Jiyang Zhang

Phosphoproteome analysis of the human Chang liver cells using SCX and a complementary mass spectrometric strategy

The liver is the largest organ in the body, with many complex, essential functions, such as metabolism, deintoxication, and secretion, often regulated via post‐translational modifications, especially phosphorylation. Thus, the detection of phosphoproteins and phosphorylation sites is important to comprehensively explore human liver biological function. The human Chang liver cell line is among the first derived from non‐malignant tissue, and its phosphoproteome profile has never been globally analyzed. To develop the complete phosphoproteome and probe the roles of protein phosphorylation in normal human liver, we adopted a shotgun strategy based on strong cation exchange chromatograph, titanium dioxide and LC‐MS/MS to isolate and identify phosphorylated proteins. Two types of MS approach, Q‐TOF and IT, were used and compared to identify phosphosites from complex protein mixtures of these cells. A total of 1035 phosphorylation sites and 686 phosphorylated peptides were identified from 607 phosphoproteins. A search using the public database of PhosphoSite showed that approximately 344 phosphoproteins and 760 phosphorylation sites appeared to be novel. In addition, N‐terminal phosphorylated peptides were a greater fraction of all identified phosphopeptides. With GOfact analysis, we found that most of the identified phosphoproteins are involved in regulating metabolism, consistent with the livers role as a key metabolic organ.

Brain-specific Proteins Decline in the Cerebrospinal Fluid of Humans with Huntington Disease

We integrated five sets of proteomics data profiling the constituents of cerebrospinal fluid (CSF) derived from Huntington disease (HD)-affected and -unaffected individuals with genomics data profiling various human and mouse tissues, including the human HD brain. Based on an integrated analysis, we found that brain-specific proteins are 1.8 times more likely to be observed in CSF than in plasma, that brain-specific proteins tend to decrease in HD CSF compared with unaffected CSF, and that 81% of brain-specific proteins have quantitative changes concordant with transcriptional changes identified in different regions of HD brain. The proteins found to increase in HD CSF tend to be liver-associated. These protein changes are consistent with neurodegeneration, microgliosis, and astrocytosis known to occur in HD. We also discuss concordance between laboratories and find that ratios of individual proteins can vary greatly, but the overall trends with respect to brain or liver specificity were consistent. Concordance is highest between the two laboratories observing the largest numbers of proteins.

Bayesian Nonparametric Model for the Validation of Peptide Identification in Shotgun Proteomics

Tandem mass spectrometry combined with database searching allows high throughput identification of peptides in shotgun proteomics. However, validating database search results, a problem with a lot of solutions proposed, is still advancing in some aspects, such as the sensitivity, specificity, and generalizability of the validation algorithms. Here a Bayesian nonparametric (BNP) model for the validation of database search results was developed that incorporates several popular techniques in statistical learning, including the compression of feature space with a linear discriminant function, the flexible nonparametric probability density function estimation for the variable probability structure in complex problem, and the Bayesian method to calculate the posterior probability. Importantly the BNP model is compatible with the popular target-decoy database search strategy naturally. We tested the BNP model on standard proteins and real, complex sample data sets from multiple MS platforms and compared it with PeptideProphet, the cutoff-based method, and a simple nonparametric method (proposed by us previously). The performance of the BNP model was shown to be superior for all data sets searched on sensitivity and generalizability. Some high quality matches that had been filtered out by other methods were detected and assigned with high probability by the BNP model. Thus, the BNP model could be able to validate the database search results effectively and extract more information from MS/MS data.

SigFlux: A novel network feature to evaluate the importance of proteins in signal transduction networks

