Jamal Lasri

Self-assembled dicopper(II) diethanolaminate cores for mild aerobic and peroxidative oxidation of alcohols†

The new dicopper(ii) complexes [Cu(2)(μ-Hmdea)(2)(NCS)(2)] (1) and [Cu(2)(μ-Hedea)(2)(N(3))(2)]·(H(2)O)(0.25) (2) with the {Cu(2)(μ-O)(2)} diethanolaminate cores have been easily generated by aqueous medium self-assembly reactions of copper(ii) nitrate with N-methyl- or N-ethyldiethanolamine (H(2)mdea or H(2)edea, respectively), in the presence of sodium thiocyanate (for 1) or sodium azide (for 2) as ancillary ligands sources. They have been isolated as air-stable crystalline solids and fully characterized by IR and UV-vis spectroscopies, ESI-MS(+), elemental and single-crystal X-ray diffraction analyses. The latter complex also features a fourfold linkage of neighbouring dimeric units via strong intermolecular O-HO hydrogen bonds, giving rise to the formation of tetracopper aggregates. The catalytic activity of compounds 1 and 2 has been studied for the mild (50-80 °C) and selective oxidations of alcohols, namely for (i) the aerobic aqueous medium oxidation of benzyl alcohols to benzaldehydes, mediated by TEMPO radical, and for (ii) the solvent-free oxidation of secondary alcohols to ketones by t-BuOOH under microwave (MW) irradiation. Complex 2 shows the highest efficiency in both oxidation systems, resulting in up to 99% molar yields (based on the alcohol substrate) of products. In addition, remarkably high values of TON (1020) and TOF (4080 h(-1)) have been achieved in the MW-assisted peroxidative oxidation of 1-phenylethanol to acetophenone (model reaction). Attractive green features of these catalytic systems include the operation in aqueous or solvent-free reaction medium, under mild conditions and with high yields and selectivities, using Cu catalyst precursors that are readily available by self-assembly in water of simple chemicals.

Alkoxy‐1,3,5‐triazapentadien(e/ato) Copper(II) Complexes: Template Formation and Applications for the Preparation of Pyrimidines and as Catalysts for Oxidation of Alcohols to Carbonyl Products

Template combination of copper acetate (Cu(AcO)(2)⋅H(2)O) with sodium dicyanamide (NaN(C≡N)(2), 2 equiv) or cyanoguanidine (N≡CNHC(=NH)NH(2), 2 equiv) and an alcohol ROH (used also as solvent) leads to the neutral copper(II)-(2,4-alkoxy-1,3,5-triazapentadienato) complexes [Cu{NH=C(OR)NC(OR)=NH}(2)] (R = Me (1), Et (2), nPr (3), iPr (4), CH(2)CH(2)OCH(3) (5)) or cationic copper(II)-(2-alkoxy-4-amino-1,3,5-triazapentadiene) complexes [Cu{NH=C(OR)NHC(NH(2))=NH}(2)](AcO)(2) (R = Me (6), Et (7), nPr (8), nBu (9), CH(2)CH(2)OCH(3) (10)), respectively. Several intermediates of this reaction were isolated and a pathway was proposed. The deprotonation of 6-10 with NaOH allows their transformation to the corresponding neutral triazapentadienates [Cu{NH=C(OR)NC(NH(2))=NH}(2)] 11-15. Reaction of 11, 12 or 15 with acetyl acetone (MeC(=O)CH(2)C(=O)Me) leads to liberation of the corresponding pyrimidines NC(Me)CHC(Me)NCNHC(=NH)OR, whereas the same treatment of the cationic complexes 6, 7 or 10 allows the corresponding metal-free triazapentadiene salts {NH(2)C(OR)=NC(NH(2))=NH(2)}(OAc) to be isolated. The alkoxy-1,3,5-triazapentadiene/ato copper(II) complexes have been applied as efficient catalysts for the TEMPO radical-mediated mild aerobic oxidation of alcohols to the corresponding aldehydes (molar yields of aldehydes of up to 100 % with >99 % selectivity) and for the solvent-free microwave-assisted synthesis of ketones from secondary alcohols with tert-butylhydroperoxide as oxidant (yields of up to 97 %, turnover numbers of up to 485 and turnover frequencies of up to 1170 h(-1)).

Single-pot template transformations of cyanopyridines on a PdII centre: syntheses of ketoimine and 2,4-dipyridyl-1,3,5-triazapentadiene palladium(II) complexes and their catalytic activity for microwave-assisted Suzuki–Miyaura and Heck reactions

