Jae-Sung Kwon

Expression of interleukin-17 is correlated with interferon-α expression in cutaneous lesions of lupus erythematosus.

Background.  Type I interferon (IFN) has been reported to have an important role in the development of cutaneous lupus erythematosus (CLE) and systemic lupus erythematosus (SLE). A new subset of CD4+ T cells, T helper (Th)17 cells, also plays a role in the development of autoimmunity.

Tailoring of antibacterial Ag nanostructures on TiO2 nanotube layers by magnetron sputtering

To reduce the incidence of postsurgical bacterial infection that may cause implantation failure at the implant-bone interface, surface treatment of titanium implants with antibiotic materials such as silver (Ag) has been proposed. The purpose of this work was to create TiO2 nanotubes using plasma electrolytic oxidation (PEO), followed by formation of an antibacterial Ag nanostructure coating on the TiO2 nanotube layer using a magnetron sputtering system. PEO was performed on commercially pure Ti sheets. The Ag nanostructure was added onto the resulting TiO2 nanotube using magnetron sputtering at varying deposition rates. Field emission scanning electron microscopy and transmission electron microscopy were used to characterize the surface, and Ag content on the TiO2 nanotube layer was analyzed by X-ray diffraction and X-ray photoelectron spectroscopy. Scanning probe microscopy for surface roughness and contact angle measurement were used to indirectly confirm enhanced TiO2 nanotube hydrophilicity. Antibacterial activity of Ag ions in solution was determined by inductively coupled plasma mass spectrometry and antibacterial testing against Staphylococcus aureus (S. aureus). In vitro, TiO2 nanotubes coated with sputtered Ag resulted in significantly reduced S. aureus. Cell viability assays showed no toxicity for the lowest sputtering time group in the osteoblastic cell line MC3T3-E1. These results suggest that a multinanostructured layer with a biocompatible TiO2 nanotube and antimicrobial Ag coating is a promising biomaterial that can be tailored with magnetron sputtering for optimal performance.

Bioactivity and mechanical properties of collagen composite membranes reinforced by chitosan and β-tricalcium phosphate†

In this study, we analyzed the effects of varying concentrations of chitosan (CS) and β-tricalcium phosphate [β-TCP, Ca(3)(PO(4))(2)] on the mechanical and cell-adhesion properties of a collagen (CG) matrix for use in guided bone regeneration (GBR). Three different CS concentrations (0.5, 1, and 2%) and five different contents of β-TCP (0, 17, 29, 38, and 44%) were investigated. The composite membranes were analyzed by scanning electron microscopy and cell-adhesion, flexural-strength, and tear-strength assays. The results show that the cell-adhesion and mechanical properties of the composite membranes improved with increasing β-TCP and CS contents, yielding suitable levels of the adhesion of cells and adequate mechanical stability to ensure successful GBR. The CS adhered to the microsized β-TCP, which was distributed uniformly in the composite membranes. The β-TCP and CS have no negative effect on the cell morphology, viability, and proliferation and possess good biocompatibility. This study demonstrates that β-TCP/CS/CG composite membranes are good candidates for GBR membranes in future applications.

Modified cytotoxicity evaluation of elastomeric impression materials while polymerizing with reduced exposure time

Abstract Objective. Cytotoxicity evaluation is an important step in biocompatibility assessment of dental impression materials. Previously, cytotoxicity evaluations were carried out on already set (‘set’) impression materials for contact time or extraction time of 24 h or longer in duration. However, clinically, dental impression materials are in contact with oral tissue while they are being set (‘polymerizing’), for no longer than 10 min. Hence, the aim of this study was to investigate the difference in results between ‘polymerizing’ and ‘set’ forms of impression materials as well as the difference in results between longer duration of contact or extraction time (12 or 24 h) and shorter duration of time (15 or 30 min). Materials and methods. Seven dental impression materials of different chemical compositions were tested. Two commonly used in vitro tests were used—test on extraction and test by direct contact. Both ‘polymerizing’ and ‘set’ forms of impression materials were used with different durations of extraction and contact (15 min, 30 min, 12 h and 24 h). Results. There were significant (p < 0.05) differences of cell viability and cell proliferation between the ‘polymerizing’ and ‘set’ impression materials. Also, significant (p < 0.05) differences were noted with variance in duration of time. Conclusion. In light of the results, it is recommended to use a ‘polymerizing’ state of dental impression material for cytotoxicity evaluation, with 15 or 30 min of contact between cell and dental impression materials and an extraction time of 15 or 30 min that is more reflective of clinical situations.