BackgroundMeasuring each proteins importance in signaling networks helps to identify the crucial proteins in a cellular process, find the fragile portion of the biology system and further assist for disease therapy. However, there are relatively few methods to evaluate the importance of proteins in signaling networks.ResultsWe developed a novel network feature to evaluate the importance of proteins in signal transduction networks, that we call SigFlux, based on the concept of minimal path sets (MPSs). An MPS is a minimal set of nodes that can perform the signal propagation from ligands to target genes or feedback loops. We define SigFlux as the number of MPSs in which each protein is involved. We applied this network feature to the large signal transduction network in the hippocampal CA1 neuron of mice. Significant correlations were simultaneously observed between SigFlux and both the essentiality and evolutionary rate of genes. Compared with another commonly used network feature, connectivity, SigFlux has similar or better ability as connectivity to reflect a proteins essentiality. Further classification according to protein function demonstrates that high SigFlux, low connectivity proteins are abundant in receptors and transcriptional factors, indicating that SigFlux candescribe the importance of proteins within the context of the entire network.ConclusionSigFlux is a useful network feature in signal transduction networks that allows the prediction of the essentiality and conservation of proteins. With this novel network feature, proteins that participate in more pathways or feedback loops within a signaling network are proved far more likely to be essential and conserved during evolution than their counterparts.

PepDistiller: A quality control tool to improve the sensitivity and accuracy of peptide identifications in shotgun proteomics

In this study, we presented a quality control tool named PepDistiller to facilitate the validation of MASCOT search results. By including the number of tryptic termini, and integrating a refined false discovery rate (FDR) calculation method, we demonstrated the improved sensitivity of peptide identifications obtained from semitryptic search results. Based on the analysis of a complex data set, approximately 7% more peptide identifications were obtained using PepDistiller than using MASCOT Percolator. Moreover, the refined method generated lower FDR estimations than the percentage of incorrect target (PIT) fixed method applied in Percolator. Using a standard data set, we further demonstrated the increased accuracy of the refined FDR estimations relative to the PIT‐fixed FDR estimations. PepDistiller is fast and convenient to use, and is freely available for academic access. The software can be downloaded from http://www.bprc.ac.cn/pepdistiller.

Relationship between Sample Loading Amount and Peptide Identification and Its Effects on Quantitative Proteomics

The relationship between sample loading amount and peptide identification is crucial for the optimization of proteomics experiments, but few studies have addressed this matter. Herein, we present a systematic study using a replicate run strategy to probe the inherent influence of both peptide physicochemical properties and matrix effects on the relationship between peptide identification and sample loading amounts, as well as its applications in protein quantification. Ten replicate runs for a series of laddered loading amounts (ranging between 0.01 approximately 10 microg) of total digested proteins from Saccharomyces cerevisiae were performed with nanoscale liquid chromatography coupled with linear ion trap/Fourier transform ion cyclotron resonance (nanoLC-LTQ-FT) to obtain a nearly saturated peptide identification. This permitted us to differentiate the linear correlativity of peptide identification by the commonly used peptide quantitative index, the area of constructed ion chromatograms (XIC) (SA, from MS and tandem MS data) in the given experiments. The absolute loading amount of a given complex sample affected the final qualitative identification result; thus, optimization of the sample loading amount before every proteomics study was essential. Peptide physicochemical properties had little effect on the linear correlativity between SA-based peptide quantification and loading amount. The matrix effects, rather than the static physicochemical properties of individual peptides, affect peptide measurability. We also quantified the target protein by selecting peptides with good parallel linear correlativity based upon SA as signature peptides and revised the data by multiplying by the reciprocal of the slope coefficient. We found that this optimized the linear protein abundance relativity at every amount range and thus extended the linear dynamic range of label-free quantification. This empirical rule for linear peptide selection (ERLPS) can be adopted to correct comparison results in proteolytic peptide-based quantitative proteomics, such as accurate mass tag (AMT) and targeted quantitative proteomics, as well as in tag-labeled comparative proteomics.

LFQuant: A label-free fast quantitative analysis tool for high-resolution LC-MS/MS proteomics data

Database searching based methods for label‐free quantification aim to reconstruct the peptide extracted ion chromatogram based on the identification information, which can limit the search space and thus make the data processing much faster. The random effect of the MS/MS sampling can be remedied by cross‐assignment among different runs. Here, we present a new label‐free fast quantitative analysis tool, LFQuant, for high‐resolution LC‐MS/MS proteomics data based on database searching. It is designed to accept raw data in two common formats (mzXML and Thermo RAW), and database search results from mainstream tools (MASCOT, SEQUEST, and X!Tandem), as input data. LFQuant can handle large‐scale label‐free data with fractionation such as SDS‐PAGE and 2D LC. It is easy to use and provides handy user interfaces for data loading, parameter setting, quantitative analysis, and quantitative data visualization. LFQuant was compared with two common quantification software packages, MaxQuant and IDEAL‐Q, on the replication data set and the UPS1 standard data set. The results show that LFQuant performs better than them in terms of both precision and accuracy, and consumes significantly less processing time. LFQuant is freely available under the GNU General Public License v3.0 at http://sourceforge.net/projects/lfquant/.

