Jiachuan Lin

Linearly polarized vector modes: enabling MIMO-free mode-division multiplexing

We experimentally investigate mode-division multiplexing in an elliptical ring core fiber (ERCF) that supports linearly polarized vector modes (LPV). Characterization show that the ERCF exhibits good polarization maintaining properties over eight LPV modes with effective index difference larger than 1 × 10-4. The ERCF further displays stable mode power and polarization extinction ratio when subjected to external perturbations. Crosstalk between the LPV modes, after propagating through 0.9 km ERCF, is below -14 dB. By using six LPV modes as independent data channels, we achieved the transmission of 32 Gbaud QPSK over 0.9 km ERCF without any multiple-input-multiple-output (MIMO) or polarization-division multiplexing (PDM) signal processing.

The Impact of Modal Interactions on Receiver Complexity in OAM Fibers

We experimentally study the modal interactions in mode division multiplexing (MDM) links supporting orbital angular momentum (OAM) modes of order zero and one. We use time of flight and channel impulse response measurements to characterize our OAM-MDM link and quantify modal impairments. We examine two OAM fibers with different index profiles and differential mode group delays (DMGD) between supported vector modes. Data transmission experiments probe the impact of modal impairments on digital signal processing complexity and achievable bit error rate for OAM-MDM link. We discuss in particular memory depth requirements for equalizers in separate mode detection schemes, and how memory depth varies with DMGD metrics as well as crosstalk level.

Flexible on-chip frequency comb generation using a SOI dual-drive MZM

We demonstrate comb generation on 220-nm silicon-on-insulator, enabled by a dual-drive Mach-Zehnder modulator, by which 7 comb lines with 7dB flatness and 5 lines with 3dB flatness have been achieved. This provides a promising solution for flexible multicarrier transmitters on silicon.

Demonstration and evaluation of an optimized RFS comb for terabit flexible optical networks

We experimentally demonstrate and evaluate an optimization strategy of a recirculating frequency shifting (RFS) optical comb for terabit flexible optical networks. We achieve an increased optical signal-to-noise ratio (OSNR) with good stability (no system outage) by reducing erbium-doped-fiber amplifier gain in the shifting loop and deploying an in-loop noise suppression filter. We demonstrate that this source can support 20 × 200 Gb/s dual polarization Nyquist-16QAM transmission. With optimization, the RFS comb has greater and more uniform OSNR per channel. Flexible optical networks with software-defined networking are particularly suited to this enhanced RFS due to 1) programmable frequency spacing, 2) dense, stable spacing enabling very high spectral efficiency, 3) uniform performance across channels, and 4) sufficient OSNR for high-order modulation. The RFS can be used in short links when using low overhead forward error correction (FEC). Distances as great as 1150 km are achieved when using a 20% FEC overhead. Long-distance tests at 4 Tb/s result in a post-FEC net rate of 3.3 Tb/s and 6.3 bit/s/Hz of spectral efficiency.