[2 + 3] cycloaddition of the pyrrolin N-oxide (-)O[upper bond 1 start](+)N[double bond, length as m-dash]CHCH(2)CH(2)C[upper bond 1 end]Me(2) with 2-cyanopyridine NC(5)H(4)(2-CN) in the presence of PdCl(2) at room temperature in acetone gives the ketoimine palladium(II) complex cis-[PdCl(2){N(=[upper bond 1 start]CCH(2)CH(2)C(Me)(2)N[upper bond 1 end]H)C(=O)C(5)H(4)N}] containing the (E)-N-(5,5-dimethylpyrrolidin-2-ylidene)picolinamide ligand, in good yield (85%). The reaction of with 3-cyanopyridine NC(5)H(4)(3-CN) or 4-cyanopyridine NC(5)H(4)(4-CN) under the same experimental conditions gives the simple adducts of cyanopyridines trans-[PdCl(2){NC(5)H(4)(3-CN)}(2)] or trans-[PdCl(2){NC(5)H(4)(4-CN)}(2)] , respectively. When the cyanopyridines NC(5)H(3)R(1)R(2) (R(1) = 2-CN, R(2) = H ; R(1) = 3-CN, R(2) = H ; R(1) = 4-CN, R(2) = H ; R(1) = 4-CN, R(2) = 2-Cl ; R(1) = 3-CN, R(2) = 5-Me ) are heated at 100 degrees C for 12 h with 2-butanone oxime (used as a reagent and solvent) in the presence of PdCl(2), the 2,4-dipyridyl-1,3,5-triazapentadienate (or bis-imidoylamidinate) palladium(II) complexes [Pd{HN[double bond, length as m-dash]C(NC(5)H(3)R(2))NC(NC(5)H(3)R(2))[double bond, length as m-dash]NH}(2)] (2-NC(5)H(3), R(2) = H ; 3-NC(5)H(3), R(2) = H ; 4-NC(5)H(3), R(2) = H ; 4-NC(5)H(3), R(2) = 2-Cl ; 3-NC(5)H(3), R(2) = 5-Me ) are synthesized by one-pot template transformations followed by deprotonation by a base (n-PrNH(2)). The compounds were characterized by IR, (1)H and (13)C NMR spectroscopies, FAB(+)-MS, elemental analyses and, in the cases of , , and , also by X-ray diffraction analyses. The catalytic activity of complexes and was studied under microwave irradiation for C-C coupling reactions, in the solid phase on a silica gel support, and it was found that complex is the most active one with the maximum TON of 2.0.10(5) and TOF of 1.3.10(4) min(-1) for Suzuki-Miyaura, and TON of 800 and TOF of 27 min(-1) for Heck reactions.

PtII-Promoted [2 + 3] Cycloaddition of Azide to Cyanopyridines : Convenient Tool toward Heterometallic Structures

The [2 + 3] cycloaddition reactions (which are greatly accelerated by microwave irradiation) of the di(azido)platinum(II) compounds cis-[Pt(N(3))(2)(PPh(3))(2)] (1) with cyanopyridines NCR (2) (R = 4-, 3-, and 2-NC(5)H(4)) give the corresponding bis(pyridyltetrazolato) complexes trans-[Pt(N(4)CR)(2)(PPh(3))(2)] (3) [R = 4-NC(5)H(4) (3a), 3-NC(5)H(4) (3b), and 2-NC(5)H(4) (3c)]. Compound 3c has been characterized as the N(1)N(2)-bonded isomer in the solid state by X-ray crystallography and represents the first bis(tetrazolato) complex of this kind. Complexes 3a and 3b have been used as metallaligands to generate heteronuclear coordination polymers in the presence of copper nitrate. A one-dimensional supramolecular architecture was obtained as the exclusive product, {trans-[Pt(2)(N(4)CR)(4)(PPh(3))(4)Cu](n)(NO(3))(2n).nH(2)O (4.nH(2)O) (R = 4-NC(5)H(4)), when 3a was employed, whereas with 3b the heteronuclear square complex trans-[Pt(N(4)CR)(2)(PPh(3))(2)Cu(NO(3))(2)(H(2)O)](2) (5) (R = 3-NC(5)H(4)), composed of Pt/Cu ions, was obtained. All the isolated complexes were characterized by IR, elemental, and (for 3b, 3c, 4, and 5) X-ray structural analyses. Complexes 3 were additionally characterized by (1)H, (13)C, and (31)P {(1)H} NMR spectroscopies.

PtII-Mediated Imine–Nitrile Coupling Leading to Symmetrical (1,3,5,7,9-Pentaazanona-1,3,6,8-tetraenato)Pt(II) Complexes Containing the Incorporated 1,3-Diiminoisoindoline Moiety

Treatment of trans-[PtCl(2)(NCR)(2)] (1; R = Et (1a), Ph (1b)) with 1,3-diiminoisoindoline (2) gives access to the corresponding symmetrical (1,3,5,7,9-pentaazanona-1,3,6,8-tetraenato)Pt(II) complexes [PtCl{NH═C(R)N═C(C(6)H(4))NC═NC(R)═NH}] (3). The reactions of 1 with one equivalent of 1,1,3,3-tetramethylguanidine (4), 1,3-diphenylguanidine (6), or acetone oxime (8) leads to the formation of mixed asymmetrical Pt(II) complexes trans-[PtCl(2){NH═C(R)N═C(NMe(2))(2)}(NCR)] (5), [PtCl{NH═C(R)NC(NHPh)═NPh}(NCR)] (7), or trans-[PtCl(2){NH═C(Ph)ON═CMe(2)}(NCPh)] (9), respectively, as a result of nucleophilic addition to one of the nitrile ligands in 1. Treatment of 5, 7, and 9 with one equivalent of 2 leads to complexes 3. The complexes were characterized by IR, (1)H, (13)C{(1)H}, and (195)Pt NMR (for 3) spectroscopies, ESI(+)-MS, elemental analyses, and X-ray diffraction (for 3). Complex 3a has an asymmetric unit with five independent Pt molecules of the same chemical composition and two molecules of water, resulting in a total of 40 molecules of the complex and sixteen guest water molecules per unit cell. Theoretical calculations revealed that the most plausible mechanism of formation of complexes 3 includes stepwise nucleophilic addition of 2 to one of the nitrile ligands in 1, a first cyclization upon formation of the Pt-N bond and elimination of HCl, and a second nucleophilic addition/cyclization.