SILVER: an efficient tool for stable isotope labeling LC-MS data quantitative analysis with quality control methods

SUMMARY With the advance of experimental technologies, different stable isotope labeling methods have been widely applied to quantitative proteomics. Here, we present an efficient tool named SILVER for processing the stable isotope labeling mass spectrometry data. SILVER implements novel methods for quality control of quantification at spectrum, peptide and protein levels, respectively. Several new quantification confidence filters and indices are used to improve the accuracy of quantification results. The performance of SILVER was verified and compared with MaxQuant and Proteome Discoverer using a large-scale dataset and two standard datasets. The results suggest that SILVER shows high accuracy and robustness while consuming much less processing time. Additionally, SILVER provides user-friendly interfaces for parameter setting, result visualization, manual validation and some useful statistics analyses. AVAILABILITY AND IMPLEMENTATION SILVER and its source codes are freely available under the GNU General Public License v3.0 at http://bioinfo.hupo.org.cn/silver.

Proteome-wide Prediction of Self-interacting Proteins Based on Multiple Properties

Self-interacting proteins, whose two or more copies can interact with each other, play important roles in cellular functions and the evolution of protein interaction networks (PINs). Knowing whether a protein can self-interact can contribute to and sometimes is crucial for the elucidation of its functions. Previous related research has mainly focused on the structures and functions of specific self-interacting proteins, whereas knowledge on their overall properties is limited. Meanwhile, the two current most common high throughput protein interaction assays have limited ability to detect self-interactions because of biological artifacts and design limitations, whereas the bioinformatic prediction method of self-interacting proteins is lacking. This study aims to systematically study and predict self-interacting proteins from an overall perspective. We find that compared with other proteins the self-interacting proteins in the structural aspect contain more domains; in the evolutionary aspect they tend to be conserved and ancient; in the functional aspect they are significantly enriched with enzyme genes, housekeeping genes, and drug targets, and in the topological aspect tend to occupy important positions in PINs. Furthermore, based on these features, after feature selection, we use logistic regression to integrate six representative features, including Gene Ontology term, domain, paralogous interactor, enzyme, model organism self-interacting protein, and betweenness centrality in the PIN, to develop a proteome-wide prediction model of self-interacting proteins. Using 5-fold cross-validation and an independent test, this model shows good performance. Finally, the prediction model is developed into a user-friendly web service SLIPPER (SeLf-Interacting Protein PrEdictoR). Users may submit a list of proteins, and then SLIPPER will return the probability_scores measuring their possibility to be self-interacting proteins and various related annotation information. This work helps us understand the role self-interacting proteins play in cellular functions from an overall perspective, and the constructed prediction model may contribute to the high throughput finding of self-interacting proteins and provide clues for elucidating their functions.

A nonparametric model for quality control of database search results in shotgun proteomics

BackgroundAnalysis of complex samples with tandem mass spectrometry (MS/MS) has become routine in proteomic research. However, validation of database search results creates a bottleneck in MS/MS data processing. Recently, methods based on a randomized database have become popular for quality control of database search results. However, a consequent problem is the ignorance of how to combine different database search scores to improve the sensitivity of randomized database methods.ResultsIn this paper, a multivariate nonlinear discriminate function (DF) based on the multivariate nonparametric density estimation technique was used to filter out false-positive database search results with a predictable false positive rate (FPR). Application of this method to control datasets of different instruments (LCQ, LTQ, and LTQ/FT) yielded an estimated FPR close to the actual FPR. As expected, the method was more sensitive when more features were used. Furthermore, the new method was shown to be more sensitive than two commonly used methods on 3 complex sample datasets and 3 control datasets.ConclusionUsing the nonparametric model, a more flexible DF can be obtained, resulting in improved sensitivity and good FPR estimation. This nonparametric statistical technique is a powerful tool for tackling the complexity and diversity of datasets in shotgun proteomics.