Cellular Attachment and Differentiation on Titania Nanotubes Exposed to Air- or Nitrogen-Based Non-Thermal Atmospheric Pressure Plasma

The surface topography and chemistry of titanium implants are important factors for successful osseointegration. However, chemical modification of an implant surface using currently available methods often results in the disruption of topographical features and the loss of beneficial effects during the shelf life of the implant. Therefore, the aim of this study was to apply the recently highlighted portable non-thermal atmospheric pressure plasma jet (NTAPPJ), elicited from one of two different gas sources (nitrogen and air), to TiO2 nanotube surfaces to further improve their osteogenic properties while preserving the topographical morphology. The surface treatment was performed before implantation to avoid age-related decay. The surface chemistry and morphology of the TiO2 nanotube surfaces before and after the NTAPPJ treatment were determined using a field-emission scanning electron microscope, a surface profiler, a contact angle goniometer, and an X-ray photoelectron spectroscope. The MC3T3-E1 cell viability, attachment and morphology were confirmed using calcein AM and ethidium homodimer-1 staining, and analysis of gene expression using rat mesenchymal stem cells was performed using a real-time reverse-transcription polymerase chain reaction. The results indicated that both portable nitrogen- and air-based NTAPPJ could be used on TiO2 nanotube surfaces easily and without topographical disruption. NTAPPJ resulted in a significant increase in the hydrophilicity of the surfaces as well as changes in the surface chemistry, which consequently increased the cell viability, attachment and differentiation compared with the control samples. The nitrogen-based NTAPPJ treatment group exhibited a higher osteogenic gene expression level than the air-based NTAPPJ treatment group due to the lower atomic percentage of carbon on the surface that resulted from treatment. It was concluded that NTAPPJ treatment of TiO2 nanotube surfaces results in an increase in cellular activity. Furthermore, it was demonstrated that this treatment leads to improved osseointegration in vitro.

Keyhole System: A Computer-Assisted Designed and Computer-Assisted Manufactured Maxillomandibular Complex Repositioner in Orthognathic Surgery

Currently, virtual orthognathic surgery using the CAD/CAM program and three-dimensional printing technology has provided a valuable tool supporting accurate surgical planning and precise surgery. However, despite the advancements in CAD/CAM virtual surgical planning, accurately reproducing surgical planning from a virtual surgery to the operating field is still challenging. Here, we report the Keyhole system as a method that has constantly provided us with consistent results during double-jaw surgery, especially during this age of ever increasing aesthetic demand from patients.

Positive control for cytotoxicity evaluation of dental vinyl polysiloxane impression materials using sodium lauryl sulfate

Abstract Objectives. Vinyl polysiloxane (VPS) is elastomeric dental impression material which, despite having very few reports of adverse reactions, has shown high levels of cytotoxicity that is difficult to be interpreted without referencing to the positive control material. Therefore, in this study, positive control VPS was developed using sodium lauryl sulfate (SLS) for the reference of cytotoxicity test. Materials and methods. The positive control VPS with SLS was formed with a different proportion of SLS (0, 1, 2, 4, 8 and 16 wt%) added to the base. The cytotoxicity test was then carried out using the extractions or dilutions of the extractions from each of the test samples using murine fibroblast cells (L929). Results. The final product of positive control VPS behaved similar to commercially available VPS; being initially liquid-like and then becoming rubber-like. Ion chromatography showed that the level of SLS released from the product increased as the proportion of added SLS increased, consequently resulting in an increased level of cytotoxicity. Also, the commercially available VPS was less cytotoxic than the positive control VPS with more or equal to 2 wt% of SLS. However, even the VPS with the highest SLS (16 wt%) did not cause oral mucosa irritation during the animal study. Conclusions. The positive control VPS was successfully produced using SLS, which will be useful in terms of providing references during in vitro cytotoxicity testing.

