Jack J. Mock

Perfect Metamaterial Absorber

We present the design for an absorbing metamaterial (MM) with near unity absorbance A(omega). Our structure consists of two MM resonators that couple separately to electric and magnetic fields so as to absorb all incident radiation within a single unit cell layer. We fabricate, characterize, and analyze a MM absorber with a slightly lower predicted A(omega) of 96%. Unlike conventional absorbers, our MM consists solely of metallic elements. The substrate can therefore be optimized for other parameters of interest. We experimentally demonstrate a peak A(omega) greater than 88% at 11.5 GHz.

Broadband ground-plane cloak.

The possibility of cloaking an object from detection by electromagnetic waves has recently become a topic of considerable interest. The design of a cloak uses transformation optics, in which a conformal coordinate transformation is applied to Maxwells equations to obtain a spatially distributed set of constitutive parameters that define the cloak. Here, we present an experimental realization of a cloak design that conceals a perturbation on a flat conducting plane, under which an object can be hidden. To match the complex spatial distribution of the required constitutive parameters, we constructed a metamaterial consisting of thousands of elements, the geometry of each element determined by an automated design process. The ground-plane cloak can be realized with the use of nonresonant metamaterial elements, resulting in a structure having a broad operational bandwidth (covering the range of 13 to 16 gigahertz in our experiment) and exhibiting extremely low loss. Our experimental results indicate that this type of cloak should scale well toward optical wavelengths.

Electric-field-coupled resonators for negative permittivity metamaterials

A lithographically patterned inductive-capacitive resonator is described that has a strong electric response. This resonator can be used to construct metamaterials with desired positive or negative permittivity. Such materials provide an alternative to wire media, and have the benefit of not requiring continuous current paths between unit cells. A planar medium composed of these resonators was simulated, fabricated, and measured in the microwave frequency range.

Probing the Ultimate Limits of Plasmonic Enhancement

Boundaries on Plasmonic Excitations The localization of optical fields within a metal nanostructure can achieve strengths that are orders of magnitude greater than that of the incident field. This focusing and enhancement of the optical field maybe useful in sensing, nonlinear optics, and optical scattering applications. In probing the properties of metallic nanoparticles, Ciracì et al. (p. 1072; see the cover) show that the enhancement is limited by the electronic response of the metal, which has implications for the ultimate performance of nanophotonic systems. The nonlocal dielectric response of metals places a fundamental limit on the performance of plasmonic optical devices. Metals support surface plasmons at optical wavelengths and have the ability to localize light to subwavelength regions. The field enhancements that occur in these regions set the ultimate limitations on a wide range of nonlinear and quantum optical phenomena. We found that the dominant limiting factor is not the resistive loss of the metal, but rather the intrinsic nonlocality of its dielectric response. A semiclassical model of the electronic response of a metal places strict bounds on the ultimate field enhancement. To demonstrate the accuracy of this model, we studied optical scattering from gold nanoparticles spaced a few angstroms from a gold film. The bounds derived from the models and experiments impose limitations on all nanophotonic systems.

Controlled-reflectance surfaces with film-coupled colloidal nanoantennas

Efficient and tunable absorption is essential for a variety of applications, such as designing controlled-emissivity surfaces for thermophotovoltaic devices, tailoring an infrared spectrum for controlled thermal dissipation and producing detector elements for imaging. Metamaterials based on metallic elements are particularly efficient as absorbing media, because both the electrical and the magnetic properties of a metamaterial can be tuned by structured design. So far, metamaterial absorbers in the infrared or visible range have been fabricated using lithographically patterned metallic structures, making them inherently difficult to produce over large areas and hence reducing their applicability. Here we demonstrate a simple method to create a metamaterial absorber by randomly adsorbing chemically synthesized silver nanocubes onto a nanoscale-thick polymer spacer layer on a gold film, making no effort to control the spatial arrangement of the cubes on the film. We show that the film-coupled nanocubes provide a reflectance spectrum that can be tailored by varying the geometry (the size of the cubes and/or the thickness of the spacer). Each nanocube is the optical analogue of a grounded patch antenna, with a nearly identical local field structure that is modified by the plasmonic response of the metal’s dielectric function, and with an anomalously large absorption efficiency that can be partly attributed to an interferometric effect. The absorptivity of large surface areas can be controlled using this method, at scales out of reach of lithographic approaches (such as electron-beam lithography) that are otherwise required to manipulate matter on the nanoscale.

