yield (∼95%) with a pad thickness of ∼0.5 nm and homogenous diameter.

Probing Evolution of Twist-Angle-Dependent Interlayer Excitons in MoSe2/WSe2 van der Waals Heterostructures

Interlayer excitons were observed at the heterojunctions in van der Waals heterostructures (vdW HSs). However, it is not known how the excitonic phenomena are affected by the stacking order. Here, we report twist-angle-dependent interlayer excitons in MoSe2/WSe2 vdW HSs based on photoluminescence (PL) and vdW-corrected density functional theory calculations. The PL intensity of the interlayer excitons depends primarily on the twist angle: It is enhanced at coherently stacked angles of 0° and 60° (owing to strong interlayer coupling) but disappears at incoherent intermediate angles. The calculations confirm twist-angle-dependent interlayer coupling: The states at the edges of the valence band exhibit a long tail that stretches over the other layer for coherently stacked angles; however, the states are largely confined in the respective layers for intermediate angles. This interlayer hybridization of the band edge states also correlates with the interlayer separation between MoSe2 and WSe2 layers. Furthermore, the interlayer coupling becomes insignificant, irrespective of twist angles, by the incorporation of a hexagonal boron nitride monolayer between MoSe2 and WSe2.

Catalytic Conversion of Hexagonal Boron Nitride to Graphene for In-Plane Heterostructures

Heterostructures of hexagonal boron nitride (h-BN) and graphene have attracted a great deal of attention for potential applications in 2D materials. Although several methods have been developed to produce this material through the partial substitution reaction of graphene, the reverse reaction has not been reported. Though the endothermic nature of this reaction might account for the difficulty and previous absence of such a process, we report herein a new chemical route in which the Pt substrate plays a catalytic role. We propose that this reaction proceeds through h-BN hydrogenation; subsequent graphene growth quickly replaces the initially etched region. Importantly, this conversion reaction enables the controlled formation of patterned in-plane graphene/h-BN heterostructures, without needing the commonly employed protecting mask, simply by using a patterned Pt substrate.

Controlled Folding of Single Crystal Graphene

Folded graphene in which two layers are stacked with a twist angle between them has been predicted to exhibit unique electronic, thermal, and magnetic properties. We report the folding of a single crystal monolayer graphene film grown on a Cu(111) substrate by using a tailored substrate having a hydrophobic region and a hydrophilic region. Controlled film delamination from the hydrophilic region was used to prepare macroscopic folded graphene with good uniformity on the millimeter scale. This process was used to create many folded sheets each with a defined twist angle between the two sheets. By identifying the original lattice orientation of the monolayer graphene on Cu foil, or establishing the relation between the fold angle and twist angle, this folding technique allows for the preparation of twisted bilayer graphene films with defined stacking orientations and may also be extended to create folded structures of other two-dimensional nanomaterials.

Self-organization of S adatoms on Au(111): √3R30° rows at low coverage

Using scanning tunneling microscopy, we observe an adlayer structure that is dominated by short rows of S atoms, on unreconstructed regions of a Au(111) surface. This structure forms upon adsorption of low S coverage (less than 0.1 monolayer) on a fully reconstructed clean surface at 300 K, then cooling to 5 K for observation. The rows adopt one of three orientations that are rotated by 30° from the close-packed directions of the Au(111) substrate, and adjacent S atoms in the rows are separated by √3 times the surface lattice constant, a. Monte Carlo simulations are performed on lattice-gas models, derived using a limited cluster expansion based on density functional theory energetics. Models which include long-range pairwise interactions (extending to 5a), plus selected trio interactions, successfully reproduce the linear rows of S atoms at reasonable temperatures.

Silencing of Metallic Single-Walled Carbon Nanotubes via Spontaneous Hydrosilylation†

Noncovalent approaches havebeen considered appropriate to softly modify the surfaceproperties of carbon nanotubes sufficient for chemical andbiological applications. However, the importance of thedevelopment of covalent bond-forming chemical reactionshas recently been refocused on, since the strategically drivencovalent bonds are known to promptly alter the electricalproperties of carbon nanotubes to secure a high population ofsemiconducting carbon nanotubes from mixtures.

Hexagonal Boron Nitride/Au Substrate for Manipulating Surface Plasmon and Enhancing Capability of Surface-Enhanced Raman Spectroscopy

We report on an insulating two-dimensional material, hexagonal boron nitride (h-BN), which can be used as an effective wrapping layer for surface-enhanced Raman spectroscopy (SERS) substrates. This material exhibits outstanding characteristics such as its crystallinity, impermeability, and thermal conductance. Improved SERS sensitivity is confirmed for Au substrates wrapped with h-BN, the mechanism of which is investigated via h-BN thickness-dependent experiments combined with theoretical simulations. The investigations reveal that a stronger electromagnetic field can be generated at the narrowed gap of the h-BN surface, which results in higher Raman sensitivity. Moreover, the h-BN-wrapped Au substrate shows extraordinary stability against photothermal and oxidative damages. We also describe its capability to detect specific chemicals that are difficult to analyze using conventional SERS substrates. We believe that this concept of using an h-BN insulating layer to protect metallic or plasmonic materials will be widely used not only in the field of SERS but also in the broader study of plasmonic and optoelectronic devices.

Lithium Ions Intercalated into Pyrene-Functionalized Carbon Nanotubes and Their Mass Transport: A Chemical Route to Carbon Nanotube Schottky Diode

We developed a facile chemical route by which single-walled carbon nanotube (SWNT) Schottky diodes are realized. When a bias voltage was applied to a lithium ion intercalated SWNT field effect transistor (FET) device, lithium ions intercalated between 1-pyrenmethylamine (1-PMA), and SWNTs are migrated to the drain (−) electrode to be reduced at the junction of SWNT and drain metal electrode. As a result, asymmetric work function energy levels are formed between both junctions of SWNT−drain and SWNT−source, resulting in a Schottky diode. Using scanning photoelectron microscopy (SPEM) and space-resolved X-ray photoelectron spectroscopy (XPS), the mass transport of the lithium ion was qualitatively confirmed by monitoring the population distribution of lithium along the nanotube axis from the source to drain electrodes. The highest population of lithium was observed near the drain electrode. This approach is a simple and versatile process that can be further applied for the modifications of various nanomater...