Jean-Laurent Dournaux

Overview of the GYES instrument: a multifibre high-resolution spectrograph for the prime focus of the Canada-France-Hawaii Telescope

ESAs cornerstone mission Gaia will construct a billion-star catalogue down to magnitude 20 but will only provide detailed chemical information for the brighter stars and will be lacking radial velocity at the faint end due to insufficient Signal-to-Noise Ratios (SNR). This calls for the deployment of a ground spectrograph under time scales coherent with those of Gaia for a complementary survey. The GYES instrument is a high resolution (~ 20,000) spectrometer proposed for installation on the Canada- France-Hawaii Telescope (CFHT) to perform this survey in the northern hemisphere. It exploits the large Field of View (FoV) available at the prime focus together with a high multiplex (~ 500 fibres) to achieve a SNR of 30 in two hours at magnitude 16 and render the survey possible on the order of 300 nights. The on-going feasibility study aims at jointly optimising all components of the system: the field corrector, the positioner, the fibres and the spectrograph. The key challenges consist in accommodating the components in the highly constrained environment of the primary focus, as well as in achieving maximum efficiency thanks to high transmission and minimum reconfiguration delays. Meanwhile, for GYES to have its first light at the time of Gaias initial data release (2014-2015), it is mandatory to keep its complexity down by designing a predominantly passive instrument.

Modeling of a large deformable mirror for future E-ELT

Increasing dimensions of ground based telescopes while implementing Adaptive Optics systems to cancel both structural deformations and atmospheric effects require very large diameters deformable mirrors (DM) and a high number of actuators with large strokes. This has led for the future E-ELT to a 2.5 m diameter DM getting about 8000 actuators. This paper presents a local and a global model of the DM in order to both study its influence function and its dynamical behavior. In the first part, influence function of the mirror is calculated. Results obtained by an analytical way are compared to those obtained numerically. In the second part, modal analysis of the mirror is presented. Results are limited to the first modes. Modal analysis is also only made for the base plate to derive the specific influence of DMs components on the global dynamic behavior. In the last part, optimization methods are used to help designing a 1 m prototype of the DM.

Inauguration and First Light of the GCT-M Prototype for the Cherenkov Telescope Array

The Gamma-ray Cherenkov Telescope (GCT) is a candidate for the Small Size Telescopes (SSTs) of the Cherenkov Telescope Array (CTA). Its purpose is to extend the sensitivity of CTA to gamma-ray energies reaching 300 TeV. Its dual-mirror optical design and curved focal plane enables the use of a compact camera of 0.4 m diameter, while achieving a field of view of above 8 degrees. Through the use of the digitising TARGET ASICs, the Cherenkov flash is sampled once per nanosecond contin-uously and then digitised when triggering conditions are met within the analogue outputs of the photosensors. Entire waveforms (typically covering 96 ns) for all 2048 pixels are then stored for analysis, allowing for a broad spectrum of investigations to be performed on the data. Two prototypes of the GCT camera are under development, with differing photosensors: Multi-Anode Photomultipliers (MAPMs) and Silicon Photomultipliers (SiPMs). During November 2015, the GCT MAPM (GCT-M) prototype camera was integrated onto the GCT stru...

SST-GATE: an innovative telescope for very high energy astronomy

The Cherenkov Telescope Array (CTA) is an international collaboration that aims to create the worlds largest (ever) Very High Energy gamma-ray telescope array, consisting of more than 100 telescopes covering an area of several square kilometers to observe the electromagnetic showers generated by incoming cosmic gamma-rays with very high energies (from a few tens of GeV up to over 100 TeV). Observing such sources requires - amongst many other things - a large FoV (Field of View). In the framework of CTA, SST-GATE (Small Size Telescope - GAmma-ray Telescope Elements) aims to investigate and to build one of the two first CTA prototypes based on the Schwarzschild-Couder (SC) optical design that delivers a FoV close to 10 degrees in diameter. To achieve the required performance per unit cost, many improvements in mirror manufacturing and in other technologies are required. We present in this paper the current status of our project. After a brief introduction of the very high energy context, we present the opto-mechanical design, discuss the technological tradeoffs and explain the electronics philosophy that will ensure the telescopes cost is minimised without limiting its capabilities. We then describe the software nedeed to operate the telescope and conclude by presenting the expected telescope performance and some management considerations.

The Gamma-ray Cherenkov Telescope for the Cherenkov Telescope Array

The Cherenkov Telescope Array (CTA) is a forthcoming ground-based observatory for very-high-energy gamma rays. CTA will consist of two arrays of imaging atmospheric Cherenkov telescopes in the Northern and Southern hemispheres, and will combine telescopes of different types to achieve unprecedented performance and energy coverage. The Gamma-ray Cherenkov Telescope (GCT) is one of the small-sized telescopes proposed for CTA to explore the energy range from a few TeV to hundreds of TeV with a field of view ≳ 8° and angular resolution of a few arcminutes. The GCT design features dual-mirror Schwarzschild-Couder optics and a compact camera based on densely-pixelated photodetectors as well as custom electronics. In this contribution we provide an overview of the GCT project with focus on prototype development and testing that is currently ongoing. We present results obtained during the first on-telescope campaign in late 2015 at the Observatoire de Paris-Meudon, during which we recorded the first Cherenkov ima...

