Johan Sunnegårdh

Regularized iterative weighted filtered backprojection for helical cone‐beam CT

Contemporary reconstruction methods employed for clinical helical cone-beam computed tomography (CT) are analytical (noniterative) but mathematically nonexact, i.e., the reconstructed image contains so called cone-beam artifacts, especially for higher cone angles. Besides cone artifacts, these methods also suffer from windmill artifacts: alternating dark and bright regions creating spiral-like patterns occurring in the vicinity of high z-direction derivatives. In this article, the authors examine the possibility to suppress cone and windmill artifacts by means of iterative application of nonexact three-dimensional filtered backprojection, where the analytical part of the reconstruction brings about accelerated convergence. Specifically, they base their investigations on the weighted filtered backprojection method [Stierstorfer et al., Phys. Med. Biol. 49, 2209-2218 (2004)]. Enhancement of high frequencies and amplification of noise is a common but unwanted side effect in many acceleration attempts. They have employed linear regularization to avoid these effects and to improve the convergence properties of the iterative scheme. Artifacts and noise, as well as spatial resolution in terms of modulation transfer functions and slice sensitivity profiles have been measured. The results show that for cone angles up to +/-2.78 degrees, cone artifacts are suppressed and windmill artifacts are alleviated within three iterations. Furthermore, regularization parameters controlling spatial resolution can be tuned so that image quality in terms of spatial resolution and noise is preserved. Simulations with higher number of iterations and long objects (exceeding the measured region) verify that the size of the reconstructible region is not reduced, and that the regularization greatly improves the convergence properties of the iterative scheme. Taking these results into account, and the possibilities to extend the proposed method with more accurate modeling of the acquisition process, the authors believe that iterative improvement with non-exact methods is a promising technique for medical CT applications.

Handling of long objects in iterative improvement of nonexact reconstruction in helical cone-beam CT

In medical helical cone-beam CT, it is common that the region-of-interest (ROI) is contained inside the helix cylinder, while the complete object is long and extends outside the top and the bottom of the cylinder. This is the Long Object Problem. Analytical reconstruction methods for helical cone-beam CT have been designed to handle this problem. It has been shown that a moderate amount of over-scanning is sufficient for reconstruction of a certain ROI. The over-scanning projection rays travel both through the ROI, as well as outside the ROI. This is unfortunate for iterative methods since it seems impossible to compute accurate values for the projection rays which travel partly inside and partly outside the ROI. Therefore, it seems that the useful ROI will diminish for every iteration step. We propose the following solution to the problem. First, we reconstruct volume regions also outside the ROI. These volume regions will certainly be incompletely reconstructed, but our experimental results show that they serve well for projection generation. This is rather counter-intuitive and contradictory to our initial assumptions. Second, we use careful extrapolation and masking of projection data. This is not a general necessity, but needed for the chosen iterative algorithm, which includes rebinning and iterative filtered backprojection. Our idea here was to use an approximate reconstruction method which gives cone-beam artifacts and then improve the reconstructed result by iterative filtered backprojection. The experimental results seem very encouraging. The cone-beam artifacts can indeed be removed. Even voxels close to the boundary of the ROI are as well enhanced by the iterative loop as those in the middle of the ROI

Nonlinear regularization of iterative weighted filtered backprojection for helical cone-beam CT

We report on experiments on combining iterative weighted filtered backprojection with nonlinear regularization. The resulting methods allow for contrast dependent resolution. In combination with improved geometrical modeling of the acquisition process, they have the potential to improve high contrast resolution while preserving low contrast image properties.