Igor Bargatin

Tuning nonlinearity, dynamic range, and frequency of nanomechanical resonators

We explore an electrostatic mechanism for tuning the nonlinearity of nanomechanical resonators and increasing their dynamic range for sensor applications. We also demonstrate tuning the resonant frequency of resonators both upward and downward. A theoretical model is developed that qualitatively explains the experimental results and serves as a simple guide for design of tunable nanomechanical devices.

In-plane nanoelectromechanical resonators based on silicon nanowire piezoresistive detection.

We report an actuation/detection scheme with a top-down nanoelectromechanical system (NEMS) for frequency shift based sensing applications with outstanding performance. It relies on electrostatic actuation and piezoresistive nanowire gauges for in-plane motion transduction. The process fabrication is fully CMOS (complementary metal-oxide-semiconductor) compatible. The results show a very large dynamic range of more than 100 dB and an unprecedented signal to background ratio of 69 dB providing an improvement of two orders of magnitude in the detection efficiency presented in the state of the art in NEMS fields. Such a dynamic range results from both negligible 1/f noise and very low Johnson noise compared to the thermomechanical noise. This simple low power detection scheme paves the way for new class of robust mass resonant sensors.

Efficient electrothermal actuation of multiple modes of high-frequency nanoelectromechanical resonators

The authors observed resonances from multiple vibrational modes of individual silicon-carbide-based nanomechanical resonators, covering a broad frequency range from several megahertz to over a gigahertz. The devices are actuated thermoelastically in vacuum at room temperature using localized Joule heating in a device-integrated metal loop. Their motion is detected piezoresistively using signal downmixing in a similarly integrated metal piezoresistor. The frequencies and amplitudes of the observed resonant peaks are in good agreement with the results from theoretical modeling and finite-element simulations.

Large-Scale Integration of Nanoelectromechanical Systems for Gas Sensing Applications

We have developed arrays of nanomechanical systems (NEMS) by large-scale integration, comprising thousands of individual nanoresonators with densities of up to 6 million NEMS per square centimeter. The individual NEMS devices are electrically coupled using a combined series-parallel configuration that is extremely robust with respect to lithographical defects and mechanical or electrostatic-discharge damage. Given the large number of connected nanoresonators, the arrays are able to handle extremely high input powers (>1 W per array, corresponding to <1 mW per nanoresonator) without excessive heating or deterioration of resonance response. We demonstrate the utility of integrated NEMS arrays as high-performance chemical vapor sensors, detecting a part-per-billion concentration of a chemical warfare simulant within only a 2 s exposure period.

Sensitive detection of nanomechanical motion using piezoresistive signal downmixing

We have developed a method of measuring rf-range resonance properties of nanoelectromechanical systems (NEMS) with integrated piezoresistive strain detectors serving as signal downmixers. The technique takes advantage of the high strain sensitivity of semiconductor-based piezoresistors, while overcoming the problem of rf signal attenuation due to a high source impedance. Our technique also greatly reduces the effect of the cross-talk between the detector and actuator circuits. We achieve thermomechanical noise detection of cantilever resonance modes up to 71 MHz at room temperature, demonstrating that downmixed piezoresistive signal detection is a viable high-sensitivity method of displacement detection in high-frequency NEMS.

Photon-enhanced thermionic emission from heterostructures with low interface recombination

Photon-enhanced thermionic emission is a method of solar-energy conversion that promises to combine photon and thermal processes into a single mechanism, overcoming fundamental limits on the efficiency of photovoltaic cells. Photon-enhanced thermionic emission relies on vacuum emission of photoexcited electrons that are in thermal equilibrium with a semiconductor lattice, avoiding challenging non-equilibrium requirements and exotic material properties. However, although previous work demonstrated the photon-enhanced thermionic emission effect, efficiency has until now remained very low. Here we describe electron-emission measurements on a GaAs/AlGaAs heterostructure that introduces an internal interface, decoupling the basic physics of photon-enhanced thermionic emission from the vacuum emission process. Quantum efficiencies are dramatically higher than in previous experiments because of low interface recombination and are projected to increase another order of magnitude with more stable, low work-function coatings. The results highlight the effectiveness of the photon-enhanced thermionic emission process and demonstrate that efficient photon-enhanced thermionic emission is achievable, a key step towards realistic photon-enhanced thermionic emission based energy conversion.

Optimal emitter-collector gap for thermionic energy converters

In this letter, we calculate numerically the emitter-collector gaps that maximize the power conversion efficiency of vacuum thermionic energy converters (TECs). The optimum arises because efficiency drops both at very large gaps, due to space-charge limitations on the TEC current, and at very small gaps, due to the increased parasitic heat loss via near-field radiative heat transfer. For typical TECs made with cesiated tungsten electrodes, the optimal gaps range from 900 nm to 3 μm and are approximately equal to the characteristic wavelength of the emitter thermal radiation, as given by Wien’s displacement law.

A model for emission yield from planar photocathodes based on photon- enhanced thermionic emission or negative-electron-affinity photoemission

A general model is presented for electron emission yield from planar photocathodes that accounts for arbitrary cathode thickness and finite recombination velocities at both front and back surfaces. This treatment is applicable to negative electron affinity emitters as well as positive electron affinity cathodes, which have been predicted to be useful for energy conversion. The emission model is based on a simple one-dimensional steady-state diffusion treatment. The resulting relation for electron yield is used to model emission from thin-film cathodes with material parameters similar to GaAs. Cathode thickness and recombination at the emissive surface are found to strongly affect emission yield from cathodes, yet the magnitude of the effect greatly depends upon the emission mechanism. A predictable optimal film thickness is found from a balance between optical absorption, surface recombination, and emission rate.

Engineering Ultra-Low Work Function of Graphene

Low work function materials are critical for energy conversion and electron emission applications. Here, we demonstrate for the first time that an ultralow work function graphene is achieved by combining electrostatic gating with a Cs/O surface coating. A simple device is built from large-area monolayer graphene grown by chemical vapor deposition, transferred onto 20 nm HfO2 on Si, enabling high electric fields capacitive charge accumulation in the graphene. We first observed over 0.7 eV work function change due to electrostatic gating as measured by scanning Kelvin probe force microscopy and confirmed by conductivity measurements. The deposition of Cs/O further reduced the work function, as measured by photoemission in an ultrahigh vacuum environment, which reaches nearly 1 eV, the lowest reported to date for a conductive, nondiamond material.

Nanomechanical analog of a laser: amplification of mechanical oscillations by stimulated zeeman transitions.

We propose a magnetomechanical device that exhibits many properties of a laser. The device is formed by a nanocantilever and dynamically polarized paramagnetic nuclei of a solid sample in a strong external magnetic field. The corresponding quantum oscillator and effective two-level systems are coupled by the magnetostatic dipole-dipole interaction between a permanent magnet on the cantilever tip and the magnetic moments of the spins, so that the entire system is effectively described by the Jaynes-Cummings model. We consider the possibility of observing transient and cw lasing in this system, and show how these processes can be used to improve the sensitivity of magnetic resonance force microscopy.