Mechanical design of SST-GATE, a dual-mirror telescope for the Cherenkov Telescope Array

The Cherenkov Telescope Array (CTA) project aims to create the next generation Very High Energy (VHE) gamma-ray telescope array. It will be devoted to the observation of gamma rays over a wide band of energy, from a few tens of GeV to more than 100 TeV. Two sites are foreseen to view the whole sky where about 100 telescopes, composed of three different classes, related to the specific energy region to be investigated, will be installed. Among these, the Small Size class of Telescopes, SSTs, are devoted to the highest energy region, to beyond 100 TeV. Due to the large number of SSTs, their unit cost is an important parameter. At the Observatoire de Paris, we have designed a prototype of a Small Size Telescope named SST-GATE, based on the dual-mirror Schwarzschild-Couder optical formula, which has never before been implemented in the design of a telescope. Over the last two years, we developed a mechanical design for SST-GATE from the optical and preliminary mechanical designs made by the University of Durham. The integration of this telescope is currently in progress. Since the early stages of mechanical design of SST-GATE, finite element method has been used employing shape and topology optimization techniques to help design several elements of the telescope. This allowed optimization of the mechanical stiffness/mass ratio, leading to a lightweight and less expensive mechanical structure. These techniques and the resulting mechanical design are detailed in this paper. We will also describe the finite element analyses carried out to calculate the mechanical deformations and the stresses in the structure under observing and survival conditions.

Influence of the Mixing Conditions on the Rheological Behavior of a Biscuit Dough

Biscuits are obtained after rolling, cutting and cooking of a dough preliminary prepared by kneading (Wade, 1995). It has been shown by Contamine et al. (1995) that the viscoelastic properties of the dough are partially responsible for the final quality of the biscuits. Thus, the purpose of the present work is to determine the influence of mixing conditions on the rheological properties of a biscuit dough.

Towards final characterisation and performance of the GCT prototype telescope structure for the Cherenkov Telescope Array

The Gamma-ray Cherenkov Telescope (GCT) is an innovative dual-mirror solution proposed for the Small Size Telescopes of the future Cherenkov Telescope Array (CTA), capable of imaging the showers induced by cosmic gamma-rays with energies from a few TeV up to 300 TeV. The Schwarzschild Couder design on which the telescope optical design is based makes possible the construction of a fast telescope (primary mirror diameter 4 m, focal length 2.3 m) with a plate scale well matched to compact photosensors, such as multi anode or silicon photomultipliers (MAPMs and SiPMs, respectively) for the camera. The prototype GCT on Meudons site of the Observatoire de Paris saw first Cherenkov light from air showers in November 2015, using an MAPM based camera. In this contribution, we firstly report on the prototype GCT telescopes performance during its assessment phase. Secondly, we present the telescope configuration during a campaign of observations held in spring 2017. Finally, we describe studies of the telescope structure, such as the pointing and tracking performance.

Aspherical mirrors for the Gamma-ray Cherenkov Telescope, a Schwarschild-Couder prototype proposed for the future Cherenkov Telescope Array

The Cherenkov Telescope Array (CTA) project, led by an international collaboration of institutes, aims to create the worlds largest next generation Very High-Energy (VHE) gamma-ray telescope array, devoted to observations in a wide band of energy, from a few tens of GeV to more than 100 TeV. The Small-Sized Telescopes (SSTs) are dedicated to the highest energy range. Seventy SSTs are planned in the baseline array design with a required lifetime of about 30 years. The GCT (Gamma-ray Cherenkov Telescope) is one of the prototypes proposed for CTAs SST sub-array. It is based on a Schwarzschild-Couder dual-mirror optical design. This configuration has the benefit of increasing the field-of-view and decreasing the masses of the telescope and of the camera. But, in spite of these many advantages, it was never implemented before in ground-based Cherenkov astronomy because of the aspherical and highly curved shape required for the mirrors. The optical design of the GCT consists of a primary 4 meter diameter mirror, segmented in six aspherical petals, a secondary monolithic 2-meter mirror and a light camera. The reduced number of segments simplifies the alignment of the telescope but complicates the shape of the petals. This, combined with the strong curvature of the secondary mirror, strongly constrains the manufacturing process. The Observatoire de Paris implemented metallic lightweight mirrors for the primary and the secondary mirrors of GCT. This choice was made possible because of the relaxed requirements of optical Cherenkov telescopes compared to optical ones. Measurements on produced mirrors show that these ones can fulfill requirements in shape, PSF and reflectivity, with a clear competition between manufacturing cost and final performance. This paper describes the design of these mirrors in the context of their characteristics and how design optimization was used to produce a lightweight design. The manufacturing process used for the prototype and planned for the large scale production is presented as well as the performance, in terms of geometric and optical properties, of the produced mirrors. The alignment procedure of the mirrors is also detailed. This technique is finally compared to other manufacturing techniques based on composite glass mirrors within the framework of GCT mirrors specificities.

Seismic analysis of the 4-meter telescope SST-GATE for the Cherenkov Telescope Array

The Cherenkov Telescope Array (CTA) project aims to create a next generation Very High Energy (VHE)γ-ray telescope array, devoted to the observation in a wide band of energy, from a few tens of GeV to more than 100 TeV. Two sites are foreseen to view the whole sky, with the main one in the Southern Hemisphere where about 100 telescopes of three different classes, related to the specific energy region to be investigated, will be installed. Among these, the Small Size class of Telescopes, SSTs, are 4-meter telescopes and are devoted to the highest energy region, from 1 TeV to beyond 100 TeV. Some of these sites considered for CTA exhibit strong seismic constraints. At the Observatoire de Paris, we have designed a prototype of a Small Size Telescope named SST-GATE, based on the dual-mirror Schwarzschild-Couder optical formula, which was never before implemented in the design of a Cherenkov telescope. The integration of this telescope on the site of the Observatoire de Paris is currently in progress. Technical solutions exist in the literature to protect structures from dynamic loads caused by earthquakes without increasing the mass and cost of the structure. This paper presents a state of the art of these techniques by keeping in mind that the operational performance of the telescope should not be compromised. The preliminary seismic analysis of SSTGATE performed by the finite element method is described before.