Jiuk Jang

Stretchable, Transparent Electrodes as Wearable Heaters Using Nanotrough Networks of Metallic Glasses with Superior Mechanical Properties and Thermal Stability

Mechanical robustness, electrical and chemical reliabilities of devices against large deformations such as bending and stretching have become the key metrics for rapidly emerging wearable electronics. Metallic glasses (MGs) have high elastic limit, electrical conductivity, and corrosion resistance, which can be promising for applications in wearable electronics. However, their applications in wearable electronics or transparent electrodes have not been extensively explored so far. Here, we demonstrate stretchable and transparent electrodes using CuZr MGs in the form of nanotrough networks. MG nanotroughs are prepared by electrospinning and cosputtering process, and they can be transferred to various desired substrates, including stretchable elastomeric substrates. The resulting MG nanotrough network is first utilized as a stretchable transparent electrode, presenting outstanding optoelectronic (sheet resistance of 3.8 Ω/sq at transmittance of 90%) and mechanical robustness (resistance change less than 30% up to a tensile strain of 70%) as well as excellent chemical stability against hot and humid environments (negligible degradation in performance for 240 h in 85% relative humidity and 85 °C). A stretchable and transparent heater based on the MG nanotrough network is also demonstrated with a wide operating temperature range (up to 180 °C) and excellent stretchability (up to 70% in the strain). The excellent mechanical robustness of these stretchable transparent electrode and heater is ascribed to the structural configuration (i.e., a nanotrough network) and inherent high elastic limit of MGs, as supported by experimental results and numerical analysis. We demonstrate their real-time operations on human skin as a wearable, transparent thermotherapy patch controlled wirelessly using a smartphone as well as a transparent defroster for an automobile side-view mirror, suggesting a promising strategy toward next-generation wearable electronics or automobile applications.

High Dielectric Performances of Flexible and Transparent Cellulose Hybrid Films Controlled by Multidimensional Metal Nanostructures

Various wearable electronic devices have been developed for extensive outdoor activities. The key metrics for these wearable devices are high touch sensitivity and good mechanical and thermal stability of the flexible touchscreen panels (TSPs). Their dielectric constants (k) are important for high touch sensitivities. Thus, studies on flexible and transparent cover layers that have high k with outstanding mechanical and thermal reliabilities are essential. Herein, an unconventional approach for forming flexible and transparent cellulose nanofiber (CNF) films is reported. These films are used to embed ultralong metal nanofibers that serve as nanofillers to increase k significantly (above 9.2 with high transmittance of 90%). Also, by controlling the dimensions and aspect ratios of these fillers, the effects of their nanostructures and contents on the optical and dielectric properties of the films have been studied. The length of the nanofibers can be controlled using a stretching method to break the highly aligned, ultralong nanofibers. These nanofiber-embedded, high-k films are mechanically and thermally stable, and they have better Youngs modulus and tensile strength with lower thermal expansion than commercial transparent plastics. The demonstration of highly sensitive TSPs using high-k CNF film for smartphones suggests that this film has significant potential for next-generation, portable electronic devices.

Smart Sensor Systems for Wearable Electronic Devices

Wearable human interaction devices are technologies with various applications for improving human comfort, convenience and security and for monitoring health conditions. Healthcare monitoring includes caring for the welfare of every person, which includes early diagnosis of diseases, real-time monitoring of the effects of treatment, therapy, and the general monitoring of the conditions of people’s health. As a result, wearable electronic devices are receiving greater attention because of their facile interaction with the human body, such as monitoring heart rate, wrist pulse, motion, blood pressure, intraocular pressure, and other health-related conditions. In this paper, various smart sensors and wireless systems are reviewed, the current state of research related to such systems is reported, and their detection mechanisms are compared. Our focus was limited to wearable and attachable sensors. Section 1 presents the various smart sensors. In Section 2, we describe multiplexed sensors that can monitor several physiological signals simultaneously. Section 3 provides a discussion about short-range wireless systems including bluetooth, near field communication (NFC), and resonance antenna systems for wearable electronic devices.

Soft, smart contact lenses with integrations of wireless circuits, glucose sensors, and displays

This study presents a soft, smart contact lens that provides real-time sensing for diabetes through a wireless display. Recent advances in wearable electronics combined with wireless communications are essential to the realization of medical applications through health monitoring technologies. For example, a smart contact lens, which is capable of monitoring the physiological information of the eye and tear fluid, could provide real-time, noninvasive medical diagnostics. However, previous reports concerning the smart contact lens have indicated that opaque and brittle components have been used to enable the operation of the electronic device, and this could block the user’s vision and potentially damage the eye. In addition, the use of expensive and bulky equipment to measure signals from the contact lens sensors could interfere with the user’s external activities. Thus, we report an unconventional approach for the fabrication of a soft, smart contact lens in which glucose sensors, wireless power transfer circuits, and display pixels to visualize sensing signals in real time are fully integrated using transparent and stretchable nanostructures. The integration of this display into the smart lens eliminates the need for additional, bulky measurement equipment. This soft, smart contact lens can be transparent, providing a clear view by matching the refractive indices of its locally patterned areas. The resulting soft, smart contact lens provides real-time, wireless operation, and there are in vivo tests to monitor the glucose concentration in tears (suitable for determining the fasting glucose level in the tears of diabetic patients) and, simultaneously, to provide sensing results through the contact lens display.

Nanomaterial-based stretchable and transparent electrodes

ABSTRACT The recent advent of unprecedented wearable applications engendered the need for stretchable electronics, which can be realized by making the individual components stretchable. The transparent conducting electrode is one of the most important components of optoelectronic devices. Therefore, developing transparent electrodes in a stretchable form is essential for the implementation of stretchable electronics. In this paper, the recent efforts in the development of stretchable and transparent electrodes, particularly those using nanomaterials such as metal nanowires, metal nanofibers, and carbon nanotubes are introduced.

Multi-dimensional carbon nanofibers for supercapacitor electrodes

Four different types of porous carbon nanofibers (CNFs), plain, hollow, multi-channel (MC), and hollowed MC, were fabricated using coaxial electrospinning and thermal treatment for supercapacitor electrodes. The influence of the porosity on the specific surface area (SSA), pore volumes, and electrochemical propoerties of porous CNFs were investigated. The comparisons of their properties are a valuable work with same methods, becuase electrochemical performances are depending on the measurement conditions. Among them, the hollowed MC CNF structure was indicated the highest SSA and pore volumes. In addition, their hybrid structures with multi-walled carbon nanotubes (MWCNTs) were analyzed in therms of their porosity, SSA, and electrochemical properties for supercapacitors (specific capacitance and long-term cycling). These hybrid structures can improve overall porosity and electrochemical propoerties due to the extra mesoporous structures formed by entangling MWCNTs. In conclusion, these porous CNFs have a promising potential for various fields which need high porosity and SSA, and can be used as the platforms for catalysts, sensors, or energy devices.