Distance-Dependent Plasmon Resonant Coupling between a Gold Nanoparticle and Gold Film

We present an experimental analysis of the plasmonic scattering properties of gold nanoparticles controllably placed nanometers away from a gold metal film. We show that the spectral response of this system results from the interplay between the localized plasmon resonance of the nanoparticle and the surface plasmon polaritons of the gold film, as previously predicted by theoretical studies. In addition, we report that the metal film induces a polarization to the single nanoparticle light scattering, resulting in a doughnut-shaped point spread function when imaged in the far-field. Both the spectral response and the polarization effects are highly sensitive to the nanoparticle-film separation distance. Such a system shows promise in potential biometrology and diagnostic devices.

Gradient index metamaterials

Metamaterials--artificially structured materials with tailored electromagnetic response--can be designed to have properties difficult or impossible to achieve with traditional materials fabrication methods. Here we present a structured metamaterial, based on conducting split ring resonators (SRRs), which has an effective index of refraction with a constant spatial gradient. We experimentally confirm the gradient by measuring the deflection of a microwave beam by a planar slab of the composite metamaterial over a range of microwave frequencies. The gradient index metamaterial may prove an advantageous alternative approach to the development of gradient index lenses and similar optics, especially at higher frequencies. In particular, the gradient index metamaterial we propose may be suited for terahertz applications, where the magnetic resonant response of SRRs has recently been demonstrated.

Leveraging Nanoscale Plasmonic Modes to Achieve Reproducible Enhancement of Light

The strongly enhanced and localized optical fields that occur within the gaps between metallic nanostructures can be leveraged for a wide range of functionality in nanophotonic and optical metamaterial applications. Here, we introduce a means of precise control over these nanoscale gaps through the application of a molecular spacer layer that is self-assembled onto a gold film, upon which gold nanoparticles (NPs) are deposited electrostatically. Simulations using a three-dimensional finite element model and measurements from single NPs confirm that the gaps formed by this process, between the NP and the gold film, are highly reproducible transducers of surface-enhanced resonant Raman scattering. With a spacer layer of roughly 1.6 nm, all NPs exhibit a strong Raman signal that decays rapidly as the spacer layer is increased.

Modulating and tuning the response of metamaterials at the unit cell level

We perform a series of simulations and experiments at microwave frequencies where we dynamically alter the magnetic resonance of one individual split ring resonator by photodoping a piece of low-doped semiconductor positioned within the gap of the resonator. We predict and experimentally achieve a complete suppression of the resonance amplitude using an 815 nm laser source and then briefly consider the problem of tuning the frequency of an SRR by the same method. We also illustrate the metamaterial approach to active electromagnetic devices by implementing a simple yet efficient optical modulator and a three channel dynamical filter.

Plasmonic waveguide modes of film-coupled metallic nanocubes.

A metallic nanoparticle positioned over a metal film offers great advantages as a highly controllable system relevant for probing field-enhancement and other plasmonic effects. Because the size and shape of the gap between the nanoparticle and film can be controlled to subnanometer precision using relatively simple, bottom-up fabrication approaches, the film-coupled nanoparticle geometry has recently been applied to enhancing optical fields, accessing the quantum regime of plasmonics, and the design of surfaces with controlled reflectance. In the present work, we examine the plasmon modes associated with a silver nanocube positioned above a silver or gold film, separated by an organic, dielectric spacer layer. The film-coupled nanocube is of particular interest due to the formation of waveguide cavity-like modes between the nanocube and film. These modes impart distinctive scattering characteristics to the system that can be used in the creation of controlled reflectance surfaces and other applications. We perform both experimental spectroscopy and numerical simulations of individual nanocubes positioned over a metal film, finding excellent agreement between experiment and simulation. The waveguide mode description serves as a starting point to explain the optical properties observed.