Mixed unsymmetric oxadiazoline and/or imine platinum(II) complexes

Iminoacylation of acetone oxime Me(2)C[double bond, length as m-dash]NOH upon reaction with trans-[PtCl(2)(NCCH(2)CO(2)Me)(2)] and [2 + 3] cycloaddition of acyclic nitrone (-)O(+)N(Me) = C(H)(C(6)H(4)Me-4) to a nitrile ligand in lead to the formation of mono-imine trans-[PtCl(2)(imine-a)(NCCH(2)CO(2)Me)] [imine-a = NH[double bond, length as m-dash]C(CH(2)CO(2)Me)ON = CMe(2)] and mono-oxadiazoline trans-[PtCl(2)(oxadiazoline-a)(NCCH(2)CO(2)Me)] [oxadiazoline-a = [upper bond 1 start]N[double bond, length as m-dash]C(CH(2)CO(2)Me)ON(Me)C[upper bond 1 end](H)(C(6)H(4)Me-4)] unsymmetric mixed ligand complexes, respectively, as the main products. Reactions of or with acetone oxime , cyclic nitrone (-)O(+)N = CHCH(2)CH(2)C[upper bond 1 end]Me(2) or N,N-diethylhydroxylamine give access, in moderate to good yields, to the unsymmetric mixed ligand oxadiazoline and/or imine complexes trans-[PtCl(2)(oxadiazoline-a)(imine-a)] , trans-[PtCl(2)(oxadiazoline-a)(oxadiazoline-b)] [oxadiazoline-b = [upper bond 1 start]N[double bond, length as m-dash]C(CH(2)CO(2)Me)O[lower bond 1 start]NC[upper bond 1 end](H)CH(2)CH(2)C[lower bond 1 end]Me(2)], trans-[PtCl(2)(imine-a)(imine-b)] [imine-b = NH = C(CH(2)CO(2)Me)ONEt(2)] or trans-[PtCl(2)(imine-a)(oxadiazoline-b)] . The cis mono-imine mixed ligand complex cis-[PtCl(2)(imine-a)(NCCH(2)CO(2)Me)] is the major product from the reaction of cis-[PtCl(2)(NCCH(2)CO(2)Me)(2)] with the oxime , while the di-imine compound cis-[PtCl(2)(imine-a)(2)] is a minor product. Reaction of cis-[PtCl(2)(imine-a)(NCCH(2)CO(2)Me)] with N,N-diethylhydroxylamine or the cyclic nitrone affords, in good yields, the unsymmetric mixed ligand complexes cis-[PtCl(2)(imine-a)(imine-b)] or cis-[PtCl(2)(imine-a)(oxadiazoline-b)] , respectively. All these complexes were characterized by elemental analyses, IR and (1)H, (13)C and (195)Pt NMR spectroscopies, and FAB(+)-MS. The X-ray structural analysis of trans-[PtCl(2){NH=C(CH(2)CO(2)Me)ON=CMe(2)}(NCCH(2)CO(2)Me)] is also reported.

Direct synthesis of (imine)platinum(II) complexes by iminoacylation of ketoximes with activated organonitrile ligands

The metal-mediated iminoacylation of ketoximes R1R2C=NOH (1a R1 = R2 = Me; 1b R1 = Me, R2 = Et; 1c R1R2 = C4H8; 1d R1R2 = C5H10) upon treatment with the platinum(II) complex trans-[PtCl2(NCCH2CO2Me)2] 2a with an organonitrile bearing an acceptor group proceeds under mild conditions in dry CH2Cl2 to give the trans-[PtCl2{NH=C(CH2CO2Me)ON=CR1R2}2] 3a-d isomers in moderate yield. The reaction of those ketoximes with trans-[PtCl2(NCCH2Cl)2] 2b under the same experimental conditions gives a 1 : 1 mixture of the isomers trans/cis-[PtCl2{NH=C(CH2Cl)ON=CR1R2}2] 3e-h and 4e-h in moderate to good yield. These reactions are greatly accelerated by microwave irradiation to give, with higher yields (ca. 75%), the same products which were characterized by IR and 1H, 13C and 195Pt NMR spectroscopies, FAB-MS, elemental analysis for the stable trans isomers, and X-ray diffraction analysis (3f). The diiminoester ligand in 3a was liberated upon reaction of the complex with a diphosphine.