Characterization of hydroxyapatite containing a titania layer formed by anodization coupled with blasting

Abstract Objectives. The modification of dental implant surface by increasing the surface roughness or/and altering chemical composition have been attempted. Among them, hydroxyapatite (HA) coatings are typically bioactive. On the other hand, titania coatings have good corrosion resistance and biocompatibility. Therefore, the objective of this study was to fabricate HA containing a titania layer using an HA blasting and anodization method to benefit from the advantages of both, followed by surface characterization and biocompatibility. Materials and methods. HA blasting was performed followed by microarc oxidation (MAO) using various applied voltages (100, 150, 200, 250 V). For surface characterization, the microstructure of the surface, surface phase and surface roughness were observed. Bonding strength was measured using a universal testing machine and potentiodynamic corrosion testing was performed. Biocompatibility was evaluated based on bioactivity and cell proliferation test. Results. The porous titanium oxide-containing HA was formed at 150 and 200 V. These surfaces were a lower corrosion current compared to the titanium treated only with HA blasting. In addition, composite treated titanium showed a rougher surface and tighter bonding strength compared to the titanium treated only with MAO. Biocompatibility demonstrated that HA/Titania composite layer on titanium showed a rapid HA precipitation and also enhanced cell proliferation. Conclusions. These results suggested that HA containing titania layer on titanium had not only excellent physicochemical, mechanical and electrochemical properties, but also improved bioactivity and biological properties that could be applied as material for a dental implant system.

The Effects of Non-Thermal Atmospheric Pressure Plasma treated Titanium Surface on Behaviors of Oral Soft Tissue Cells

Here, we investigated the possible use of the technology known as non-thermal atmospheric pressure plasma on integration and control of cytokine release of soft tissue on titanium surface. After NTAPP was applied to titanium samples, changes of surface characteristics were measured as topographical features, contact angle, surface tension, and with X-ray photoelectron spectroscopy (XPS). Protein absorption was evaluated using a bovine serum albumin absorption assay. The attachment, viability, morphology, proliferation, and cytokine release of soft tissue on titanium were assessed. No change in topographical features was observed between control and NTAPP-treated groups. However, NTAPP treatment resulted in significant lowering of the contact angle for polar and non-polar liquids and increase of surface tension. Protein absorption was significantly enhanced on the NTAPP-treated samples. Normal soft tissue attachment was improved on the NTAPP-treated groups with good viability. Cellular morphology was improved in NTAPP-treated groups whereas cellular proliferation was not enhanced. There was a significant reduction in the amounts of cytokine release for inflamed IHOK and hTERT-hNOF on the NTAPP-treated groups; except for IL-8 for IHOKs. This study demonstrates that surface functional consequences by NTAPP exposure enhanced behavior of oral soft tissue cells without topographical change.

Effects of thermoforming on the physical and mechanical properties of thermoplastic materials for transparent orthodontic aligners

Objective The aim of this systematic multiscale analysis was to evaluate the effects of thermoforming on the physical and mechanical properties of thermoplastic materials used to fabricate transparent orthodontic aligners (TOAs). Methods Specimens were fabricated using four types of thermoplastic materials with different thicknesses under a thermal vacuum. Transparency, water absorption and solubility, surface hardness, and the results of three-point bending and tensile tests were evaluated before and after thermoforming. Data were analyzed using one-way analysis of variance and Students t-test. Results After thermoforming, the transparency of Duran and Essix A+ decreased, while the water absorption ability of all materials; the water solubility of Duran, Essix A+, and Essix ACE; and the surface hardness of Duran and Essix A+ increased. The flexure modulus for the 0.5-mm-thick Duran, Essix A+, and eCligner specimens increased, whereas that for the 0.75-/1.0-mm-thick Duran and eClginer specimens decreased. In addition, the elastic modulus increased for the 0.5-mm-thick Essix A+ specimens and decreased for the 0.75-mm-thick Duran and Essix ACE and the 1.0-mm-thick Essix ACE specimens. Conclusions Our findings suggest that the physical and mechanical properties of thermoplastic materials used for the fabrication of TOAs should be evaluated after thermoforming in order to characterize their properties for clinical application.